linux-stable.git/drivers/usb/host, branch v4.4.201 Linux kernel stable tree xhci: Increase STS_SAVE timeout in xhci_suspend() 2019-10-17T20:40:59+00:00 Kai-Heng Feng kai.heng.feng@canonical.com 2019-10-04T11:59:32+00:00 557b03eb449184ce0e182c585e8838441bde2049 commit ac343366846a445bb81f0a0e8f16abb8bd5d5d88 upstream. After commit f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()"), ASMedia xHCI may fail to suspend. Although the algorithms are essentially the same, the old max timeout is (usec + usec * time of doing readl()), and the new max timeout is just usec, which is much less than the old one. Increase the timeout to make ASMedia xHCI able to suspend again. BugLink: https://bugs.launchpad.net/bugs/1844021 Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-8-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ac343366846a445bb81f0a0e8f16abb8bd5d5d88 upstream.

After commit f7fac17ca925 ("xhci: Convert xhci_handshake() to use
readl_poll_timeout_atomic()"), ASMedia xHCI may fail to suspend.

Although the algorithms are essentially the same, the old max timeout is
(usec + usec * time of doing readl()), and the new max timeout is just
usec, which is much less than the old one.

Increase the timeout to make ASMedia xHCI able to suspend again.

BugLink: https://bugs.launchpad.net/bugs/1844021
Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-8-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: wait for CNR controller not ready bit in xhci resume 2019-10-17T20:40:59+00:00 Rick Tseng rtseng@nvidia.com 2019-10-04T11:59:30+00:00 384f906e724c7ced8c53143c4a5300b3b4c249d9 commit a70bcbc322837eda1ab5994d12db941dc9733a7d upstream. NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold. Thus we need to wait for CNR bit to clear in xhci resume, just as in xhci init. [Minor changes to comment and commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Rick Tseng <rtseng@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-6-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a70bcbc322837eda1ab5994d12db941dc9733a7d upstream.

NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold.
Thus we need to wait for CNR bit to clear in xhci resume, just as in
xhci init.

[Minor changes to comment and commit message -Mathias]
Cc: <stable@vger.kernel.org>
Signed-off-by: Rick Tseng <rtseng@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-6-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Check all endpoints for LPM timeout 2019-10-17T20:40:59+00:00 Jan Schmidt jan@centricular.com 2019-10-04T11:59:28+00:00 0cd0bbdad9a4dff6d91d341cfe267afe4dae2f9c commit d500c63f80f2ea08ee300e57da5f2af1c13875f5 upstream. If an endpoint is encountered that returns USB3_LPM_DEVICE_INITIATED, keep checking further endpoints, as there might be periodic endpoints later that return USB3_LPM_DISABLED due to shorter service intervals. Without this, the code can set too high a maximum-exit-latency and prevent the use of multiple USB3 cameras that should be able to work. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Schmidt <jan@centricular.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-4-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d500c63f80f2ea08ee300e57da5f2af1c13875f5 upstream.

If an endpoint is encountered that returns USB3_LPM_DEVICE_INITIATED, keep
checking further endpoints, as there might be periodic endpoints later
that return USB3_LPM_DISABLED due to shorter service intervals.

Without this, the code can set too high a maximum-exit-latency and
prevent the use of multiple USB3 cameras that should be able to work.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Schmidt <jan@centricular.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-4-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Prevent device initiated U1/U2 link pm if exit latency is too long 2019-10-17T20:40:59+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2019-10-04T11:59:27+00:00 8af575b89e497a6330b5f96ee878f7964ddac2da commit cd9d9491e835a845c1a98b8471f88d26285e0bb9 upstream. If host/hub initiated link pm is prevented by a driver flag we still must ensure that periodic endpoints have longer service intervals than link pm exit latency before allowing device initiated link pm. Fix this by continue walking and checking endpoint service interval if xhci_get_timeout_no_hub_lpm() returns anything else than USB3_LPM_DISABLED While at it fix the split line error message Tested-by: Jan Schmidt <jan@centricular.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-3-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cd9d9491e835a845c1a98b8471f88d26285e0bb9 upstream.

If host/hub initiated link pm is prevented by a driver flag we still must
ensure that periodic endpoints have longer service intervals than link pm
exit latency before allowing device initiated link pm.

