linux-stable.git/drivers/usb/host, branch v4.4.166 Linux kernel stable tree usb: xhci: fix uninitialized completion when USB3 port got wrong status 2018-12-01T08:46:41+00:00 Aaron Ma aaron.ma@canonical.com 2018-11-09T15:21:20+00:00 ae52c0d8586fc47a927c1e20a2abfb5afacd5553 commit 958c0bd86075d4ef1c936998deefe1947e539240 upstream. Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3, after clear port reset it works fine. Since this device is registered on USB3 roothub at boot, when port status reports not superspeed, xhci_get_port_status will call an uninitialized completion in bus_state[0]. Kernel will hang because of NULL pointer. Restrict the USB2 resume status check in USB2 roothub to fix hang issue. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 958c0bd86075d4ef1c936998deefe1947e539240 upstream.

Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on
Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3,
after clear port reset it works fine.

Since this device is registered on USB3 roothub at boot,
when port status reports not superspeed, xhci_get_port_status will call
an uninitialized completion in bus_state[0].
Kernel will hang because of NULL pointer.

Restrict the USB2 resume status check in USB2 roothub to fix hang issue.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: Prevent bus suspend if a port connect change or polling state is detected 2018-12-01T08:46:34+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2018-11-15T09:38:41+00:00 cf0f464facd6a3150f8bbaf3ce84d24e1b2b68ff commit 2f31a67f01a8beb22cae754c53522cb61a005750 upstream. USB3 roothub might autosuspend before a plugged USB3 device is detected, causing USB3 device enumeration failure. USB3 devices don't show up as connected and enabled until USB3 link trainig completes. On a fast booting platform with a slow USB3 link training the link might reach the connected enabled state just as the bus is suspending. If this device is discovered first time by the xhci_bus_suspend() routine it will be put to U3 suspended state like the other ports which failed to suspend earlier. The hub thread will notice the connect change and resume the bus, moving the port back to U0 This U0 -> U3 -> U0 transition right after being connected seems to be too much for some devices, causing them to first go to SS.Inactive state, and finally end up stuck in a polling state with reset asserted Fix this by failing the bus suspend if a port has a connect change or is in a polling state in xhci_bus_suspend(). Don't do any port changes until all ports are checked, buffer all port changes and only write them in the end if suspend can proceed Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2f31a67f01a8beb22cae754c53522cb61a005750 upstream.

USB3 roothub might autosuspend before a plugged USB3 device is detected,
causing USB3 device enumeration failure.

USB3 devices don't show up as connected and enabled until USB3 link trainig
completes. On a fast booting platform with a slow USB3 link training the
link might reach the connected enabled state just as the bus is suspending.

If this device is discovered first time by the xhci_bus_suspend() routine
it will be put to U3 suspended state like the other ports which failed to
suspend earlier.

The hub thread will notice the connect change and resume the bus,
moving the port back to U0

This U0 -> U3 -> U0 transition right after being connected seems to be
too much for some devices, causing them to first go to SS.Inactive state,
and finally end up stuck in a polling state with reset asserted

Fix this by failing the bus suspend if a port has a connect change or is
in a polling state in xhci_bus_suspend().

Don't do any port changes until all ports are checked, buffer all port
changes and only write them in the end if suspend can proceed

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: fix timeout for transition from RExit to U0 2018-12-01T08:46:33+00:00 Aaron Ma aaron.ma@canonical.com 2018-11-09T15:21:21+00:00 cb4cb3eab5388df1b9604baed7ad97c8509d97d5 commit a5baeaeabcca3244782a9b6382ebab6f8a58f583 upstream. This definition is used by msecs_to_jiffies in milliseconds. According to the comments, max rexit timeout should be 20ms. Align with the comments to properly calculate the delay. Verified on Sunrise Point-LP and Cannon Lake. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a5baeaeabcca3244782a9b6382ebab6f8a58f583 upstream.

This definition is used by msecs_to_jiffies in milliseconds.
According to the comments, max rexit timeout should be 20ms.
Align with the comments to properly calculate the delay.

