linux-stable.git/drivers/usb/host, branch v5.4.166 Linux kernel stable tree xhci: avoid race between disable slot command and host runtime suspend 2021-12-14T13:49:04+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2021-12-10T14:17:35+00:00 ec0cddcc2454ab08193beb473978f8f8889b7e24 commit 7faac1953ed1f658f719cdf7bb7303fa5eef822c upstream. Make xhci_disable_slot() synchronous, thus ensuring it, and xhci_free_dev() calling it return after xHC controller completes the disable slot command. Otherwise the roothub and xHC host may runtime suspend, and clear the command ring while the disable slot command is being processed. This causes a command completion mismatch as the completion event can't be mapped to the correct command. Command ring gets out of sync and commands time out. Driver finally assumes host is unresponsive and bails out. usb 2-4: USB disconnect, device number 10 xhci_hcd 0000:00:0d.0: ERROR mismatched command completion event ... xhci_hcd 0000:00:0d.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:0d.0: HC died; cleaning up Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211210141735.1384209-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7faac1953ed1f658f719cdf7bb7303fa5eef822c upstream.

Make xhci_disable_slot() synchronous, thus ensuring it, and
xhci_free_dev() calling it return after xHC controller completes
the disable slot command.

Otherwise the roothub and xHC host may runtime suspend, and clear the
command ring while the disable slot command is being processed.

This causes a command completion mismatch as the completion event can't
be mapped to the correct command.
Command ring gets out of sync and commands time out.
Driver finally assumes host is unresponsive and bails out.

usb 2-4: USB disconnect, device number 10
xhci_hcd 0000:00:0d.0: ERROR mismatched command completion event
...
xhci_hcd 0000:00:0d.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:00:0d.0: HC died; cleaning up

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210141735.1384209-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending 2021-12-14T13:49:04+00:00 Kai-Heng Feng kai.heng.feng@canonical.com 2021-12-10T14:17:34+00:00 d1eee0a3936f7cb3f35fadcab0dcf28bf9d34af4 commit 811ae81320da53a5670c36970cefacca8519f90e upstream. When the xHCI is quirked with XHCI_RESET_ON_RESUME, runtime resume routine also resets the controller. This is bad for USB drivers without reset_resume callback, because there's no subsequent call of usb_dev_complete() -> usb_resume_complete() to force rebinding the driver to the device. For instance, btusb device stops working after xHCI controller is runtime resumed, if the controlled is quirked with XHCI_RESET_ON_RESUME. So always take XHCI_RESET_ON_RESUME into account to solve the issue. Cc: <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211210141735.1384209-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 811ae81320da53a5670c36970cefacca8519f90e upstream.

When the xHCI is quirked with XHCI_RESET_ON_RESUME, runtime resume
routine also resets the controller.

This is bad for USB drivers without reset_resume callback, because
there's no subsequent call of usb_dev_complete() ->
usb_resume_complete() to force rebinding the driver to the device. For
instance, btusb device stops working after xHCI controller is runtime
resumed, if the controlled is quirked with XHCI_RESET_ON_RESUME.

So always take XHCI_RESET_ON_RESUME into account to solve the issue.

Cc: <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211210141735.1384209-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix commad ring abort, write all 64 bits to CRCR register. 2021-12-08T08:01:13+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2021-11-26T12:23:40+00:00 095a39a2cc273d7a7a96a4ead75e3216314060c2 commit 09f736aa95476631227d2dc0e6b9aeee1ad7ed58 upstream. Turns out some xHC controllers require all 64 bits in the CRCR register to be written to execute a command abort. The lower 32 bits containing the command abort bit is written first. In case the command ring stops before we write the upper 32 bits then hardware may use these upper bits to set the commnd ring dequeue pointer. Solve this by making sure the upper 32 bits contain a valid command ring dequeue pointer. The original patch that only wrote the first 32 to stop the ring went to stable, so this fix should go there as well. Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command") Cc: stable@vger.kernel.org Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 09f736aa95476631227d2dc0e6b9aeee1ad7ed58 upstream.

Turns out some xHC controllers require all 64 bits in the CRCR register
to be written to execute a command abort.

The lower 32 bits containing the command abort bit is written first.
In case the command ring stops before we write the upper 32 bits then
hardware may use these upper bits to set the commnd ring dequeue pointer.

Solve this by making sure the upper 32 bits contain a valid command
ring dequeue pointer.

The original patch that only wrote the first 32 to stop the ring went
to stable, so this fix should go there as well.

Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command")
Cc: stable@vger.kernel.org
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: max-3421: Use driver data instead of maintaining a list of bound devices 2021-11-26T09:47:23+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2021-10-18T20:40:28+00:00 101485e566ce6fe5454d0c4b069e05986885a94c commit fc153aba3ef371d0d76eb88230ed4e0dee5b38f2 upstream. Instead of maintaining a single-linked list of devices that must be searched linearly in .remove() just use spi_set_drvdata() to remember the link between the spi device and the driver struct. Then the global list and the next member can be dropped. This simplifies the driver, reduces the memory footprint and the time to search the list. Also it makes obvious that there is always a corresponding driver struct for a given device in .remove(), so the error path for !max3421_hcd can be dropped, too. As a side effect this fixes a data inconsistency when .probe() races with itself for a second max3421 device in manipulating max3421_hcd_list. A similar race is fixed in .remove(), too. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fc153aba3ef371d0d76eb88230ed4e0dee5b38f2 upstream.

Instead of maintaining a single-linked list of devices that must be
searched linearly in .remove() just use spi_set_drvdata() to remember the
link between the spi device and the driver struct. Then the global list
and the next member can be dropped.

This simplifies the driver, reduces the memory footprint and the time to
search the list. Also it makes obvious that there is always a corresponding
driver struct for a given device in .remove(), so the error path for
!max3421_hcd can be dropped, too.

As a side effect this fixes a data inconsistency when .probe() races with
itself for a second max3421 device in manipulating max3421_hcd_list. A
similar race is fixed in .remove(), too.

Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: ohci-tmio: check return value after calling platform_get_resource() 2021-11-26T09:47:15+00:00 Yang Yingliang yangyingliang@huawei.com 2021-10-11T13:49:20+00:00 f98986b7acb4219f95789095eced93ed69d81d35 [ Upstream commit 9eff2b2e59fda25051ab36cd1cb5014661df657b ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211011134920.118477-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9eff2b2e59fda25051ab36cd1cb5014661df657b ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211011134920.118477-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: xhci: Enable runtime-pm by default on AMD Yellow Carp platform 2021-11-17T08:48:16+00:00 Nehal Bakulchandra Shah Nehal-Bakulchandra.shah@amd.com 2021-10-14T12:12:00+00:00 3e87c4996de192ec5369f4a79098dfec7fe8447c commit 660a92a59b9e831a0407e41ff62875656d30006e upstream. AMD's Yellow Carp platform supports runtime power management for XHCI Controllers, so enable the same by default for all XHCI Controllers. [ regrouped and aligned the PCI_DEVICE_ID definitions -Mathias] Cc: stable <stable@vger.kernel.org> Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211014121200.75433-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 660a92a59b9e831a0407e41ff62875656d30006e upstream.

AMD's Yellow Carp platform supports runtime power management for
XHCI Controllers, so enable the same by default for all XHCI Controllers.

[ regrouped and aligned the PCI_DEVICE_ID definitions -Mathias]

Cc: stable <stable@vger.kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211014121200.75433-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay 2021-11-17T08:48:16+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2021-11-05T16:00:36+00:00 3fa7efd1fab1b98af893ba674dcb012db8b08229 commit e1959faf085b004e6c3afaaaa743381f00e7c015 upstream. Some USB 3.1 enumeration issues were reported after the hub driver removed the minimum 100ms limit for the power-on-good delay. Since commit 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub") the hub driver sets the power-on-delay based on the bPwrOn2PwrGood value in the hub descriptor. xhci driver has a 20ms bPwrOn2PwrGood value for both roothubs based on xhci spec section 5.4.8, but it's clearly not enough for the USB 3.1 devices, causing enumeration issues. Tests indicate full 100ms delay is needed. Reported-by: Walt Jr. Brake <mr.yming81@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Fixes: 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211105160036.549516-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e1959faf085b004e6c3afaaaa743381f00e7c015 upstream.

Some USB 3.1 enumeration issues were reported after the hub driver removed
the minimum 100ms limit for the power-on-good delay.

Since commit 90d28fb53d4a ("usb: core: reduce power-on-good delay time of
root hub") the hub driver sets the power-on-delay based on the
bPwrOn2PwrGood value in the hub descriptor.

xhci driver has a 20ms bPwrOn2PwrGood value for both roothubs based
on xhci spec section 5.4.8, but it's clearly not enough for the
USB 3.1 devices, causing enumeration issues.

Tests indicate full 100ms delay is needed.

Reported-by: Walt Jr. Brake <mr.yming81@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211105160036.549516-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: ehci: handshake CMD_RUN instead of STS_HALT 2021-11-12T13:43:02+00:00 Neal Liu neal_liu@aspeedtech.com 2021-09-10T07:36:19+00:00 d6013265a779d685a6e88b3f2af065e8855c2877 commit 7f2d73788d9067fd4f677ac5f60ffd25945af7af upstream. For Aspeed, HCHalted status depends on not only Run/Stop but also ASS/PSS status. Handshake CMD_RUN on startup instead. Tested-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@aspeedtech.com Cc: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7f2d73788d9067fd4f677ac5f60ffd25945af7af upstream.

For Aspeed, HCHalted status depends on not only Run/Stop but also
ASS/PSS status.
Handshake CMD_RUN on startup instead.

Tested-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@aspeedtech.com
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "xhci: Set HCD flag to defer primary roothub registration" 2021-11-06T12:59:45+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2021-11-03T15:51:12+00:00 049849492b77aa0df7f7130f1d522f3553c4084b This reverts commit 2d7c20db7220bc8dbc560de6e58f024696c790e5 which is commit b7a0a792f864583207c593b50fd1b752ed89f4c1 upstream. It has been reported to be causing problems in Arch and Fedora bug reports. Reported-by: Hans de Goede <hdegoede@redhat.com> Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576 Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Chris Chiu <chris.chiu@canonical.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit 2d7c20db7220bc8dbc560de6e58f024696c790e5 which is
commit b7a0a792f864583207c593b50fd1b752ed89f4c1 upstream.

It has been reported to be causing problems in Arch and Fedora bug
reports.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576
Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Chris Chiu <chris.chiu@canonical.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Enable trust tx length quirk for Fresco FL11 USB controller 2021-10-20T09:40:13+00:00 Nikolay Martynov mar.kolya@gmail.com 2021-10-08T09:25:47+00:00 e71ce4a81ed4ee86b44c3f37fce2c7390a248960 commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream. Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host Controller. Before this patch streaming video from USB cam made mouse and keyboard connected to the same USB bus unusable. Also video was jerky. With this patch streaming video doesn't have any effect on other periferals and video is smooth. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream.

Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host
Controller.
Before this patch streaming video from USB cam made mouse and keyboard
connected to the same USB bus unusable. Also video was jerky.
With this patch streaming video doesn't have any effect on other
periferals and video is smooth.

Cc: stable@vger.kernel.org
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>