linux-stable.git/drivers/usb/misc, branch linux-3.2.y

usb: usbtest: fix NULL pointer dereference

2017-11-11T13:34:40+00:00

commit 7c80f9e4a588f1925b07134bb2e3689335f6c6d8 upstream.

If the usbtest driver encounters a device with an IN bulk endpoint but
no OUT bulk endpoint, it will try to dereference a NULL pointer
(out->desc.bEndpointAddress).  The problem can be solved by adding a
missing test.

Signed-off-by: Alan Stern 
Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Signed-off-by: Felipe Balbi 
Signed-off-by: Ben Hutchings

USB: iowarrior: fix info ioctl on big-endian hosts

2017-09-15T17:30:42+00:00

commit dd5ca753fa92fb736b1395db892bd29f78e6d408 upstream.

Drop erroneous le16_to_cpu when returning the USB device speed which is
already in host byte order.

Found using sparse:

	warning: cast to restricted __le16

Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: uss720: fix NULL-deref at probe

2017-07-18T17:38:32+00:00

commit f259ca3eed6e4b79ac3d5c5c9fb259fb46e86217 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Note that the endpoint access that causes the NULL-deref is currently
only used for debugging purposes during probe so the oops only happens
when dynamic debugging is enabled. This means the driver could be
rewritten to continue to accept device with only two endpoints, should
such devices exist.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: idmouse: fix NULL-deref at probe

2017-07-18T17:38:32+00:00

commit b0addd3fa6bcd119be9428996d5d4522479ab240 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: iowarrior: fix NULL-deref in write

2017-07-18T17:38:31+00:00

commit de46e56653de7b3b54baa625bd582635008b8d05 upstream.

Make sure to verify that we have the required interrupt-out endpoint for
IOWarrior56 devices to avoid dereferencing a NULL-pointer in write
should a malicious device lack such an endpoint.

Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

USB: iowarrior: fix NULL-deref at probe

2017-06-05T20:13:52+00:00

commit b7321e81fc369abe353cf094d4f0dc2fe11ab95f upstream.

Make sure to check for the required interrupt-in endpoint to avoid
dereferencing a NULL-pointer should a malicious device lack such an
endpoint.

Note that a fairly recent change purported to fix this issue, but added
an insufficient test on the number of endpoints only, a test which can
now be removed.

Fixes: 4ec0ef3a8212 ("USB: iowarrior: fix oops with malicious USB descriptors")
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

usb: misc: legousbtower: Fix NULL pointer deference

2017-02-23T03:50:50+00:00

commit 2fae9e5a7babada041e2e161699ade2447a01989 upstream.

This patch fixes a NULL pointer dereference caused by a race codition in
the probe function of the legousbtower driver. It re-structures the
probe function to only register the interface after successfully reading
the board's firmware ID.

The probe function does not deregister the usb interface after an error
receiving the devices firmware ID. The device file registered
(/dev/usb/legousbtower%d) may be read/written globally before the probe
function returns. When tower_delete is called in the probe function
(after an r/w has been initiated), core dev structures are deleted while
the file operation functions are still running. If the 0 address is
mappable on the machine, this vulnerability can be used to create a
Local Priviege Escalation exploit via a write-what-where condition by
remapping dev->interrupt_out_buffer in tower_write. A forged USB device
and local program execution would be required for LPE. The USB device
would have to delay the control message in tower_probe and accept
the control urb in tower_open whilst guest code initiated a write to the
device file as tower_delete is called from the error in tower_probe.

This bug has existed since 2003. Patch tested by emulated device.

Reported-by: James Patrick-Evans 
Tested-by: James Patrick-Evans 
Signed-off-by: James Patrick-Evans 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: keep using err()]
Signed-off-by: Ben Hutchings

USB: iowarrior: fix oops with malicious USB descriptors

2016-04-30T22:05:19+00:00

commit 4ec0ef3a82125efc36173062a50624550a900ae0 upstream.

The iowarrior driver expects at least one valid endpoint.  If given
malicious descriptors that specify 0 for the number of endpoints,
it will crash in the probe function.  Ensure there is at least
one endpoint on the interface before using it.

The full report of this issue can be found here:
http://seclists.org/bugtraq/2016/Mar/87

Reported-by: Ralf Spenneberg 
Signed-off-by: Josh Boyer 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: adutux: NULL dereferences on disconnect

2015-02-20T00:49:28+00:00

commit fc625960edecfb57e62c2975d1f155155e28e6ba upstream.

Both "dev->udev" and "interface->dev" are NULL.  These printks are not
very interesting so I just deleted them.

Fixes: 03270634e242 ('USB: Add ADU support for Ontrak ADU devices')
Signed-off-by: Dan Carpenter 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

USB: sisusb: add device id for Magic Control USB video

2014-09-13T22:41:47+00:00

commit 5b6b80aeb21091ed3030b9b6aae597d81326f1aa upstream.

I have a j5 create (JUA210) USB 2 video device and adding it device id
to SIS USB video gets it to work.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings