linux-stable.git/drivers/usb/host, branch v6.0.7

xhci: Remove device endpoints from bandwidth list when freeing the device

2022-11-03T15:00:20+00:00

commit 5aed5b7c2430ce318a8e62f752f181e66f0d1053 upstream.

Endpoints are normally deleted from the bandwidth list when they are
dropped, before the virt device is freed.

If xHC host is dying or being removed then the endpoints aren't dropped
cleanly due to functions returning early to avoid interacting with a
non-accessible host controller.

So check and delete endpoints that are still on the bandwidth list when
freeing the virt device.

Solves a list_del corruption kernel crash when unbinding xhci-pci,
caused by xhci_mem_cleanup() when it later tried to delete already freed
endpoints from the bandwidth list.

This only affects hosts that use software bandwidth checking, which
currenty is only the xHC in intel Panther Point PCH (Ivy Bridge)

Cc: stable@vger.kernel.org
Reported-by: Marek Marczykowski-Górecki 
Tested-by: Marek Marczykowski-Górecki 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman

xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices

2022-11-03T15:00:20+00:00

commit a611bf473d1f77b70f7188b5577542cb39b4701b upstream.

For optimal power consumption of USB4 routers the XHCI PCIe endpoint
used for tunneling must be in D3.  Historically this is accomplished
by a long list of PCIe IDs that correspond to these endpoints because
the xhci_hcd driver will not default to allowing runtime PM for all
devices.

As both AMD and Intel have released new products with new XHCI controllers
this list continues to grow. In reviewing the XHCI specification v1.2 on
page 607 there is already a requirement that the PCI power management
states D3hot and D3cold must be supported.

In the quirk list, use this to indicate that runtime PM should be allowed
on XHCI controllers. The following controllers are known to be xHC 1.2 and
dropped explicitly:
* AMD Yellow Carp
* Intel Alder Lake
* Intel Meteor Lake
* Intel Raptor Lake

[keep PCI ID for Alder Lake PCH for recently added quirk -Mathias]

Cc: stable@vger.kernel.org
Suggested-by: Mathias Nyman 
Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf
Signed-off-by: Mario Limonciello 
Reviewed-by: Mika Westerberg 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20221024142720.4122053-4-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman

xhci: Add quirk to reset host back to default state at shutdown

2022-11-03T15:00:20+00:00

commit 34cd2db408d591bc15771cbcc90939ade0a99a21 upstream.

Systems based on Alder Lake P see significant boot time delay if
boot firmware tries to control usb ports in unexpected link states.

This is seen with self-powered usb devices that survive in U3 link
suspended state over S5.

A more generic solution to power off ports at shutdown was attempted in
commit 83810f84ecf1 ("xhci: turn off port power in shutdown")
but it caused regression.

Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and
ports back to default state in shutdown.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman

usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller

2022-11-03T15:00:19+00:00

commit 4f547472380136718b56064ea5689a61e135f904 upstream.

This appears to fix the error:
"xhci_hcd ; ERROR Transfer event TRB DMA ptr not part of
current TD ep_index 2 comp_code 13" that appear spuriously (or pretty
often) when using a r8152 USB3 ethernet adapter with integrated hub.

ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0

Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3

Cc: stable@vger.kernel.org
Signed-off-by: Jens Glathe 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman

usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()

2022-10-21T10:39:23+00:00

[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ]

xhci_alloc_stream_info() allocates stream context array for stream_info
->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs,
stream_info->stream_ctx_array is not released, which will lead to a
memory leak.

We can fix it by releasing the stream_info->stream_ctx_array with
xhci_free_stream_ctx() on the error path to avoid the potential memory
leak.

Signed-off-by: Jianglei Nie 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: host: xhci-plat: suspend/resume clks for brcm

2022-10-21T10:39:21+00:00

[ Upstream commit c69400b09e471a3f1167adead55a808f0da6534a ]

The xhci_plat_brcm xhci block can enter suspend with clock disabled to save
power and re-enable them on resume. Make use of the XHCI_SUSPEND_RESUME_CLKS
quirk to do so.

Reviewed-by: Florian Fainelli 
Signed-off-by: Justin Chen 
Link: https://lore.kernel.org/r/1660170455-15781-3-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: host: xhci-plat: suspend and resume clocks

2022-10-21T10:39:21+00:00

[ Upstream commit 8bd954c56197caf5e3a804d989094bc3fe6329aa ]

Introduce XHCI_SUSPEND_RESUME_CLKS quirk as a means to suspend and resume
clocks if the hardware is capable of doing so. We assume that clocks will
be needed if the device may wake.

Reviewed-by: Florian Fainelli 
Signed-off-by: Justin Chen 
Link: https://lore.kernel.org/r/1660170455-15781-2-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

xhci: Don't show warning for reinit on known broken suspend

2022-10-21T10:38:48+00:00

[ Upstream commit 484d6f7aa3283d082c87654b7fe7a7f725423dfb ]

commit 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was
set") introduced a new warning message when the host controller error
was set and re-initializing.

This is expected behavior on some designs which already set
`xhci->broken_suspend` so the new warning is alarming to some users.

Modify the code to only show the warning if this was a surprising behavior
to the XHCI driver.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216470
Fixes: 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set")
Reported-by: Artem S. Tashkinov 
Signed-off-by: Mario Limonciello 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20220921123450.671459-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

xhci: dbc: Fix memory leak in xhci_alloc_dbc()

2022-10-21T10:37:35+00:00

commit d591b32e519603524a35b172156db71df9116902 upstream.

If DbC is already in use, then the allocated memory for the xhci_dbc struct
doesn't get freed before returning NULL, which leads to a memleak.

Fixes: 534675942e90 ("xhci: dbc: refactor xhci_dbc_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20220921123450.671459-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

Revert "xhci: turn off port power in shutdown"

2022-08-25T15:48:30+00:00

This reverts commit 83810f84ecf11dfc5a9414a8b762c3501b328185.

Turning off port power in shutdown did cause issues such as a laptop not
proprly powering off, and some specific usb devies failing to enumerate the
subsequent boot after a warm reset.

So revert this.

Fixes: 83810f84ecf1 ("xhci: turn off port power in shutdown")
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman