linux-stable.git/drivers/usb/host, branch v5.10.239 Linux kernel stable tree usb: host: tegra: Prevent host controller crash when OTG port is used 2025-06-04T12:36:55+00:00 Jim Lin jilin@nvidia.com 2025-04-22T11:40:01+00:00 a60bff6f408442a72a48f87da9f07bd59df9caba commit 732f35cf8bdfece582f6e4a9c659119036577308 upstream. When a USB device is connected to the OTG port, the tegra_xhci_id_work() routine transitions the PHY to host mode and calls xhci_hub_control() with the SetPortFeature command to enable port power. In certain cases, the XHCI controller may be in a low-power state when this operation occurs. If xhci_hub_control() is invoked while the controller is suspended, the PORTSC register may return 0xFFFFFFFF, indicating a read failure. This causes xhci_hc_died() to be triggered, leading to host controller shutdown. Example backtrace: [ 105.445736] Workqueue: events tegra_xhci_id_work [ 105.445747] dump_backtrace+0x0/0x1e8 [ 105.445759] xhci_hc_died.part.48+0x40/0x270 [ 105.445769] tegra_xhci_set_port_power+0xc0/0x240 [ 105.445774] tegra_xhci_id_work+0x130/0x240 To prevent this, ensure the controller is fully resumed before interacting with hardware registers by calling pm_runtime_get_sync() prior to the host mode transition and xhci_hub_control(). Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support") Cc: stable <stable@kernel.org> Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Wayne Chang <waynec@nvidia.com> Link: https://lore.kernel.org/r/20250422114001.126367-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 732f35cf8bdfece582f6e4a9c659119036577308 upstream.

When a USB device is connected to the OTG port, the tegra_xhci_id_work()
routine transitions the PHY to host mode and calls xhci_hub_control()
with the SetPortFeature command to enable port power.

In certain cases, the XHCI controller may be in a low-power state
when this operation occurs. If xhci_hub_control() is invoked while
the controller is suspended, the PORTSC register may return 0xFFFFFFFF,
indicating a read failure. This causes xhci_hc_died() to be triggered,
leading to host controller shutdown.

Example backtrace:
[  105.445736] Workqueue: events tegra_xhci_id_work
[  105.445747]  dump_backtrace+0x0/0x1e8
[  105.445759]  xhci_hc_died.part.48+0x40/0x270
[  105.445769]  tegra_xhci_set_port_power+0xc0/0x240
[  105.445774]  tegra_xhci_id_work+0x130/0x240

To prevent this, ensure the controller is fully resumed before
interacting with hardware registers by calling pm_runtime_get_sync()
prior to the host mode transition and xhci_hub_control().

Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support")
Cc: stable <stable@kernel.org>
Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20250422114001.126367-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: uhci-platform: Make the clock really optional 2025-06-04T12:36:54+00:00 Alexey Charkov alchark@gmail.com 2025-04-25T14:11:11+00:00 2aef06fa35dbd78f7e2d96e28ef7a113109f26fc commit a5c7973539b010874a37a0e846e62ac6f00553ba upstream. Device tree bindings state that the clock is optional for UHCI platform controllers, and some existing device trees don't provide those - such as those for VIA/WonderMedia devices. The driver however fails to probe now if no clock is provided, because devm_clk_get returns an error pointer in such case. Switch to devm_clk_get_optional instead, so that it could probe again on those platforms where no clocks are given. Cc: stable <stable@kernel.org> Fixes: 26c502701c52 ("usb: uhci: Add clk support to uhci-platform") Signed-off-by: Alexey Charkov <alchark@gmail.com> Link: https://lore.kernel.org/r/20250425-uhci-clock-optional-v1-1-a1d462592f29@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a5c7973539b010874a37a0e846e62ac6f00553ba upstream.

Device tree bindings state that the clock is optional for UHCI platform
controllers, and some existing device trees don't provide those - such
as those for VIA/WonderMedia devices.

The driver however fails to probe now if no clock is provided, because
devm_clk_get returns an error pointer in such case.

Switch to devm_clk_get_optional instead, so that it could probe again
on those platforms where no clocks are given.

Cc: stable <stable@kernel.org>
Fixes: 26c502701c52 ("usb: uhci: Add clk support to uhci-platform")
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250425-uhci-clock-optional-v1-1-a1d462592f29@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: max3421-hcd: Add missing spi_device_id table 2025-05-02T05:41:18+00:00 Alexander Stein alexander.stein@mailbox.org 2025-01-28T19:51:13+00:00 c0087066ae20f5b3be0b57e3dbe4b61e2900da49 [ Upstream commit 41d5e3806cf589f658f92c75195095df0b66f66a ] "maxim,max3421" DT compatible is missing its SPI device ID entry, not allowing module autoloading and leading to the following message: "SPI driver max3421-hcd has no spi_device_id for maxim,max3421" Fix this by adding the spi_device_id table. Signed-off-by: Alexander Stein <alexander.stein@mailbox.org> Link: https://lore.kernel.org/r/20250128195114.56321-1-alexander.stein@mailbox.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 41d5e3806cf589f658f92c75195095df0b66f66a ]

"maxim,max3421" DT compatible is missing its SPI device ID entry, not
allowing module autoloading and leading to the following message:
 "SPI driver max3421-hcd has no spi_device_id for maxim,max3421"

Fix this by adding the spi_device_id table.

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Link: https://lore.kernel.org/r/20250128195114.56321-1-alexander.stein@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
USB: OHCI: Add quirk for LS7A OHCI controller (rev 0x02) 2025-05-02T05:41:17+00:00 Huacai Chen chenhuacai@loongson.cn 2025-03-28T04:00:59+00:00 01ff6c2eb672d16263d41b6c4ab5f2d695bb2380 commit bcb60d438547355b8f9ad48645909139b64d3482 upstream. The OHCI controller (rev 0x02) under LS7A PCI host has a hardware flaw. MMIO register with offset 0x60/0x64 is treated as legacy PS2-compatible keyboard/mouse interface, which confuse the OHCI controller. Since OHCI only use a 4KB BAR resource indeed, the LS7A OHCI controller's 32KB BAR is wrapped around (the second 4KB BAR space is the same as the first 4KB internally). So we can add an 4KB offset (0x1000) to the OHCI registers (from the PCI BAR resource) as a quirk. Cc: stable <stable@kernel.org> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Mingcong Bai <baimingcong@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20250328040059.3672979-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bcb60d438547355b8f9ad48645909139b64d3482 upstream.

The OHCI controller (rev 0x02) under LS7A PCI host has a hardware flaw.
MMIO register with offset 0x60/0x64 is treated as legacy PS2-compatible
keyboard/mouse interface, which confuse the OHCI controller. Since OHCI
only use a 4KB BAR resource indeed, the LS7A OHCI controller's 32KB BAR
is wrapped around (the second 4KB BAR space is the same as the first 4KB
internally). So we can add an 4KB offset (0x1000) to the OHCI registers
(from the PCI BAR resource) as a quirk.

Cc: stable <stable@kernel.org>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Mingcong Bai <baimingcong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250328040059.3672979-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: Enable the TRB overfetch quirk on VIA VL805 2025-03-13T11:47:45+00:00 Michal Pecio michal.pecio@gmail.com 2025-02-25T09:59:27+00:00 55d300e7efaba95fc28047803788a192dffca750 commit c133ec0e5717868c9967fa3df92a55e537b1aead upstream. Raspberry Pi is a major user of those chips and they discovered a bug - when the end of a transfer ring segment is reached, up to four TRBs can be prefetched from the next page even if the segment ends with link TRB and on page boundary (the chip claims to support standard 4KB pages). It also appears that if the prefetched TRBs belong to a different ring whose doorbell is later rung, they may be used without refreshing from system RAM and the endpoint will stay idle if their cycle bit is stale. Other users complain about IOMMU faults on x86 systems, unsurprisingly. Deal with it by using existing quirk which allocates a dummy page after each transfer ring segment. This was seen to resolve both problems. RPi came up with a more efficient solution, shortening each segment by four TRBs, but it complicated the driver and they ditched it for this quirk. Also rename the quirk and add VL805 device ID macro. Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Link: https://github.com/raspberrypi/linux/issues/4685 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215906 CC: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250225095927.2512358-2-mathias.nyman@linux.intel.com [ Michal: merge conflict with white space and an unrelated quirk ] Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c133ec0e5717868c9967fa3df92a55e537b1aead upstream.

Raspberry Pi is a major user of those chips and they discovered a bug -
when the end of a transfer ring segment is reached, up to four TRBs can
be prefetched from the next page even if the segment ends with link TRB
and on page boundary (the chip claims to support standard 4KB pages).