Verified on Sunrise Point-LP and Cannon Lake.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix USB3 NULL pointer dereference at logical disconnect. 2018-11-27T15:08:02+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2018-05-14T08:57:23+00:00 d57a6bb22085ed9bebe300497da8cae1dcb4f266 commit 2278446e2b7cd33ad894b32e7eb63afc7db6c86e upstream. Hub driver will try to disable a USB3 device twice at logical disconnect, racing with xhci_free_dev() callback from the first port disable. This can be triggered with "udisksctl power-off --block-device <disk>" or by writing "1" to the "remove" sysfs file for a USB3 device in 4.17-rc4. USB3 devices don't have a similar disabled link state as USB2 devices, and use a U3 suspended link state instead. In this state the port is still enabled and connected. hub_port_connect() first disconnects the device, then later it notices that device is still enabled (due to U3 states) it will try to disable the port again (set to U3). The xhci_free_dev() called during device disable is async, so checking for existing xhci->devs[i] when setting link state to U3 the second time was successful, even if device was being freed. The regression was caused by, and whole thing revealed by, Commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") which sets xhci->devs[i]->udev to NULL before xhci_virt_dev() returned. and causes a NULL pointer dereference the second time we try to set U3. Fix this by checking xhci->devs[i]->udev exists before setting link state. The original patch went to stable so this fix needs to be applied there as well. Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: <stable@vger.kernel.org> Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch> Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2278446e2b7cd33ad894b32e7eb63afc7db6c86e upstream.

Hub driver will try to disable a USB3 device twice at logical disconnect,
racing with xhci_free_dev() callback from the first port disable.

This can be triggered with "udisksctl power-off --block-device <disk>"
or by writing "1" to the "remove" sysfs file for a USB3 device
in 4.17-rc4.

USB3 devices don't have a similar disabled link state as USB2 devices,
and use a U3 suspended link state instead. In this state the port
is still enabled and connected.

hub_port_connect() first disconnects the device, then later it notices
that device is still enabled (due to U3 states) it will try to disable
the port again (set to U3).

The xhci_free_dev() called during device disable is async, so checking
for existing xhci->devs[i] when setting link state to U3 the second time
was successful, even if device was being freed.

The regression was caused by, and whole thing revealed by,
Commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
which sets xhci->devs[i]->udev to NULL before xhci_virt_dev() returned.
and causes a NULL pointer dereference the second time we try to set U3.

Fix this by checking xhci->devs[i]->udev exists before setting link state.

The original patch went to stable so this fix needs to be applied there as
well.

Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
Cc: <stable@vger.kernel.org>
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: ehci-omap: fix error return code in ehci_hcd_omap_probe() 2018-11-10T15:41:39+00:00 Gustavo A. R. Silva gustavo@embeddedor.com 2017-08-08T22:26:13+00:00 fd5939e73ea78ac33e597de3b7677c3d7dc50e63 [ Upstream commit 99dbff202e28ad1dadf55b058bcae7908678e963 ] platform_get_irq() returns an error code, but the ehci-omap driver ignores it and always returns -ENODEV. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Also, notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 99dbff202e28ad1dadf55b058bcae7908678e963 ]

platform_get_irq() returns an error code, but the ehci-omap driver
ignores it and always returns -ENODEV. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.

Also, notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af

Print and propagate the return value of platform_get_irq on failure.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: imx21-hcd: fix error return code in imx21_probe() 2018-11-10T15:41:39+00:00 Gustavo A. R. Silva gustavo@embeddedor.com 2017-08-08T04:14:23+00:00 047719209751af5133cf7614f2d6edce495d11e5 [ Upstream commit 46edf52d08342b3dc1f9a61c5200ab8b1c0f5a37 ] platform_get_irq() returns an error code, but the imx21-hcd driver ignores it and always returns -ENXIO. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print error message and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 46edf52d08342b3dc1f9a61c5200ab8b1c0f5a37 ]

platform_get_irq() returns an error code, but the imx21-hcd driver
ignores it and always returns -ENXIO. This is not correct, and
prevents -EPROBE_DEFER from being propagated properly.

Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af

Print error message and propagate the return value of platform_get_irq
on failure.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
xhci: Don't print a warning when setting link state for disabled ports 2018-10-20T07:52:35+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2018-02-12T12:24:47+00:00 f37a3ff6e4c7cb93eb65c6fc6c549fafa2673863 commit 1208d8a84fdcae6b395c57911cdf907450d30e70 upstream. When disabling a USB3 port the hub driver will set the port link state to U3 to prevent "ejected" or "safely removed" devices that are still physically connected from immediately re-enumerating. If the device was really unplugged, then error messages were printed as the hub tries to set the U3 link state for a port that is no longer enabled. xhci-hcd ee000000.usb: Cannot set link state. usb usb8-port1: cannot disable (err = -32) Don't print error message in xhci-hub if hub tries to set port link state for a disabled port. Return -ENODEV instead which also silences hub driver. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1208d8a84fdcae6b395c57911cdf907450d30e70 upstream.

When disabling a USB3 port the hub driver will set the port link state to
U3 to prevent "ejected" or "safely removed" devices that are still
physically connected from immediately re-enumerating.

If the device was really unplugged, then error messages were printed
as the hub tries to set the U3 link state for a port that is no longer
enabled.

xhci-hcd ee000000.usb: Cannot set link state.
usb usb8-port1: cannot disable (err = -32)

Don't print error message in xhci-hub if hub tries to set port link state
for a disabled port. Return -ENODEV instead which also silences hub driver.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Add missing CAS workaround for Intel Sunrise Point xHCI 2018-10-13T07:11:32+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2018-10-01T15:36:07+00:00 ed8649a4691b52228bbbeca87780e284f2c62456 commit ffe84e01bb1b38c7eb9c6b6da127a6c136d251df upstream. The workaround for missing CAS bit is also needed for xHC on Intel sunrisepoint PCH. For more details see: Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ffe84e01bb1b38c7eb9c6b6da127a6c136d251df upstream.

The workaround for missing CAS bit is also needed for xHC on Intel
sunrisepoint PCH. For more details see:

Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame() 2018-09-26T06:35:07+00:00 Jia-Ju Bai baijiaju1990@gmail.com 2018-09-01T09:23:47+00:00 637acc7bdebc53500f13d7da1b37825e21b2e588 commit 6d4f268fa132742fe96dad22307c68d237356d88 upstream. i_usX2Y_subs_startup in usbusx2yaudio.c is a completion handler function for the USB driver. So it should not sleep, but it is can sleep according to the function call paths (from bottom to top) in Linux-4.16. [FUNC] msleep drivers/usb/host/u132-hcd.c, 2558: msleep in u132_get_frame drivers/usb/core/hcd.c, 2231: [FUNC_PTR]u132_get_frame in usb_hcd_get_frame_number drivers/usb/core/usb.c, 822: usb_hcd_get_frame_number in usb_get_current_frame_number sound/usb/usx2y/usbusx2yaudio.c, 303: usb_get_current_frame_number in i_usX2Y_urb_complete sound/usb/usx2y/usbusx2yaudio.c, 366: i_usX2Y_urb_complete in i_usX2Y_subs_startup Note that [FUNC_PTR] means a function pointer call is used. To fix this bug, msleep() is replaced with mdelay(). This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6d4f268fa132742fe96dad22307c68d237356d88 upstream.

i_usX2Y_subs_startup in usbusx2yaudio.c is a completion handler function
for the USB driver. So it should not sleep, but it is can sleep
according to the function call paths (from bottom to top) in Linux-4.16.

[FUNC] msleep
drivers/usb/host/u132-hcd.c, 2558:
	msleep in u132_get_frame
drivers/usb/core/hcd.c, 2231:
	[FUNC_PTR]u132_get_frame in usb_hcd_get_frame_number
drivers/usb/core/usb.c, 822:
	usb_hcd_get_frame_number in usb_get_current_frame_number
sound/usb/usx2y/usbusx2yaudio.c, 303:
	usb_get_current_frame_number in i_usX2Y_urb_complete
sound/usb/usx2y/usbusx2yaudio.c, 366:
	i_usX2Y_urb_complete in i_usX2Y_subs_startup

Note that [FUNC_PTR] means a function pointer call is used.

To fix this bug, msleep() is replaced with mdelay().

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix use-after-free in xhci_free_virt_device 2018-09-19T20:48:59+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2018-05-03T14:30:07+00:00 c72a42d38b1f516b3533400a2d7ac90388b35e6c commit 44a182b9d17765514fa2b1cc911e4e65134eef93 upstream. KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e where xhci_free_virt_device() sets slot id to 0 if udev exists: if (dev->udev && dev->udev->slot_id) dev->udev->slot_id = 0; dev->udev will be true even if udev is freed because dev->udev is not set to NULL. set dev->udev pointer to NULL in xhci_free_dev() The original patch went to stable so this fix needs to be applied there as well. Fixes: a400efe455f7 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot") Cc: <stable@vger.kernel.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 44a182b9d17765514fa2b1cc911e4e65134eef93 upstream.

KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e
where xhci_free_virt_device() sets slot id to 0 if udev exists:
if (dev->udev && dev->udev->slot_id)
	dev->udev->slot_id = 0;

dev->udev will be true even if udev is freed because dev->udev is
not set to NULL.

set dev->udev pointer to NULL in xhci_free_dev()

The original patch went to stable so this fix needs to be applied
there as well.

Fixes: a400efe455f7 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot")
Cc: <stable@vger.kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>