linux-stable.git/drivers/usb/host, branch v5.4.158 Linux kernel stable tree Revert "xhci: Set HCD flag to defer primary roothub registration" 2021-11-06T12:59:45+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2021-11-03T15:51:12+00:00 049849492b77aa0df7f7130f1d522f3553c4084b This reverts commit 2d7c20db7220bc8dbc560de6e58f024696c790e5 which is commit b7a0a792f864583207c593b50fd1b752ed89f4c1 upstream. It has been reported to be causing problems in Arch and Fedora bug reports. Reported-by: Hans de Goede <hdegoede@redhat.com> Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576 Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Chris Chiu <chris.chiu@canonical.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit 2d7c20db7220bc8dbc560de6e58f024696c790e5 which is
commit b7a0a792f864583207c593b50fd1b752ed89f4c1 upstream.

It has been reported to be causing problems in Arch and Fedora bug
reports.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576
Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Chris Chiu <chris.chiu@canonical.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Enable trust tx length quirk for Fresco FL11 USB controller 2021-10-20T09:40:13+00:00 Nikolay Martynov mar.kolya@gmail.com 2021-10-08T09:25:47+00:00 e71ce4a81ed4ee86b44c3f37fce2c7390a248960 commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream. Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host Controller. Before this patch streaming video from USB cam made mouse and keyboard connected to the same USB bus unusable. Also video was jerky. With this patch streaming video doesn't have any effect on other periferals and video is smooth. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream.

Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host
Controller.
Before this patch streaming video from USB cam made mouse and keyboard
connected to the same USB bus unusable. Also video was jerky.
With this patch streaming video doesn't have any effect on other
periferals and video is smooth.

Cc: stable@vger.kernel.org
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix command ring pointer corruption while aborting a command 2021-10-20T09:40:13+00:00 Pavankumar Kondeti pkondeti@codeaurora.org 2021-10-08T09:25:46+00:00 01c2dcb67e71c351006dd17cbba86c26b7f61eaf commit ff0e50d3564f33b7f4b35cadeabd951d66cfc570 upstream. The command ring pointer is located at [6:63] bits of the command ring control register (CRCR). All the control bits like command stop, abort are located at [0:3] bits. While aborting a command, we read the CRCR and set the abort bit and write to the CRCR. The read will always give command ring pointer as all zeros. So we essentially write only the control bits. Since we split the 64 bit write into two 32 bit writes, there is a possibility of xHC command ring stopped before the upper dword (all zeros) is written. If that happens, xHC updates the upper dword of its internal command ring pointer with all zeros. Next time, when the command ring is restarted, we see xHC memory access failures. Fix this issue by only writing to the lower dword of CRCR where all control bits are located. Cc: stable@vger.kernel.org Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ff0e50d3564f33b7f4b35cadeabd951d66cfc570 upstream.

The command ring pointer is located at [6:63] bits of the command
ring control register (CRCR). All the control bits like command stop,
abort are located at [0:3] bits. While aborting a command, we read the
CRCR and set the abort bit and write to the CRCR. The read will always
give command ring pointer as all zeros. So we essentially write only
the control bits. Since we split the 64 bit write into two 32 bit writes,
there is a possibility of xHC command ring stopped before the upper
dword (all zeros) is written. If that happens, xHC updates the upper
dword of its internal command ring pointer with all zeros. Next time,
when the command ring is restarted, we see xHC memory access failures.
Fix this issue by only writing to the lower dword of CRCR where all
control bits are located.

Cc: stable@vger.kernel.org
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: guard accesses to ep_state in xhci_endpoint_reset() 2021-10-20T09:40:13+00:00 Jonathan Bell jonathan@raspberrypi.com 2021-10-08T09:25:43+00:00 7ce7d4a46d6eb29fdc94dae8fb67d1ea2908a3bf commit a01ba2a3378be85538e0183ae5367c1bc1d5aaf3 upstream. See https://github.com/raspberrypi/linux/issues/3981 Two read-modify-write cycles on ep->ep_state are not guarded by xhci->lock. Fix these. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@vger.kernel.org Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a01ba2a3378be85538e0183ae5367c1bc1d5aaf3 upstream.

See https://github.com/raspberrypi/linux/issues/3981

Two read-modify-write cycles on ep->ep_state are not guarded by
xhci->lock. Fix these.

Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset")
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Set HCD flag to defer primary roothub registration 2021-09-30T08:09:22+00:00 Kishon Vijay Abraham I kishon@ti.com 2021-09-09T06:41:59+00:00 2d7c20db7220bc8dbc560de6e58f024696c790e5 commit b7a0a792f864583207c593b50fd1b752ed89f4c1 upstream. Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer registering primary roothub in usb_add_hcd(). This will make sure both primary roothub and secondary roothub will be registered along with the second HCD. This is required for cold plugged USB devices to be detected in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM or J7200 EVM). CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b7a0a792f864583207c593b50fd1b752ed89f4c1 upstream.

Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer
registering primary roothub in usb_add_hcd(). This will make sure both
primary roothub and secondary roothub will be registered along with the
second HCD. This is required for cold plugged USB devices to be detected
in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM
or J7200 EVM).

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set" 2021-09-22T10:26:35+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2021-08-20T12:35:01+00:00 d24381e5a73b84a9c89912ae524b115ccd9b4c67 [ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ] This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760. That commit effectively disabled Intel host initiated U1/U2 lpm for devices with periodic endpoints. Before that commit we disabled host initiated U1/U2 lpm if the exit latency was larger than any periodic endpoint service interval, this is according to xhci spec xhci 1.1 specification section 4.23.5.2 After that commit we incorrectly checked that service interval was smaller than U1/U2 inactivity timeout. This is not relevant, and can't happen for Intel hosts as previously set U1/U2 timeout = 105% * service interval. Patch claimed it solved cases where devices can't be enumerated because of bandwidth issues. This might be true but it's a side effect of accidentally turning off lpm. exit latency calculations have been revised since then Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ]

This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.

That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.

Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2

After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.

Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.

exit latency calculations have been revised since then

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
USB: EHCI: ehci-mv: improve error handling in mv_ehci_enable() 2021-09-22T10:26:28+00:00 Evgeny Novikov novikov@ispras.ru 2021-07-08T08:30:56+00:00 44bbd4e6366f01ef8d5dc5c608b4669b8f36b79f [ Upstream commit 61136a12cbed234374ec6f588af57c580b20b772 ] mv_ehci_enable() did not disable and unprepare clocks in case of failures of phy_init(). Besides, it did not take into account failures of ehci_clock_enable() (in effect, failures of clk_prepare_enable()). The patch fixes both issues and gets rid of redundant wrappers around clk_prepare_enable() and clk_disable_unprepare() to simplify this a bit. Found by Linux Driver Verification project (linuxtesting.org). Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Link: https://lore.kernel.org/r/20210708083056.21543-1-novikov@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 61136a12cbed234374ec6f588af57c580b20b772 ]

mv_ehci_enable() did not disable and unprepare clocks in case of
failures of phy_init(). Besides, it did not take into account failures
of ehci_clock_enable() (in effect, failures of clk_prepare_enable()).
The patch fixes both issues and gets rid of redundant wrappers around
clk_prepare_enable() and clk_disable_unprepare() to simplify this a bit.

Found by Linux Driver Verification project (linuxtesting.org).

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Link: https://lore.kernel.org/r/20210708083056.21543-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: host: fotg210: fix the actual_length of an iso packet 2021-09-22T10:26:28+00:00 Kelly Devilliv kelly.devilliv@gmail.com 2021-06-27T12:57:47+00:00 e1480bcb407e31f243f4e65e034c23fcf4b13ed5 [ Upstream commit 091cb2f782f32ab68c6f5f326d7868683d3d4875 ] We should acquire the actual_length of an iso packet from the iTD directly using FOTG210_ITD_LENGTH() macro. Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com> Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 091cb2f782f32ab68c6f5f326d7868683d3d4875 ]

We should acquire the actual_length of an iso packet
from the iTD directly using FOTG210_ITD_LENGTH() macro.

Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: host: fotg210: fix the endpoint's transactional opportunities calculation 2021-09-22T10:26:28+00:00 Kelly Devilliv kelly.devilliv@gmail.com 2021-06-27T12:57:46+00:00 33109bdf2c41315cbd1afc8c20dca9a4fdf1951d [ Upstream commit c2e898764245c852bc8ee4857613ba4f3a6d761d ] Now that usb_endpoint_maxp() only returns the lowest 11 bits from wMaxPacketSize, we should make use of the usb_endpoint_* helpers instead and remove the unnecessary max_packet()/hb_mult() macro. Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com> Link: https://lore.kernel.org/r/20210627125747.127646-3-kelly.devilliv@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c2e898764245c852bc8ee4857613ba4f3a6d761d ]

Now that usb_endpoint_maxp() only returns the lowest
11 bits from wMaxPacketSize, we should make use of the
usb_endpoint_* helpers instead and remove the unnecessary
max_packet()/hb_mult() macro.

Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-3-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: ehci-orion: Handle errors of clk_prepare_enable() in probe 2021-09-15T07:47:36+00:00 Evgeny Novikov novikov@ispras.ru 2021-08-25T17:09:02+00:00 06203abb72752d403edab644d0283f9a3c6497a9 [ Upstream commit 4720f1bf4ee4a784d9ece05420ba33c9222a3004 ] ehci_orion_drv_probe() did not account for possible errors of clk_prepare_enable() that in particular could cause invocation of clk_disable_unprepare() on clocks that were not prepared/enabled yet, e.g. in remove or on handling errors of usb_add_hcd() in probe. Though, there were several patches fixing different issues with clocks in this driver, they did not solve this problem. Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe() to avoid calls of clk_disable_unprepare() without previous successful invocation of clk_prepare_enable(). Found by Linux Driver Verification project (linuxtesting.org). Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks") Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com> Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4720f1bf4ee4a784d9ece05420ba33c9222a3004 ]

ehci_orion_drv_probe() did not account for possible errors of
clk_prepare_enable() that in particular could cause invocation of
clk_disable_unprepare() on clocks that were not prepared/enabled yet,
e.g. in remove or on handling errors of usb_add_hcd() in probe. Though,
there were several patches fixing different issues with clocks in this
driver, they did not solve this problem.

Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe()
to avoid calls of clk_disable_unprepare() without previous successful
invocation of clk_prepare_enable().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks")
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>