linux-stable.git/drivers/usb/host, branch v5.4.277 Linux kernel stable tree usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined 2024-04-13T10:51:39+00:00 Colin Ian King colin.i.king@gmail.com 2024-03-07T11:13:51+00:00 0eab73ffb687e5250b64cfbc5273140d4950ce86 [ Upstream commit 12f371e2b6cb4b79c788f1f073992e115f4ca918 ] Function checkdone is only required if QUIRK2 is defined, so add appropriate #if / #endif around the function. Cleans up clang scan build warning: drivers/usb/host/sl811-hcd.c:588:18: warning: unused function 'checkdone' [-Wunused-function] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240307111351.1982382-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 12f371e2b6cb4b79c788f1f073992e115f4ca918 ]

Function checkdone is only required if QUIRK2 is defined, so add
appropriate #if / #endif around the function.

Cleans up clang scan build warning:
drivers/usb/host/sl811-hcd.c:588:18: warning: unused function
'checkdone' [-Wunused-function]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240307111351.1982382-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: fotg210-hcd: delete an incorrect bounds test 2024-01-08T10:29:47+00:00 Dan Carpenter dan.carpenter@linaro.org 2023-12-13T13:22:43+00:00 644b956c946aa76e07c5f86d3786e82041f714ac [ Upstream commit 7fbcd195e2b8cc952e4aeaeb50867b798040314c ] Here "temp" is the number of characters that we have written and "size" is the size of the buffer. The intent was clearly to say that if we have written to the end of the buffer then stop. However, for that to work the comparison should have been done on the original "size" value instead of the "size -= temp" value. Not only will that not trigger when we want to, but there is a small chance that it will trigger incorrectly before we want it to and we break from the loop slightly earlier than intended. This code was recently changed from using snprintf() to scnprintf(). With snprintf() we likely would have continued looping and passed a negative size parameter to snprintf(). This would have triggered an annoying WARN(). Now that we have converted to scnprintf() "size" will never drop below 1 and there is no real need for this test. We could change the condition to "if (temp <= 1) goto done;" but just deleting the test is cleanest. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Cc: stable <stable@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7fbcd195e2b8cc952e4aeaeb50867b798040314c ]

Here "temp" is the number of characters that we have written and "size"
is the size of the buffer.  The intent was clearly to say that if we have
written to the end of the buffer then stop.

However, for that to work the comparison should have been done on the
original "size" value instead of the "size -= temp" value.  Not only
will that not trigger when we want to, but there is a small chance that
it will trigger incorrectly before we want it to and we break from the
loop slightly earlier than intended.

This code was recently changed from using snprintf() to scnprintf().  With
snprintf() we likely would have continued looping and passed a negative
size parameter to snprintf().  This would have triggered an annoying
WARN().  Now that we have converted to scnprintf() "size" will never
drop below 1 and there is no real need for this test.  We could change
the condition to "if (temp <= 1) goto done;" but just deleting the test
is cleanest.

Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer 2023-10-25T09:53:18+00:00 Wesley Cheng quic_wcheng@quicinc.com 2023-09-15T14:31:05+00:00 57942b0763cff66c93c62df31567b84eb4029dda commit 41a43013d2366db5b88b42bbcd8e8f040b6ccf21 upstream. As mentioned in: commit 474ed23a6257 ("xhci: align the last trb before link if it is easily splittable.") A bounce buffer is utilized for ensuring that transfers that span across ring segments are aligned to the EP's max packet size. However, the device that is used to map the DMA buffer to is currently using the XHCI HCD, which does not carry any DMA operations in certain configrations. Migration to using the sysdev entry was introduced for DWC3 based implementations where the IOMMU operations are present. Replace the reference to the controller device to sysdev instead. This allows the bounce buffer to be properly mapped to any implementations that have an IOMMU involved. cc: stable@vger.kernel.org Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 41a43013d2366db5b88b42bbcd8e8f040b6ccf21 upstream.

As mentioned in:
  commit 474ed23a6257 ("xhci: align the last trb before link if it is
easily splittable.")

A bounce buffer is utilized for ensuring that transfers that span across
ring segments are aligned to the EP's max packet size.  However, the device
that is used to map the DMA buffer to is currently using the XHCI HCD,
which does not carry any DMA operations in certain configrations.
Migration to using the sysdev entry was introduced for DWC3 based
implementations where the IOMMU operations are present.

Replace the reference to the controller device to sysdev instead.  This
allows the bounce buffer to be properly mapped to any implementations that
have an IOMMU involved.

cc: stable@vger.kernel.org
Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration")
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230915143108.1532163-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "usb: xhci: tegra: Fix error check" 2023-08-11T09:53:51+00:00 Dan Carpenter dan.carpenter@linaro.org 2023-07-04T14:08:27+00:00 fd21197af5753ea4c114752db0aba80aa9f27af9 commit 288b4fa1798e3637a9304c6e90a93d900e02369c upstream. This reverts commit 18fc7c435be3f17ea26a21b2e2312fcb9088e01f. The reverted commit was based on static analysis and a misunderstanding of how PTR_ERR() and NULLs are supposed to work. When a function returns both pointer errors and NULL then normally the NULL means "continue operating without a feature because it was deliberately turned off". The NULL should not be treated as a failure. If a driver cannot work when that feature is disabled then the KConfig should enforce that the function cannot return NULL. We should not need to test for it. In this code, the patch means that certain tegra_xusb_probe() will fail if the firmware supports power-domains but CONFIG_PM is disabled. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 18fc7c435be3 ("usb: xhci: tegra: Fix error check") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/8baace8d-fb4b-41a4-ad5f-848ae643a23b@moroto.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 288b4fa1798e3637a9304c6e90a93d900e02369c upstream.

This reverts commit 18fc7c435be3f17ea26a21b2e2312fcb9088e01f.

The reverted commit was based on static analysis and a misunderstanding
of how PTR_ERR() and NULLs are supposed to work.  When a function
returns both pointer errors and NULL then normally the NULL means
"continue operating without a feature because it was deliberately
turned off".  The NULL should not be treated as a failure.  If a driver
cannot work when that feature is disabled then the KConfig should
enforce that the function cannot return NULL.  We should not need to
test for it.

In this code, the patch means that certain tegra_xusb_probe() will
fail if the firmware supports power-domains but CONFIG_PM is disabled.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 18fc7c435be3 ("usb: xhci: tegra: Fix error check")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/8baace8d-fb4b-41a4-ad5f-848ae643a23b@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci-mtk: set the dma max_seg_size 2023-08-11T09:53:51+00:00 Ricardo Ribalda ribalda@chromium.org 2023-07-19T13:01:04+00:00 e0c92c32913182fa550a6e5d628c8ff0080598e6 commit 9fd10829a9eb482e192a845675ecc5480e0bfa10 upstream. Allow devices to have dma operations beyond 64K, and avoid warnings such as: DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536] Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller") Cc: stable <stable@kernel.org> Tested-by: Zubin Mithra <zsm@chromium.org> Reported-by: Zubin Mithra <zsm@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20230628-mtk-usb-v2-1-c8c34eb9f229@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9fd10829a9eb482e192a845675ecc5480e0bfa10 upstream.

Allow devices to have dma operations beyond 64K, and avoid warnings such
as:

DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536]

Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
Cc: stable <stable@kernel.org>
Tested-by: Zubin Mithra <zsm@chromium.org>
Reported-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20230628-mtk-usb-v2-1-c8c34eb9f229@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: ohci-at91: Fix the unhandle interrupt when resume 2023-08-11T09:53:51+00:00 Guiting Shen aarongt.shen@gmail.com 2023-06-26T15:27:13+00:00 8f86b1b3b539d5a6fa94368f8f0c2ad3abeed8af commit c55afcbeaa7a6f4fffdbc999a9bf3f0b29a5186f upstream. The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when suspend which will let the ohci_irq() skip the interrupt after resume. And nobody to handle this interrupt. According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset when resume from suspend(MEM) to fix by setting "hibernated" argument of ohci_resume(). Signed-off-by: Guiting Shen <aarongt.shen@gmail.com> Cc: stable <stable@kernel.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230626152713.18950-1-aarongt.shen@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c55afcbeaa7a6f4fffdbc999a9bf3f0b29a5186f upstream.

The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
suspend which will let the ohci_irq() skip the interrupt after resume. And
nobody to handle this interrupt.

According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset
when resume from suspend(MEM) to fix by setting "hibernated" argument of
ohci_resume().

Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230626152713.18950-1-aarongt.shen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value 2023-05-30T11:44:06+00:00 Weitao Wang WeitaoWang-oc@zhaoxin.com 2023-04-23T10:59:52+00:00 241491524ab01dc8c4946606867d764197c9d624 commit dddb342b5b9e482bb213aecc08cbdb201ea4f8da upstream. OverCurrent condition is not standardized in the UHCI spec. Zhaoxin UHCI controllers report OverCurrent bit active off. In order to handle OverCurrent condition correctly, the uhci-hcd driver needs to be told to expect the active-off behavior. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230423105952.4526-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dddb342b5b9e482bb213aecc08cbdb201ea4f8da upstream.

OverCurrent condition is not standardized in the UHCI spec.
Zhaoxin UHCI controllers report OverCurrent bit active off.
In order to handle OverCurrent condition correctly, the uhci-hcd
driver needs to be told to expect the active-off behavior.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230423105952.4526-1-WeitaoWang-oc@zhaoxin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: xhci-rcar: remove leftover quirk handling 2023-05-17T09:35:45+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2023-03-07T16:30:37+00:00 3fb02404c1e09194922733e16949e60e5b9fcd34 [ Upstream commit 5d67f4861884762ebc2bddb5d667444e45f25782 ] Loading V3 firmware does not need a quirk anymore, remove the leftover code. Fixes: ed8603e11124 ("usb: host: xhci-rcar: Simplify getting the firmware name for R-Car Gen3") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20230307163041.3815-10-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5d67f4861884762ebc2bddb5d667444e45f25782 ]

Loading V3 firmware does not need a quirk anymore, remove the leftover
code.

Fixes: ed8603e11124 ("usb: host: xhci-rcar: Simplify getting the firmware name for R-Car Gen3")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20230307163041.3815-10-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
xhci: fix debugfs register accesses while suspended 2023-05-17T09:35:32+00:00 Johan Hovold johan+linaro@kernel.org 2023-04-05T09:03:42+00:00 3092933b2637f9877a965312969f8ac3a8fe227b commit 735baf1b23458f71a8b15cb924af22c9ff9cd125 upstream. Wire up the debugfs regset device pointer so that the controller is resumed before accessing registers to avoid crashing or locking up if it happens to be runtime suspended. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: stable@vger.kernel.org # 4.15: 30332eeefec8: debugfs: regset32: Add Runtime PM support Cc: stable@vger.kernel.org # 4.15 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230405090342.7363-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 735baf1b23458f71a8b15cb924af22c9ff9cd125 upstream.

Wire up the debugfs regset device pointer so that the controller is
resumed before accessing registers to avoid crashing or locking up if it
happens to be runtime suspended.

Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver")
Cc: stable@vger.kernel.org # 4.15: 30332eeefec8: debugfs: regset32: Add Runtime PM support
Cc: stable@vger.kernel.org # 4.15
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230405090342.7363-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommu 2023-04-20T10:07:33+00:00 D Scott Phillips scott@os.amperecomputing.com 2023-03-30T14:30:54+00:00 47132be17d7baec4f4ad03461e3bc8d1236b8e21 commit ecaa4902439298f6b0e29f47424a86b310a9ff4f upstream. Previously the quirk was skipped when no iommu was present. The same rationale for skipping the quirk also applies in the iommu.passthrough=1 case. Skip applying the XHCI_ZERO_64B_REGS quirk if the device's iommu domain is passthrough. Fixes: 12de0a35c996 ("xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers") Cc: stable <stable@kernel.org> Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230330143056.1390020-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ecaa4902439298f6b0e29f47424a86b310a9ff4f upstream.

Previously the quirk was skipped when no iommu was present. The same
rationale for skipping the quirk also applies in the iommu.passthrough=1
case.

Skip applying the XHCI_ZERO_64B_REGS quirk if the device's iommu domain is
passthrough.

Fixes: 12de0a35c996 ("xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers")
Cc: stable <stable@kernel.org>
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230330143056.1390020-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>