Fix this by continue walking and checking endpoint service interval if
xhci_get_timeout_no_hub_lpm() returns anything else than USB3_LPM_DISABLED

While at it fix the split line error message

Tested-by: Jan Schmidt <jan@centricular.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-3-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: ohci: fix a race condition between shutdown and irq 2019-09-06T08:18:16+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2019-08-27T03:51:50+00:00 eb1ff5020b3e55f88be1f506042b003d9478cbfd commit a349b95d7ca0cea71be4a7dac29830703de7eb62 upstream. This patch fixes an issue that the following error is possible to happen when ohci hardware causes an interruption and the system is shutting down at the same time. [ 34.851754] usb 2-1: USB disconnect, device number 2 [ 35.166658] irq 156: nobody cared (try booting with the "irqpoll" option) [ 35.173445] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.3.0-rc5 #85 [ 35.179964] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 35.187886] Workqueue: usb_hub_wq hub_event [ 35.192063] Call trace: [ 35.194509] dump_backtrace+0x0/0x150 [ 35.198165] show_stack+0x14/0x20 [ 35.201475] dump_stack+0xa0/0xc4 [ 35.204785] __report_bad_irq+0x34/0xe8 [ 35.208614] note_interrupt+0x2cc/0x318 [ 35.212446] handle_irq_event_percpu+0x5c/0x88 [ 35.216883] handle_irq_event+0x48/0x78 [ 35.220712] handle_fasteoi_irq+0xb4/0x188 [ 35.224802] generic_handle_irq+0x24/0x38 [ 35.228804] __handle_domain_irq+0x5c/0xb0 [ 35.232893] gic_handle_irq+0x58/0xa8 [ 35.236548] el1_irq+0xb8/0x180 [ 35.239681] __do_softirq+0x94/0x23c [ 35.243253] irq_exit+0xd0/0xd8 [ 35.246387] __handle_domain_irq+0x60/0xb0 [ 35.250475] gic_handle_irq+0x58/0xa8 [ 35.254130] el1_irq+0xb8/0x180 [ 35.257268] kernfs_find_ns+0x5c/0x120 [ 35.261010] kernfs_find_and_get_ns+0x3c/0x60 [ 35.265361] sysfs_unmerge_group+0x20/0x68 [ 35.269454] dpm_sysfs_remove+0x2c/0x68 [ 35.273284] device_del+0x80/0x370 [ 35.276683] hid_destroy_device+0x28/0x60 [ 35.280686] usbhid_disconnect+0x4c/0x80 [ 35.284602] usb_unbind_interface+0x6c/0x268 [ 35.288867] device_release_driver_internal+0xe4/0x1b0 [ 35.293998] device_release_driver+0x14/0x20 [ 35.298261] bus_remove_device+0x110/0x128 [ 35.302350] device_del+0x148/0x370 [ 35.305832] usb_disable_device+0x8c/0x1d0 [ 35.309921] usb_disconnect+0xc8/0x2d0 [ 35.313663] hub_event+0x6e0/0x1128 [ 35.317146] process_one_work+0x1e0/0x320 [ 35.321148] worker_thread+0x40/0x450 [ 35.324805] kthread+0x124/0x128 [ 35.328027] ret_from_fork+0x10/0x18 [ 35.331594] handlers: [ 35.333862] [<0000000079300c1d>] usb_hcd_irq [ 35.338126] [<0000000079300c1d>] usb_hcd_irq [ 35.342389] Disabling IRQ #156 ohci_shutdown() disables all the interrupt and rh_state is set to OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF is possible to be set by start_ed_unlink() which is called: ohci_irq() -> process_done_list() -> takeback_td() -> start_ed_unlink() So, ohci_irq() has the following condition, the issue happens by &ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and ohci->rh_state = OHCI_RH_HALTED: /* interrupt for some other device? */ if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED)) return IRQ_NOTMINE; To fix the issue, ohci_shutdown() holds the spin lock while disabling the interruption and changing the rh_state flag to prevent reenable the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also calls the ohci_shutdown() and it already held the spin lock, so that the patch makes a new function as _ohci_shutdown(). This patch is inspired by a Renesas R-Car Gen3 BSP patch from Tho Vu. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1566877910-6020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a349b95d7ca0cea71be4a7dac29830703de7eb62 upstream.

This patch fixes an issue that the following error is
possible to happen when ohci hardware causes an interruption
and the system is shutting down at the same time.

[   34.851754] usb 2-1: USB disconnect, device number 2
[   35.166658] irq 156: nobody cared (try booting with the "irqpoll" option)
[   35.173445] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.3.0-rc5 #85
[   35.179964] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[   35.187886] Workqueue: usb_hub_wq hub_event
[   35.192063] Call trace:
[   35.194509]  dump_backtrace+0x0/0x150
[   35.198165]  show_stack+0x14/0x20
[   35.201475]  dump_stack+0xa0/0xc4
[   35.204785]  __report_bad_irq+0x34/0xe8
[   35.208614]  note_interrupt+0x2cc/0x318
[   35.212446]  handle_irq_event_percpu+0x5c/0x88
[   35.216883]  handle_irq_event+0x48/0x78
[   35.220712]  handle_fasteoi_irq+0xb4/0x188
[   35.224802]  generic_handle_irq+0x24/0x38
[   35.228804]  __handle_domain_irq+0x5c/0xb0
[   35.232893]  gic_handle_irq+0x58/0xa8
[   35.236548]  el1_irq+0xb8/0x180
[   35.239681]  __do_softirq+0x94/0x23c
[   35.243253]  irq_exit+0xd0/0xd8
[   35.246387]  __handle_domain_irq+0x60/0xb0
[   35.250475]  gic_handle_irq+0x58/0xa8
[   35.254130]  el1_irq+0xb8/0x180
[   35.257268]  kernfs_find_ns+0x5c/0x120
[   35.261010]  kernfs_find_and_get_ns+0x3c/0x60
[   35.265361]  sysfs_unmerge_group+0x20/0x68
[   35.269454]  dpm_sysfs_remove+0x2c/0x68
[   35.273284]  device_del+0x80/0x370
[   35.276683]  hid_destroy_device+0x28/0x60
[   35.280686]  usbhid_disconnect+0x4c/0x80
[   35.284602]  usb_unbind_interface+0x6c/0x268
[   35.288867]  device_release_driver_internal+0xe4/0x1b0
[   35.293998]  device_release_driver+0x14/0x20
[   35.298261]  bus_remove_device+0x110/0x128
[   35.302350]  device_del+0x148/0x370
[   35.305832]  usb_disable_device+0x8c/0x1d0
[   35.309921]  usb_disconnect+0xc8/0x2d0
[   35.313663]  hub_event+0x6e0/0x1128
[   35.317146]  process_one_work+0x1e0/0x320
[   35.321148]  worker_thread+0x40/0x450
[   35.324805]  kthread+0x124/0x128
[   35.328027]  ret_from_fork+0x10/0x18
[   35.331594] handlers:
[   35.333862] [<0000000079300c1d>] usb_hcd_irq
[   35.338126] [<0000000079300c1d>] usb_hcd_irq
[   35.342389] Disabling IRQ #156

ohci_shutdown() disables all the interrupt and rh_state is set to
OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable
OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF
is possible to be set by start_ed_unlink() which is called:
 ohci_irq()
  -> process_done_list()
   -> takeback_td()
    -> start_ed_unlink()

So, ohci_irq() has the following condition, the issue happens by
&ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and
ohci->rh_state = OHCI_RH_HALTED:

	/* interrupt for some other device? */
	if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED))
		return IRQ_NOTMINE;

To fix the issue, ohci_shutdown() holds the spin lock while disabling
the interruption and changing the rh_state flag to prevent reenable
the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also
calls the ohci_shutdown() and it already held the spin lock, so that
the patch makes a new function as _ohci_shutdown().

This patch is inspired by a Renesas R-Car Gen3 BSP patch
from Tho Vu.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1566877910-6020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: fotg2: restart hcd after port reset 2019-09-06T08:18:14+00:00 Hans Ulli Kroll ulli.kroll@googlemail.com 2019-08-10T15:04:58+00:00 6cf3f1cd77bafef468e076ad5ca963dc49d30000 [ Upstream commit 777758888ffe59ef754cc39ab2f275dc277732f4 ] On the Gemini SoC the FOTG2 stalls after port reset so restart the HCD after each port reset. Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 777758888ffe59ef754cc39ab2f275dc277732f4 ]

On the Gemini SoC the FOTG2 stalls after port reset
so restart the HCD after each port reset.

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: pci-quirks: Correct AMD PLL quirk detection 2019-08-04T07:35:00+00:00 Ryan Kennedy ryan5544@gmail.com 2019-07-04T15:35:28+00:00 97b02599962b5e8216623ffcc99901446c15f5ea commit f3dccdaade4118070a3a47bef6b18321431f9ac6 upstream. The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f3dccdaade4118070a3a47bef6b18321431f9ac6 upstream.

