linux-stable.git/drivers/usb/host, branch v4.19.321 Linux kernel stable tree xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration 2024-09-04T11:12:58+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2024-08-15T14:11:17+00:00 ef0a0e616b2789bb804a0ce5e161db03170a85b6 commit af8e119f52e9c13e556be9e03f27957554a84656 upstream. re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated. Reported-by: Karel Balej <balejk@matfyz.cz> Closes: https://lore.kernel.org/linux-usb/D3CKQQAETH47.1MUO22RTCH2O3@matfyz.cz/ Cc: stable@vger.kernel.org Fixes: 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240815141117.2702314-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit af8e119f52e9c13e556be9e03f27957554a84656 upstream.

re-enumerating full-speed devices after a failed address device command
can trigger a NULL pointer dereference.

Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size
value during enumeration. Usb core calls usb_ep0_reinit() in this case,
which ends up calling xhci_configure_endpoint().

On Panther point xHC the xhci_configure_endpoint() function will
additionally check and reserve bandwidth in software. Other hosts do
this in hardware

If xHC address device command fails then a new xhci_virt_device structure
is allocated as part of re-enabling the slot, but the bandwidth table
pointers are not set up properly here.
This triggers the NULL pointer dereference the next time usb_ep0_reinit()
is called and xhci_configure_endpoint() tries to check and reserve
bandwidth

[46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd
[46710.713699] usb 3-1: Device not responding to setup address.
[46710.917684] usb 3-1: Device not responding to setup address.
[46711.125536] usb 3-1: device not accepting address 5, error -71
[46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008
[46711.125600] #PF: supervisor read access in kernel mode
[46711.125603] #PF: error_code(0x0000) - not-present page
[46711.125606] PGD 0 P4D 0
[46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI
[46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1
[46711.125620] Hardware name: Gigabyte Technology Co., Ltd.
[46711.125623] Workqueue: usb_hub_wq hub_event [usbcore]
[46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c

Fix this by making sure bandwidth table pointers are set up correctly
after a failed address device command, and additionally by avoiding
checking for bandwidth in cases like this where no actual endpoints are
added or removed, i.e. only context for default control endpoint 0 is
evaluated.

Reported-by: Karel Balej <balejk@matfyz.cz>
Closes: https://lore.kernel.org/linux-usb/D3CKQQAETH47.1MUO22RTCH2O3@matfyz.cz/
Cc: stable@vger.kernel.org
Fixes: 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240815141117.2702314-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: do not perform Soft Retry for some xHCI hosts 2024-07-05T07:00:31+00:00 Stanislaw Gruszka stf_xl@wp.pl 2021-03-11T11:53:50+00:00 2a28c0f457c5563cef9fbad803d9445eee0c1e05 commit a4a251f8c23518899d2078c320cf9ce2fa459c9f upstream. On some systems rt2800usb and mt7601u devices are unable to operate since commit f8f80be501aa ("xhci: Use soft retry to recover faster from transaction errors") Seems that some xHCI controllers can not perform Soft Retry correctly, affecting those devices. To avoid the problem add xhci->quirks flag that restore pre soft retry xhci behaviour for affected xHCI controllers. Currently those are AMD_PROMONTORYA_4 and AMD_PROMONTORYA_2, since it was confirmed by the users: on those xHCI hosts issue happen and is gone after disabling Soft Retry. [minor commit message rewording for checkpatch -Mathias] Fixes: f8f80be501aa ("xhci: Use soft retry to recover faster from transaction errors") Cc: <stable@vger.kernel.org> # 4.20+ Reported-by: Bernhard <bernhard.gebetsberger@gmx.at> Tested-by: Bernhard <bernhard.gebetsberger@gmx.at> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202541 Link: https://lore.kernel.org/r/20210311115353.2137560-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a4a251f8c23518899d2078c320cf9ce2fa459c9f upstream.

On some systems rt2800usb and mt7601u devices are unable to operate since
commit f8f80be501aa ("xhci: Use soft retry to recover faster from
transaction errors")

Seems that some xHCI controllers can not perform Soft Retry correctly,
affecting those devices.

To avoid the problem add xhci->quirks flag that restore pre soft retry
xhci behaviour for affected xHCI controllers. Currently those are
AMD_PROMONTORYA_4 and AMD_PROMONTORYA_2, since it was confirmed
by the users: on those xHCI hosts issue happen and is gone after
disabling Soft Retry.

[minor commit message rewording for checkpatch -Mathias]

Fixes: f8f80be501aa ("xhci: Use soft retry to recover faster from transaction errors")
Cc: <stable@vger.kernel.org> # 4.20+
Reported-by: Bernhard <bernhard.gebetsberger@gmx.at>
Tested-by: Bernhard <bernhard.gebetsberger@gmx.at>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202541
Link: https://lore.kernel.org/r/20210311115353.2137560-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Set correct transferred length for cancelled bulk transfers 2024-07-05T07:00:31+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2024-06-11T12:06:07+00:00 ca0f0c5b0b991a71f61948bad09eb5f9e8cc4851 [ Upstream commit f0260589b439e2637ad54a2b25f00a516ef28a57 ] The transferred length is set incorrectly for cancelled bulk transfer TDs in case the bulk transfer ring stops on the last transfer block with a 'Stop - Length Invalid' completion code. length essentially ends up being set to the requested length: urb->actual_length = urb->transfer_buffer_length Length for 'Stop - Length Invalid' cases should be the sum of all TRB transfer block lengths up to the one the ring stopped on, _excluding_ the one stopped on. Fix this by always summing up TRB lengths for 'Stop - Length Invalid' bulk cases. This issue was discovered by Alan Stern while debugging https://bugzilla.kernel.org/show_bug.cgi?id=218890, but does not solve that bug. Issue is older than 4.10 kernel but fix won't apply to those due to major reworks in that area. Tested-by: Pierre Tomon <pierretom+12@ik.me> Cc: stable@vger.kernel.org # v4.10+ Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240611120610.3264502-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f0260589b439e2637ad54a2b25f00a516ef28a57 ]

The transferred length is set incorrectly for cancelled bulk
transfer TDs in case the bulk transfer ring stops on the last transfer
block with a 'Stop - Length Invalid' completion code.

length essentially ends up being set to the requested length:
urb->actual_length = urb->transfer_buffer_length

Length for 'Stop - Length Invalid' cases should be the sum of all
TRB transfer block lengths up to the one the ring stopped on,
_excluding_ the one stopped on.

Fix this by always summing up TRB lengths for 'Stop - Length Invalid'
bulk cases.

This issue was discovered by Alan Stern while debugging
https://bugzilla.kernel.org/show_bug.cgi?id=218890, but does not
solve that bug. Issue is older than 4.10 kernel but fix won't apply
to those due to major reworks in that area.

Tested-by: Pierre Tomon <pierretom+12@ik.me>
Cc: stable@vger.kernel.org # v4.10+
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240611120610.3264502-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
xhci: Use soft retry to recover faster from transaction errors 2024-07-05T07:00:30+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2018-09-20T16:13:37+00:00 8f667ee530a601449fede56370036e1d8d9a62dc [ Upstream commit f8f80be501aa2f10669585c3e328fad079d8cb3a ] Use soft retry to recover from a USB Transaction Errors that are caused by temporary error conditions. The USB device is not aware that the xHC has halted the endpoint, and will be waiting for another retry A Soft Retry perform additional retries and recover from an error which has caused the xHC to halt an endpoint. Soft retry has some limitations: Soft Retry attempts shall not be performed on Isoch endpoints Soft Retry attempts shall not be performed if the device is behind a TT in a HS Hub Software shall limit the number of unsuccessful Soft Retry attempts to prevent an infinite loop. For more details on Soft retry see xhci specs 4.6.8.1 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: f0260589b439 ("xhci: Set correct transferred length for cancelled bulk transfers") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f8f80be501aa2f10669585c3e328fad079d8cb3a ]

Use soft retry to recover from a USB Transaction Errors that are caused by
temporary error conditions. The USB device is not aware that the xHC
has halted the endpoint, and will be waiting for another retry

A Soft Retry perform additional retries and recover from an error which has
caused the xHC to halt an endpoint.

