linux-stable.git/drivers/usb/host, branch v4.16.7 Linux kernel stable tree xhci: Fix USB ports for Dell Inspiron 5775 2018-05-01T19:47:19+00:00 Kai-Heng Feng kai.heng.feng@canonical.com 2018-04-20T13:52:50+00:00 ddac0e5e06dbdf99d7254fc6fa1820926d46f8f5 commit 621faf4f6a181b6e012c1d1865213f36f4159b7f upstream. The Dell Inspiron 5775 is a Raven Ridge. The Enable Slot command timed out when a USB device gets plugged: [ 212.156326] xhci_hcd 0000:03:00.3: Error while assigning device slot ID [ 212.156340] xhci_hcd 0000:03:00.3: Max number of devices this xHCI host supports is 64. [ 212.156348] usb usb2-port3: couldn't allocate usb_device AMD suggests that a delay before xHC suspends can fix the issue. I can confirm it fixes the issue, so use the suspend delay quirk for Raven Ridge's xHC. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 621faf4f6a181b6e012c1d1865213f36f4159b7f upstream.

The Dell Inspiron 5775 is a Raven Ridge. The Enable Slot command timed
out when a USB device gets plugged:
[ 212.156326] xhci_hcd 0000:03:00.3: Error while assigning device slot ID
[ 212.156340] xhci_hcd 0000:03:00.3: Max number of devices this xHCI host supports is 64.
[ 212.156348] usb usb2-port3: couldn't allocate usb_device

AMD suggests that a delay before xHC suspends can fix the issue.

I can confirm it fixes the issue, so use the suspend delay quirk for
Raven Ridge's xHC.

Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix Kernel oops in xhci dbgtty 2018-05-01T19:47:19+00:00 Zhengjun Xing zhengjun.xing@linux.intel.com 2018-04-13T12:55:34+00:00 0f5bb9e007772deeab0635204a181845831dca9e commit 7fc65d4c2ba9e5006c629669146c6876b65aa233 upstream. tty_unregister_driver may be called more than 1 time in some hotplug cases,it will cause the kernel oops. This patch checked dbc_tty_driver to make sure it is unregistered only 1 time. [ 175.741404] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 [ 175.742309] IP: tty_unregister_driver+0x9/0x70 [ 175.743148] PGD 0 P4D 0 [ 175.743981] Oops: 0000 [#1] SMP PTI [ 175.753904] RIP: 0010:tty_unregister_driver+0x9/0x70 [ 175.754817] RSP: 0018:ffffa8ff831d3bb0 EFLAGS: 00010246 [ 175.755753] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 175.756685] RDX: ffff92089c616000 RSI: ffffe64fe1b26080 RDI: 0000000000000000 [ 175.757608] RBP: ffff92086c988230 R08: 000000006c982701 R09: 00000001801e0016 [ 175.758533] R10: ffffa8ff831d3b48 R11: ffff92086c982100 R12: ffff92086c98827c [ 175.759462] R13: ffff92086c988398 R14: 0000000000000060 R15: ffff92089c5e9b40 [ 175.760401] FS: 0000000000000000(0000) GS:ffff9208a0100000(0000) knlGS:0000000000000000 [ 175.761334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 175.762270] CR2: 0000000000000034 CR3: 000000011800a003 CR4: 00000000003606e0 [ 175.763225] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 175.764164] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 175.765091] Call Trace: [ 175.766014] xhci_dbc_tty_unregister_driver+0x11/0x30 [ 175.766960] xhci_dbc_exit+0x2a/0x40 [ 175.767889] xhci_stop+0x57/0x1c0 [ 175.768824] usb_remove_hcd+0x100/0x250 [ 175.769708] usb_hcd_pci_remove+0x68/0x130 [ 175.770574] pci_device_remove+0x3b/0xc0 [ 175.771435] device_release_driver_internal+0x157/0x230 [ 175.772343] pci_stop_bus_device+0x74/0xa0 [ 175.773205] pci_stop_bus_device+0x2b/0xa0 [ 175.774061] pci_stop_bus_device+0x2b/0xa0 [ 175.774907] pci_stop_bus_device+0x2b/0xa0 [ 175.775741] pci_stop_bus_device+0x2b/0xa0 [ 175.776618] pci_stop_bus_device+0x2b/0xa0 [ 175.777452] pci_stop_bus_device+0x2b/0xa0 [ 175.778273] pci_stop_bus_device+0x2b/0xa0 [ 175.779092] pci_stop_bus_device+0x2b/0xa0 [ 175.779908] pci_stop_bus_device+0x2b/0xa0 [ 175.780750] pci_stop_bus_device+0x2b/0xa0 [ 175.781543] pci_stop_and_remove_bus_device+0xe/0x20 [ 175.782338] pciehp_unconfigure_device+0xb8/0x160 [ 175.783128] pciehp_disable_slot+0x4f/0xd0 [ 175.783920] pciehp_power_thread+0x82/0xa0 [ 175.784766] process_one_work+0x147/0x3c0 [ 175.785564] worker_thread+0x4a/0x440 [ 175.786376] kthread+0xf8/0x130 [ 175.787174] ? rescuer_thread+0x360/0x360 [ 175.787964] ? kthread_associate_blkcg+0x90/0x90 [ 175.788798] ret_from_fork+0x35/0x40 Cc: <stable@vger.kernel.org> # 4.16 Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Tested-by: Christian Kellner <christian@kellner.me> Reviewed-by: Christian Kellner <christian@kellner.me> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7fc65d4c2ba9e5006c629669146c6876b65aa233 upstream.

tty_unregister_driver may be called more than 1 time in some
hotplug cases,it will cause the kernel oops. This patch checked
dbc_tty_driver to make sure it is unregistered only 1 time.