The AMD PLL USB quirk is incorrectly enabled on newer Ryzen
chipsets. The logic in usb_amd_find_chipset_info currently checks
for unaffected chipsets rather than affected ones. This broke
once a new chipset was added in e788787ef. It makes more sense
to reverse the logic so it won't need to be updated as new
chipsets are added. Note that the core of the workaround in
usb_amd_quirk_pll does correctly check the chipset.

Signed-off-by: Ryan Kennedy <ryan5544@gmail.com>
Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: wusbcore: fix unbalanced get/put cluster_id 2019-08-04T07:35:00+00:00 Phong Tran tranmanphong@gmail.com 2019-07-24T02:06:01+00:00 77f962794b341aa3421fe1438a66d87b97caccf1 commit f90bf1ece48a736097ea224430578fe586a9544c upstream. syzboot reported that https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef There is not consitency parameter in cluste_id_get/put calling. In case of getting the id with result is failure, the wusbhc->cluster_id will not be updated and this can not be used for wusb_cluster_id_put(). Tested report https://groups.google.com/d/msg/syzkaller-bugs/0znZopp3-9k/oxOrhLkLEgAJ Reproduce and gdb got the details: 139 addr = wusb_cluster_id_get(); (gdb) n 140 if (addr == 0) (gdb) print addr $1 = 254 '\376' (gdb) n 142 result = __hwahc_set_cluster_id(hwahc, addr); (gdb) print result $2 = -71 (gdb) break wusb_cluster_id_put Breakpoint 3 at 0xffffffff836e3f20: file drivers/usb/wusbcore/wusbhc.c, line 384. (gdb) s Thread 2 hit Breakpoint 3, wusb_cluster_id_put (id=0 '\000') at drivers/usb/wusbcore/wusbhc.c:384 384 id = 0xff - id; (gdb) n 385 BUG_ON(id >= CLUSTER_IDS); (gdb) print id $3 = 255 '\377' Reported-by: syzbot+fd2bd7df88c606eea4ef@syzkaller.appspotmail.com Signed-off-by: Phong Tran <tranmanphong@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190724020601.15257-1-tranmanphong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f90bf1ece48a736097ea224430578fe586a9544c upstream.

syzboot reported that
https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef

There is not consitency parameter in cluste_id_get/put calling.
In case of getting the id with result is failure, the wusbhc->cluster_id
will not be updated and this can not be used for wusb_cluster_id_put().

Tested report
https://groups.google.com/d/msg/syzkaller-bugs/0znZopp3-9k/oxOrhLkLEgAJ

Reproduce and gdb got the details:

139		addr = wusb_cluster_id_get();
(gdb) n
140		if (addr == 0)
(gdb) print addr
$1 = 254 '\376'
(gdb) n
142		result = __hwahc_set_cluster_id(hwahc, addr);
(gdb) print result
$2 = -71
(gdb) break wusb_cluster_id_put
Breakpoint 3 at 0xffffffff836e3f20: file drivers/usb/wusbcore/wusbhc.c, line 384.
(gdb) s
Thread 2 hit Breakpoint 3, wusb_cluster_id_put (id=0 '\000') at drivers/usb/wusbcore/wusbhc.c:384
384		id = 0xff - id;
(gdb) n
385		BUG_ON(id >= CLUSTER_IDS);
(gdb) print id
$3 = 255 '\377'

Reported-by: syzbot+fd2bd7df88c606eea4ef@syzkaller.appspotmail.com
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190724020601.15257-1-tranmanphong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: avoid null pointer deref when bos field is NULL 2019-06-11T10:24:08+00:00 Carsten Schmid carsten_schmid@mentor.com 2019-05-22T11:33:59+00:00 f5e1ec93b2084fdecf622a45c98439c3f6364a47 commit 7aa1bb2ffd84d6b9b5f546b079bb15cd0ab6e76e upstream. With defective USB sticks we see the following error happen: usb 1-3: new high-speed USB device number 6 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: device descriptor read/64, error -71 usb 1-3: new high-speed USB device number 7 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: unable to get BOS descriptor set usb 1-3: New USB device found, idVendor=0781, idProduct=5581 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 ... BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 This comes from the following place: [ 1660.215380] IP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.222092] PGD 0 P4D 0 [ 1660.224918] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 1660.425520] CPU: 1 PID: 38 Comm: kworker/1:1 Tainted: P U W O 4.14.67-apl #1 [ 1660.434277] Workqueue: usb_hub_wq hub_event [usbcore] [ 1660.439918] task: ffffa295b6ae4c80 task.stack: ffffad4580150000 [ 1660.446532] RIP: 0010:xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.453821] RSP: 0018:ffffad4580153c70 EFLAGS: 00010046 [ 1660.459655] RAX: 0000000000000000 RBX: ffffa295b4d7c000 RCX: 0000000000000002 [ 1660.467625] RDX: 0000000000000002 RSI: ffffffff984a55b2 RDI: ffffffff984a55b2 [ 1660.475586] RBP: ffffad4580153cc8 R08: 0000000000d6520a R09: 0000000000000001 [ 1660.483556] R10: ffffad4580a004a0 R11: 0000000000000286 R12: ffffa295b4d7c000 [ 1660.491525] R13: 0000000000010648 R14: ffffa295a84e1800 R15: 0000000000000000 [ 1660.499494] FS: 0000000000000000(0000) GS:ffffa295bfc80000(0000) knlGS:0000000000000000 [ 1660.508530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1660.514947] CR2: 0000000000000008 CR3: 000000025a114000 CR4: 00000000003406a0 [ 1660.522917] Call Trace: [ 1660.525657] usb_set_usb2_hardware_lpm+0x3d/0x70 [usbcore] [ 1660.531792] usb_disable_device+0x242/0x260 [usbcore] [ 1660.537439] usb_disconnect+0xc1/0x2b0 [usbcore] [ 1660.542600] hub_event+0x596/0x18f0 [usbcore] [ 1660.547467] ? trace_preempt_on+0xdf/0x100 [ 1660.552040] ? process_one_work+0x1c1/0x410 [ 1660.556708] process_one_work+0x1d2/0x410 [ 1660.561184] ? preempt_count_add.part.3+0x21/0x60 [ 1660.566436] worker_thread+0x2d/0x3f0 [ 1660.570522] kthread+0x122/0x140 [ 1660.574123] ? process_one_work+0x410/0x410 [ 1660.578792] ? kthread_create_on_node+0x60/0x60 [ 1660.583849] ret_from_fork+0x3a/0x50 [ 1660.587839] Code: 00 49 89 c3 49 8b 84 24 50 16 00 00 8d 4a ff 48 8d 04 c8 48 89 ca 4c 8b 10 45 8b 6a 04 48 8b 00 48 89 45 c0 49 8b 86 80 03 00 00 <48> 8b 40 08 8b 40 03 0f 1f 44 00 00 45 85 ff 0f 84 81 01 00 00 [ 1660.608980] RIP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] RSP: ffffad4580153c70 [ 1660.617921] CR2: 0000000000000008 Tracking this down shows that udev->bos is NULL in the following code: (xhci.c, in xhci_set_usb2_hardware_lpm) field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); <<<<<<< here xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); if (enable) { /* Host supports BESL timeout instead of HIRD */ if (udev->usb2_hw_lpm_besl_capable) { /* if device doesn't have a preferred BESL value use a * default one which works with mixed HIRD and BESL * systems. See XHCI_DEFAULT_BESL definition in xhci.h */ if ((field & USB_BESL_SUPPORT) && (field & USB_BESL_BASELINE_VALID)) hird = USB_GET_BESL_BASELINE(field); else hird = udev->l1_params.besl; The failing case is when disabling LPM. So it is sufficient to avoid access to udev->bos by moving the instruction into the "enable" clause. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Carsten Schmid <carsten_schmid@mentor.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7aa1bb2ffd84d6b9b5f546b079bb15cd0ab6e76e upstream.

With defective USB sticks we see the following error happen:
usb 1-3: new high-speed USB device number 6 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
usb 1-3: device descriptor read/64, error -71
usb 1-3: new high-speed USB device number 7 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
usb 1-3: unable to get BOS descriptor set
usb 1-3: New USB device found, idVendor=0781, idProduct=5581
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
...
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008