Soft retry has some limitations:
Soft Retry attempts shall not be performed on Isoch endpoints
Soft Retry attempts shall not be performed if the device is behind a TT in
a HS Hub

Software shall limit the number of unsuccessful Soft Retry attempts to
prevent an infinite loop.

For more details on Soft retry see xhci specs  4.6.8.1

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f0260589b439 ("xhci: Set correct transferred length for cancelled bulk transfers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
xhci: Apply broken streams quirk to Etron EJ188 xHCI host 2024-07-05T07:00:23+00:00 Kuangyi Chiang ki.chiang65@gmail.com 2024-06-11T12:06:09+00:00 5c08d8bcc6f20965d665a6122a3fe60eba042e74 commit 91f7a1524a92c70ffe264db8bdfa075f15bbbeb9 upstream. As described in commit 8f873c1ff4ca ("xhci: Blacklist using streams on the Etron EJ168 controller"), EJ188 have the same issue as EJ168, where Streams do not work reliable on EJ188. So apply XHCI_BROKEN_STREAMS quirk to EJ188 as well. Cc: stable@vger.kernel.org Signed-off-by: Kuangyi Chiang <ki.chiang65@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240611120610.3264502-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 91f7a1524a92c70ffe264db8bdfa075f15bbbeb9 upstream.

As described in commit 8f873c1ff4ca ("xhci: Blacklist using streams on the
Etron EJ168 controller"), EJ188 have the same issue as EJ168, where Streams
do not work reliable on EJ188. So apply XHCI_BROKEN_STREAMS quirk to EJ188
as well.

Cc: stable@vger.kernel.org
Signed-off-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240611120610.3264502-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Apply reset resume quirk to Etron EJ188 xHCI host 2024-07-05T07:00:23+00:00 Kuangyi Chiang ki.chiang65@gmail.com 2024-06-11T12:06:08+00:00 a2ddc0475c4c6fff5b9eac0e0eb4726640925e1b commit 17bd54555c2aaecfdb38e2734149f684a73fa584 upstream. As described in commit c877b3b2ad5c ("xhci: Add reset on resume quirk for asrock p67 host"), EJ188 have the same issue as EJ168, where completely dies on resume. So apply XHCI_RESET_ON_RESUME quirk to EJ188 as well. Cc: stable@vger.kernel.org Signed-off-by: Kuangyi Chiang <ki.chiang65@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240611120610.3264502-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 17bd54555c2aaecfdb38e2734149f684a73fa584 upstream.

As described in commit c877b3b2ad5c ("xhci: Add reset on resume quirk for
asrock p67 host"), EJ188 have the same issue as EJ168, where completely
dies on resume. So apply XHCI_RESET_ON_RESUME quirk to EJ188 as well.

Cc: stable@vger.kernel.org
Signed-off-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240611120610.3264502-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined 2024-04-13T10:50:16+00:00 Colin Ian King colin.i.king@gmail.com 2024-03-07T11:13:51+00:00 f90519f1d6a0c4d86bcd401f34bda11486fa4284 [ Upstream commit 12f371e2b6cb4b79c788f1f073992e115f4ca918 ] Function checkdone is only required if QUIRK2 is defined, so add appropriate #if / #endif around the function. Cleans up clang scan build warning: drivers/usb/host/sl811-hcd.c:588:18: warning: unused function 'checkdone' [-Wunused-function] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240307111351.1982382-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 12f371e2b6cb4b79c788f1f073992e115f4ca918 ]

Function checkdone is only required if QUIRK2 is defined, so add
appropriate #if / #endif around the function.

Cleans up clang scan build warning:
drivers/usb/host/sl811-hcd.c:588:18: warning: unused function
'checkdone' [-Wunused-function]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240307111351.1982382-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: fotg210-hcd: delete an incorrect bounds test 2024-01-08T10:27:37+00:00 Dan Carpenter dan.carpenter@linaro.org 2023-12-13T13:22:43+00:00 cab15e2e7075396011ae02ef4fa866404a89f63c [ Upstream commit 7fbcd195e2b8cc952e4aeaeb50867b798040314c ] Here "temp" is the number of characters that we have written and "size" is the size of the buffer. The intent was clearly to say that if we have written to the end of the buffer then stop. However, for that to work the comparison should have been done on the original "size" value instead of the "size -= temp" value. Not only will that not trigger when we want to, but there is a small chance that it will trigger incorrectly before we want it to and we break from the loop slightly earlier than intended. This code was recently changed from using snprintf() to scnprintf(). With snprintf() we likely would have continued looping and passed a negative size parameter to snprintf(). This would have triggered an annoying WARN(). Now that we have converted to scnprintf() "size" will never drop below 1 and there is no real need for this test. We could change the condition to "if (temp <= 1) goto done;" but just deleting the test is cleanest. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Cc: stable <stable@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7fbcd195e2b8cc952e4aeaeb50867b798040314c ]

Here "temp" is the number of characters that we have written and "size"
is the size of the buffer.  The intent was clearly to say that if we have
written to the end of the buffer then stop.

However, for that to work the comparison should have been done on the
original "size" value instead of the "size -= temp" value.  Not only
will that not trigger when we want to, but there is a small chance that
it will trigger incorrectly before we want it to and we break from the
loop slightly earlier than intended.

This code was recently changed from using snprintf() to scnprintf().  With
snprintf() we likely would have continued looping and passed a negative
size parameter to snprintf().  This would have triggered an annoying
WARN().  Now that we have converted to scnprintf() "size" will never
drop below 1 and there is no real need for this test.  We could change
the condition to "if (temp <= 1) goto done;" but just deleting the test
is cleanest.

Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer 2023-10-25T09:16:27+00:00 Wesley Cheng quic_wcheng@quicinc.com 2023-09-15T14:31:05+00:00 02db98cb303fedb5e21c093c2951ad70fa8f4ab3 commit 41a43013d2366db5b88b42bbcd8e8f040b6ccf21 upstream. As mentioned in: commit 474ed23a6257 ("xhci: align the last trb before link if it is easily splittable.") A bounce buffer is utilized for ensuring that transfers that span across ring segments are aligned to the EP's max packet size. However, the device that is used to map the DMA buffer to is currently using the XHCI HCD, which does not carry any DMA operations in certain configrations. Migration to using the sysdev entry was introduced for DWC3 based implementations where the IOMMU operations are present. Replace the reference to the controller device to sysdev instead. This allows the bounce buffer to be properly mapped to any implementations that have an IOMMU involved. cc: stable@vger.kernel.org Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 41a43013d2366db5b88b42bbcd8e8f040b6ccf21 upstream.

As mentioned in:
  commit 474ed23a6257 ("xhci: align the last trb before link if it is
easily splittable.")

A bounce buffer is utilized for ensuring that transfers that span across
ring segments are aligned to the EP's max packet size.  However, the device
that is used to map the DMA buffer to is currently using the XHCI HCD,
which does not carry any DMA operations in certain configrations.
Migration to using the sysdev entry was introduced for DWC3 based
implementations where the IOMMU operations are present.

Replace the reference to the controller device to sysdev instead.  This
allows the bounce buffer to be properly mapped to any implementations that
have an IOMMU involved.

cc: stable@vger.kernel.org
Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration")
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230915143108.1532163-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci-mtk: set the dma max_seg_size 2023-08-11T09:45:34+00:00 Ricardo Ribalda ribalda@chromium.org 2023-07-19T13:01:04+00:00 f40a8bd536e3da1f4054f0f3589ebb31d7a7bade commit 9fd10829a9eb482e192a845675ecc5480e0bfa10 upstream. Allow devices to have dma operations beyond 64K, and avoid warnings such as: DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536] Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller") Cc: stable <stable@kernel.org> Tested-by: Zubin Mithra <zsm@chromium.org> Reported-by: Zubin Mithra <zsm@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20230628-mtk-usb-v2-1-c8c34eb9f229@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9fd10829a9eb482e192a845675ecc5480e0bfa10 upstream.

Allow devices to have dma operations beyond 64K, and avoid warnings such
as:

DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536]

Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
Cc: stable <stable@kernel.org>
Tested-by: Zubin Mithra <zsm@chromium.org>
Reported-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20230628-mtk-usb-v2-1-c8c34eb9f229@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>