It also appears that if the prefetched TRBs belong to a different ring
whose doorbell is later rung, they may be used without refreshing from
system RAM and the endpoint will stay idle if their cycle bit is stale.

Other users complain about IOMMU faults on x86 systems, unsurprisingly.

Deal with it by using existing quirk which allocates a dummy page after
each transfer ring segment. This was seen to resolve both problems. RPi
came up with a more efficient solution, shortening each segment by four
TRBs, but it complicated the driver and they ditched it for this quirk.

Also rename the quirk and add VL805 device ID macro.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://github.com/raspberrypi/linux/issues/4685
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215906
CC: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250225095927.2512358-2-mathias.nyman@linux.intel.com
[ Michal: merge conflict with white space and an unrelated quirk ]
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: pci: Fix indentation in the PCI device ID definitions 2025-03-13T11:47:42+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2024-11-06T10:14:48+00:00 2cb808076c6f7a8e09e43b248fc55e2d08b1df56 commit 0309ed83791c079f239c13e0c605210425cd1a61 upstream. Some of the definitions are missing the one TAB, add it to them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20241106101459.775897-23-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0309ed83791c079f239c13e0c605210425cd1a61 upstream.

Some of the definitions are missing the one TAB, add it to them.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241106101459.775897-23-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI 2025-03-13T11:47:17+00:00 Huacai Chen chenhuacai@loongson.cn 2025-02-02T12:49:35+00:00 328d3dfb7e30c20a363fd88d79a0ed086eb2109c commit e71f7f42e3c874ac3314b8f250e8416a706165af upstream. LS7A EHCI controller doesn't have extended capabilities, so the EECP (EHCI Extended Capabilities Pointer) field of HCCPARAMS register should be 0x0, but it reads as 0xa0 now. This is a hardware flaw and will be fixed in future, now just clear the EECP field to avoid error messages on boot: ...... [ 0.581675] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581699] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581716] pci 0000:00:04.1: EHCI: unrecognized capability ff [ 0.581851] pci 0000:00:04.1: EHCI: unrecognized capability ff ...... [ 0.581916] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.581951] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.582704] pci 0000:00:05.1: EHCI: unrecognized capability ff [ 0.582799] pci 0000:00:05.1: EHCI: unrecognized capability ff ...... Cc: stable <stable@kernel.org> Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20250202124935.480500-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e71f7f42e3c874ac3314b8f250e8416a706165af upstream.

LS7A EHCI controller doesn't have extended capabilities, so the EECP
(EHCI Extended Capabilities Pointer) field of HCCPARAMS register should
be 0x0, but it reads as 0xa0 now. This is a hardware flaw and will be
fixed in future, now just clear the EECP field to avoid error messages
on boot:

......
[    0.581675] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    0.581699] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    0.581716] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    0.581851] pci 0000:00:04.1: EHCI: unrecognized capability ff
......
[    0.581916] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    0.581951] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    0.582704] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    0.582799] pci 0000:00:05.1: EHCI: unrecognized capability ff
......

Cc: stable <stable@kernel.org>
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250202124935.480500-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: Fix NULL pointer dereference on certain command aborts 2025-03-13T11:47:03+00:00 Michal Pecio michal.pecio@gmail.com 2024-12-27T12:01:40+00:00 b44253956407046e5907d4d72c8fa5b93ae94485 [ Upstream commit 1e0a19912adb68a4b2b74fd77001c96cd83eb073 ] If a command is queued to the final usable TRB of a ring segment, the enqueue pointer is advanced to the subsequent link TRB and no further. If the command is later aborted, when the abort completion is handled the dequeue pointer is advanced to the first TRB of the next segment. If no further commands are queued, xhci_handle_stopped_cmd_ring() sees the ring pointers unequal and assumes that there is a pending command, so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL. Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell ring likely is unnecessary too, but it's harmless. Leave it alone. This is probably Bug 219532, but no confirmation has been received. The issue has been independently reproduced and confirmed fixed using a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever. Everything continued working normally after several prevented crashes. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219532 Fixes: c311e391a7ef ("xhci: rework command timeout and cancellation,") CC: stable@vger.kernel.org Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20241227120142.1035206-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1e0a19912adb68a4b2b74fd77001c96cd83eb073 ]

If a command is queued to the final usable TRB of a ring segment, the
enqueue pointer is advanced to the subsequent link TRB and no further.
If the command is later aborted, when the abort completion is handled
the dequeue pointer is advanced to the first TRB of the next segment.

If no further commands are queued, xhci_handle_stopped_cmd_ring() sees
the ring pointers unequal and assumes that there is a pending command,
so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL.

Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell
ring likely is unnecessary too, but it's harmless. Leave it alone.

This is probably Bug 219532, but no confirmation has been received.

The issue has been independently reproduced and confirmed fixed using
a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever.
Everything continued working normally after several prevented crashes.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219532
Fixes: c311e391a7ef ("xhci: rework command timeout and cancellation,")
CC: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241227120142.1035206-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: xhci: Add timeout argument in address_device USB HCD callback 2025-03-13T11:47:03+00:00 Hardik Gajjar hgajjar@de.adit-jv.com 2023-10-27T15:20:28+00:00 5fed21083b4517a5792eec7d3b63a41222860806 [ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ] - The HCD address_device callback now accepts a user-defined timeout value in milliseconds, providing better control over command execution times. - The default timeout value for the address_device command has been set to 5000 ms, aligning with the USB 3.2 specification. However, this timeout can be adjusted as needed. - The xhci_setup_device function has been updated to accept the timeout value, allowing it to specify the maximum wait time for the command operation to complete. - The hub driver has also been updated to accommodate the newly added timeout parameter during the SET_ADDRESS request. Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com> Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 1e0a19912adb ("usb: xhci: Fix NULL pointer dereference on certain command aborts") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ]

- The HCD address_device callback now accepts a user-defined timeout value
  in milliseconds, providing better control over command execution times.
- The default timeout value for the address_device command has been set
  to 5000 ms, aligning with the USB 3.2 specification. However, this
  timeout can be adjusted as needed.
- The xhci_setup_device function has been updated to accept the timeout
  value, allowing it to specify the maximum wait time for the command
  operation to complete.
- The hub driver has also been updated to accommodate the newly added
  timeout parameter during the SET_ADDRESS request.

Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1e0a19912adb ("usb: xhci: Fix NULL pointer dereference on certain command aborts")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Partial revert of xhci: use pm_ptr() instead #ifdef for CONFIG_PM conditionals 2025-02-01T17:22:34+00:00 Ron Economos re@w6rz.net 2025-01-18T12:24:09+00:00 c762b76981fc12b4f116e75b0d11de8871512653 commit 448fe5a1a4b538b235a43e57863c3a078bd13b01 upstream. commit 9734fd7a2777 ("xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionals") did not quite work properly in the 5.15.y branch where it was applied to fix a build error when CONFIG_PM was set as it left the following build errors still present: ERROR: modpost: "xhci_suspend" [drivers/usb/host/xhci-pci.ko] undefined! ERROR: modpost: "xhci_resume" [drivers/usb/host/xhci-pci.ko] undefined! Fix this up by properly placing the #ifdef CONFIG_PM in the xhci-pci.c and hcd.h files to handle this correctly. Link: https://lore.kernel.org/r/133dbfa0-4a37-4ae0-bb95-1a35f668ec11@w6rz.net Signed-off-by: Ron Economos <re@w6rz.net> Link: https://lore.kernel.org/r/d0919169-ee06-4bdd-b2e3-2f776db90971@roeck-us.net Reported-by: Guenter Roeck <linux@roeck-us.net> [ Trimmed the partial revert down to an even smaller bit to only be what is required to fix the build error - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 448fe5a1a4b538b235a43e57863c3a078bd13b01 upstream.

commit 9734fd7a2777 ("xhci: use pm_ptr() instead of #ifdef for CONFIG_PM
conditionals") did not quite work properly in the 5.15.y branch where it was
applied to fix a build error when CONFIG_PM was set as it left the following
build errors still present:

	ERROR: modpost: "xhci_suspend" [drivers/usb/host/xhci-pci.ko] undefined!
	ERROR: modpost: "xhci_resume" [drivers/usb/host/xhci-pci.ko] undefined!

Fix this up by properly placing the #ifdef CONFIG_PM in the xhci-pci.c and
hcd.h files to handle this correctly.

Link: https://lore.kernel.org/r/133dbfa0-4a37-4ae0-bb95-1a35f668ec11@w6rz.net
Signed-off-by: Ron Economos <re@w6rz.net>
Link: https://lore.kernel.org/r/d0919169-ee06-4bdd-b2e3-2f776db90971@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
[ Trimmed the partial revert down to an even smaller bit to only be what
  is required to fix the build error - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>