This comes from the following place:
[ 1660.215380] IP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd]
[ 1660.222092] PGD 0 P4D 0
[ 1660.224918] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 1660.425520] CPU: 1 PID: 38 Comm: kworker/1:1 Tainted: P     U  W  O    4.14.67-apl #1
[ 1660.434277] Workqueue: usb_hub_wq hub_event [usbcore]
[ 1660.439918] task: ffffa295b6ae4c80 task.stack: ffffad4580150000
[ 1660.446532] RIP: 0010:xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd]
[ 1660.453821] RSP: 0018:ffffad4580153c70 EFLAGS: 00010046
[ 1660.459655] RAX: 0000000000000000 RBX: ffffa295b4d7c000 RCX: 0000000000000002
[ 1660.467625] RDX: 0000000000000002 RSI: ffffffff984a55b2 RDI: ffffffff984a55b2
[ 1660.475586] RBP: ffffad4580153cc8 R08: 0000000000d6520a R09: 0000000000000001
[ 1660.483556] R10: ffffad4580a004a0 R11: 0000000000000286 R12: ffffa295b4d7c000
[ 1660.491525] R13: 0000000000010648 R14: ffffa295a84e1800 R15: 0000000000000000
[ 1660.499494] FS:  0000000000000000(0000) GS:ffffa295bfc80000(0000) knlGS:0000000000000000
[ 1660.508530] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1660.514947] CR2: 0000000000000008 CR3: 000000025a114000 CR4: 00000000003406a0
[ 1660.522917] Call Trace:
[ 1660.525657]  usb_set_usb2_hardware_lpm+0x3d/0x70 [usbcore]
[ 1660.531792]  usb_disable_device+0x242/0x260 [usbcore]
[ 1660.537439]  usb_disconnect+0xc1/0x2b0 [usbcore]
[ 1660.542600]  hub_event+0x596/0x18f0 [usbcore]
[ 1660.547467]  ? trace_preempt_on+0xdf/0x100
[ 1660.552040]  ? process_one_work+0x1c1/0x410
[ 1660.556708]  process_one_work+0x1d2/0x410
[ 1660.561184]  ? preempt_count_add.part.3+0x21/0x60
[ 1660.566436]  worker_thread+0x2d/0x3f0
[ 1660.570522]  kthread+0x122/0x140
[ 1660.574123]  ? process_one_work+0x410/0x410
[ 1660.578792]  ? kthread_create_on_node+0x60/0x60
[ 1660.583849]  ret_from_fork+0x3a/0x50
[ 1660.587839] Code: 00 49 89 c3 49 8b 84 24 50 16 00 00 8d 4a ff 48 8d 04 c8 48 89 ca 4c 8b 10 45 8b 6a 04 48 8b 00 48 89 45 c0 49 8b 86 80 03 00 00 <48> 8b 40 08 8b 40 03 0f 1f 44 00 00 45 85 ff 0f 84 81 01 00 00
[ 1660.608980] RIP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] RSP: ffffad4580153c70
[ 1660.617921] CR2: 0000000000000008

Tracking this down shows that udev->bos is NULL in the following code:
(xhci.c, in xhci_set_usb2_hardware_lpm)
	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);  <<<<<<< here

	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
			enable ? "enable" : "disable", port_num + 1);

	if (enable) {
		/* Host supports BESL timeout instead of HIRD */
		if (udev->usb2_hw_lpm_besl_capable) {
			/* if device doesn't have a preferred BESL value use a
			 * default one which works with mixed HIRD and BESL
			 * systems. See XHCI_DEFAULT_BESL definition in xhci.h
			 */
			if ((field & USB_BESL_SUPPORT) &&
			    (field & USB_BESL_BASELINE_VALID))
				hird = USB_GET_BESL_BASELINE(field);
			else
				hird = udev->l1_params.besl;

The failing case is when disabling LPM. So it is sufficient to avoid
access to udev->bos by moving the instruction into the "enable" clause.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Carsten Schmid <carsten_schmid@mentor.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic() 2019-06-11T10:24:08+00:00 Andrey Smirnov andrew.smirnov@gmail.com 2019-05-22T11:34:01+00:00 017e6726a4fb08ee04c6653d759009f9939b4297 commit f7fac17ca925faa03fc5eb854c081a24075f8bad upstream. Xhci_handshake() implements the algorithm already captured by readl_poll_timeout_atomic(). Convert the former to use the latter to avoid repetition. Turned out this patch also fixes a bug on the AMD Stoneyridge platform where usleep(1) sometimes takes over 10ms. This means a 5 second timeout can easily take over 15 seconds which will trigger the watchdog and reboot the system. [Add info about patch fixing a bug to commit message -Mathias] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Raul E Rangel <rrangel@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f7fac17ca925faa03fc5eb854c081a24075f8bad upstream.

Xhci_handshake() implements the algorithm already captured by
readl_poll_timeout_atomic(). Convert the former to use the latter to
avoid repetition.

Turned out this patch also fixes a bug on the AMD Stoneyridge platform
where usleep(1) sometimes takes over 10ms.
This means a 5 second timeout can easily take over 15 seconds which will
trigger the watchdog and reboot the system.

[Add info about patch fixing a bug to commit message -Mathias]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>