linux-stable.git/drivers/usb/misc/Kconfig, branch linux-3.16.y Linux kernel stable tree USB: rio500: Remove Rio 500 kernel driver 2019-12-19T15:57:59+00:00 Bastien Nocera hadess@hadess.net 2019-09-23T16:18:43+00:00 d4e732b99857edefa91b39720b472dbaed8b1f82 commit 015664d15270a112c2371d812f03f7c579b35a73 upstream. The Rio500 kernel driver has not been used by Rio500 owners since 2001 not long after the rio500 project added support for a user-space USB stack through the very first versions of usbdevfs and then libusb. Support for the kernel driver was removed from the upstream utilities in 2008: https://gitlab.freedesktop.org/hadess/rio500/commit/943f624ab721eb8281c287650fcc9e2026f6f5db Cc: Cesar Miquel <miquel@df.uba.ar> Signed-off-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: - Also delete CONFIG_USB_RIO500 from arch/powerpc/configs/c2k_defconfig - Drop change to arch/arm/configs/pxa_defconfig - Adjust filename, content] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 015664d15270a112c2371d812f03f7c579b35a73 upstream.

The Rio500 kernel driver has not been used by Rio500 owners since 2001
not long after the rio500 project added support for a user-space USB stack
through the very first versions of usbdevfs and then libusb.

Support for the kernel driver was removed from the upstream utilities
in 2008:
https://gitlab.freedesktop.org/hadess/rio500/commit/943f624ab721eb8281c287650fcc9e2026f6f5db

Cc: Cesar Miquel <miquel@df.uba.ar>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16:
 - Also delete CONFIG_USB_RIO500 from arch/powerpc/configs/c2k_defconfig
 - Drop change to arch/arm/configs/pxa_defconfig
 - Adjust filename, content]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: ELAN: Remove useless "default M" lines 2014-02-11T21:47:13+00:00 Paul Bolle pebolle@tiscali.nl 2014-02-11T12:23:07+00:00 ea17c7c6ad3176fede61b07d5dc6a9abe665fa1a The Kconfig entries for USB_U132_HCD and USB_FTDI_ELAN default to (uppercase) "M". But in Kconfig (lowercase) "m" is a magic symbol. "M" is an ordinary symbol. As "M" is never set these Kconfig symbols will also not be set by default. Since I'm not aware of a reason why these driver should be set by default, let's just drop these lines (that basically do nothing). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The Kconfig entries for USB_U132_HCD and USB_FTDI_ELAN default to
(uppercase) "M". But in Kconfig (lowercase) "m" is a magic symbol. "M"
is an ordinary symbol. As "M" is never set these Kconfig symbols will
also not be set by default.

Since I'm not aware of a reason why these driver should be set by
default, let's just drop these lines (that basically do nothing).

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: misc: usb3503: Fix compile error due to incorrect regmap depedency 2013-10-16T20:52:16+00:00 Matthew Dawson matthew@mjdsystems.ca 2013-10-16T04:11:24+00:00 eea88512f82ebf1336253ead6c476c9cb54bdf0e The USB3503 driver had an incorrect depedency on REGMAP, instead of REGMAP_I2C. This caused the build to fail since the necessary regmap i2c pieces were not available. Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The USB3503 driver had an incorrect depedency on REGMAP, instead of
REGMAP_I2C.  This caused the build to fail since the necessary regmap
i2c pieces were not available.

Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: misc: usb3503: Convert to regmap 2013-08-12T19:20:26+00:00 Mark Brown broonie@linaro.org 2013-08-09T10:41:52+00:00 68b14134be55eca7340b9a8b3ec4cb8f79622a3c This will give access to the diagnostic infrastructure regmap has but the main point is to support future refactoring. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This will give access to the diagnostic infrastructure regmap has but
the main point is to support future refactoring.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: misc: EHSET Test Fixture device driver for host compliance 2013-07-25T18:49:30+00:00 Manu Gautam mgautam@codeaurora.org 2013-07-03T03:13:51+00:00 1353aa53851e3bc7f2c6365753d9c2783c34f882 An Embedded Host High-Speed Electrical Test (EHSET) test fixture is used to initiate test modes on a host controller in order to perform the high speed electrical testing procedure for USB-IF compliance. When this test fixture is connected to a host, it can enumerate as one of several selectable VID/PID pairs, each corresponding to one of the following test modes: * TEST_SE0_NAK * TEST_J * TEST_K * TEST_PACKET * HS_HOST_PORT_SUSPEND_RESUME * SINGLE_STEP_GET_DEV_DESC * SINGLE_STEP_SET_FEATURE The USB EHSET procedure can be found here: http://www.usb.org/developers/onthego/EHSET_v1.01.pdf Signed-off-by: Manu Gautam <mgautam@codeaurora.org> [jackp@codeaurora.org: imported from commit 073c9409 on codeaurora.org; minor cleanup and updated author email] Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
An Embedded Host High-Speed Electrical Test (EHSET) test fixture is
used to initiate test modes on a host controller in order to perform
the high speed electrical testing procedure for USB-IF compliance.
When this test fixture is connected to a host, it can enumerate as
one of several selectable VID/PID pairs, each corresponding to one
of the following test modes:

* TEST_SE0_NAK
* TEST_J
* TEST_K
* TEST_PACKET
* HS_HOST_PORT_SUSPEND_RESUME
* SINGLE_STEP_GET_DEV_DESC
* SINGLE_STEP_SET_FEATURE

The USB EHSET procedure can be found here:
http://www.usb.org/developers/onthego/EHSET_v1.01.pdf

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
[jackp@codeaurora.org: imported from commit 073c9409 on codeaurora.org;
 minor cleanup and updated author email]
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: regroup all depends on USB within an if USB block 2013-04-09T23:49:07+00:00 Florian Fainelli florian@openwrt.org 2013-04-09T12:29:25+00:00 25e11ec4fe5271c4895265ecbb69531e6b0c0dd5 This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch removes the depends on USB from all config symbols in
drivers/usb/host/Kconfig and replace that with an if USB / endif block
as suggested by Alan Stern. Some source ... Kconfig lines have been
shuffled around to permit a better regroupment of the Kconfig files
depending on "config USB" item. No functionnal change is introduced.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: misc: Add USB3503 High-Speed Hub Controller 2013-01-11T20:12:07+00:00 Dongjin Kim tobetter@gmail.com 2012-12-07T20:18:44+00:00 6a099c63650e50ebf7d1259b859a3d230aec4207 This patch adds new driver of SMSC USB3503 USB 2.0 hub controller with HSIC upstream connectivity and three USB 2.0 downstream ports. The specification can be found from 'http://www.smsc.com/index.php?tid=295&pid=325'. The current version have been tested very basic features switching the modes, HUB-MODE and STANDBY-MODE. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch adds new driver of SMSC USB3503 USB 2.0 hub controller with HSIC
upstream connectivity and three USB 2.0 downstream ports. The specification
can be found from 'http://www.smsc.com/index.php?tid=295&pid=325'.

The current version have been tested very basic features switching the modes,
HUB-MODE and STANDBY-MODE.

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ezusb: add dependency to USB 2012-11-26T22:57:20+00:00 Rene Buergel rene.buergel@sohard.de 2012-11-22T18:10:50+00:00 9db72fe6c943852032d9ed863c87e8c02d3cb9da This fixes an error during modpost, when ezusb is built into the kernel while USB is built as module. Signed-off-by: René Bürgel <rene.buergel@sohard.de> Cc: stable <stable@vger.kernel.org> -- Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This fixes an error during modpost, when ezusb is built into the kernel
while USB is built as module.

Signed-off-by: René Bürgel <rene.buergel@sohard.de>
Cc: stable <stable@vger.kernel.org>
--
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc 2012-09-26T21:20:28+00:00 Rene Buergel rene.buergel@sohard.de 2012-09-26T20:20:19+00:00 70c048a238c780c226eb4b115ebaa908cb3b34ec This patch - moves drivers/usb/serial/ezusb.c to drivers/usb/misc/ - renamed CONFIG_USB_EZUSB to CONFIG_USB_EZUSB_FX2 to avoid build errors - adapts Makefiles and Kconfigs switching from bool to tristate for CONFIG_USB_EZUSB_FX2 Signed-off-by: René Bürgel <rene.buergel@sohard.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch
- moves drivers/usb/serial/ezusb.c to drivers/usb/misc/
- renamed CONFIG_USB_EZUSB to CONFIG_USB_EZUSB_FX2 to avoid build errors
- adapts Makefiles and Kconfigs switching from bool to tristate for CONFIG_USB_EZUSB_FX2

Signed-off-by: René Bürgel <rene.buergel@sohard.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: add driver for Meywa-Denki & Kayac YUREX 2010-10-22T17:21:51+00:00 Tomoki Sekiyama tomoki.sekiyama@gmail.com 2010-09-29T03:16:50+00:00 6bc235a2e24a5ef677daee3fd4f74f6cd643e23c Meywa-Denki/Kayac YUREX is a leg-shakes sensor device. See http://bbu.kayac.com/en/about/ for further information. This driver support read/write the leg-shakes counter in the device via a device file /dev/yurex[0-9]*. [minor coding style cleanups fixed by gregkh] Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Meywa-Denki/Kayac YUREX is a leg-shakes sensor device.
See http://bbu.kayac.com/en/about/ for further information.
This driver support read/write the leg-shakes counter in the device
via a device file /dev/yurex[0-9]*.

[minor coding style cleanups fixed by gregkh]

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>