[  175.741404] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034
[  175.742309] IP: tty_unregister_driver+0x9/0x70
[  175.743148] PGD 0 P4D 0
[  175.743981] Oops: 0000 [#1] SMP PTI
[  175.753904] RIP: 0010:tty_unregister_driver+0x9/0x70
[  175.754817] RSP: 0018:ffffa8ff831d3bb0 EFLAGS: 00010246
[  175.755753] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  175.756685] RDX: ffff92089c616000 RSI: ffffe64fe1b26080 RDI: 0000000000000000
[  175.757608] RBP: ffff92086c988230 R08: 000000006c982701 R09: 00000001801e0016
[  175.758533] R10: ffffa8ff831d3b48 R11: ffff92086c982100 R12: ffff92086c98827c
[  175.759462] R13: ffff92086c988398 R14: 0000000000000060 R15: ffff92089c5e9b40
[  175.760401] FS:  0000000000000000(0000) GS:ffff9208a0100000(0000) knlGS:0000000000000000
[  175.761334] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  175.762270] CR2: 0000000000000034 CR3: 000000011800a003 CR4: 00000000003606e0
[  175.763225] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  175.764164] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  175.765091] Call Trace:
[  175.766014]  xhci_dbc_tty_unregister_driver+0x11/0x30
[  175.766960]  xhci_dbc_exit+0x2a/0x40
[  175.767889]  xhci_stop+0x57/0x1c0
[  175.768824]  usb_remove_hcd+0x100/0x250
[  175.769708]  usb_hcd_pci_remove+0x68/0x130
[  175.770574]  pci_device_remove+0x3b/0xc0
[  175.771435]  device_release_driver_internal+0x157/0x230
[  175.772343]  pci_stop_bus_device+0x74/0xa0
[  175.773205]  pci_stop_bus_device+0x2b/0xa0
[  175.774061]  pci_stop_bus_device+0x2b/0xa0
[  175.774907]  pci_stop_bus_device+0x2b/0xa0
[  175.775741]  pci_stop_bus_device+0x2b/0xa0
[  175.776618]  pci_stop_bus_device+0x2b/0xa0
[  175.777452]  pci_stop_bus_device+0x2b/0xa0
[  175.778273]  pci_stop_bus_device+0x2b/0xa0
[  175.779092]  pci_stop_bus_device+0x2b/0xa0
[  175.779908]  pci_stop_bus_device+0x2b/0xa0
[  175.780750]  pci_stop_bus_device+0x2b/0xa0
[  175.781543]  pci_stop_and_remove_bus_device+0xe/0x20
[  175.782338]  pciehp_unconfigure_device+0xb8/0x160
[  175.783128]  pciehp_disable_slot+0x4f/0xd0
[  175.783920]  pciehp_power_thread+0x82/0xa0
[  175.784766]  process_one_work+0x147/0x3c0
[  175.785564]  worker_thread+0x4a/0x440
[  175.786376]  kthread+0xf8/0x130
[  175.787174]  ? rescuer_thread+0x360/0x360
[  175.787964]  ? kthread_associate_blkcg+0x90/0x90
[  175.788798]  ret_from_fork+0x35/0x40

Cc: <stable@vger.kernel.org> # 4.16
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Tested-by: Christian Kellner <christian@kellner.me>
Reviewed-by: Christian Kellner <christian@kellner.me>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "xhci: plat: Register shutdown for xhci_plat" 2018-05-01T19:47:19+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2018-04-22T12:31:03+00:00 6b9cd4e1b6333ac18530c2b366a97bff5d84b3e6 commit c20f53c58261b121d0989e147368803b9773b413 upstream. This reverts commit b07c12517f2aed0add8ce18146bb426b14099392 It is incomplete and causes hangs on devices when shutting down. It needs a much more "complete" fix in order to work properly. As that fix has not been merged, revert this patch for now before it causes any more problems. Cc: Greg Hackmann <ghackmann@google.com> Cc: Adam Wallis <awallis@codeaurora.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c20f53c58261b121d0989e147368803b9773b413 upstream.

This reverts commit b07c12517f2aed0add8ce18146bb426b14099392

It is incomplete and causes hangs on devices when shutting down.  It
needs a much more "complete" fix in order to work properly.  As that fix
has not been merged, revert this patch for now before it causes any more
problems.

Cc: Greg Hackmann <ghackmann@google.com>
Cc: Adam Wallis <awallis@codeaurora.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM 2018-03-09T18:41:42+00:00 Fredrik Noring noring@nocrew.org 2018-03-09T17:34:34+00:00 d6c931ea32dc08ac2665bb5f009f9c40ad1bbdb3 Scatter-gather needs to be disabled when using dma_declare_coherent_memory and HCD_LOCAL_MEM. Andrea Righi made the equivalent fix for EHCI drivers in commit 4307a28eb01284 "USB: EHCI: fix NULL pointer dererence in HCDs that use HCD_LOCAL_MEM". The following NULL pointer WARN_ON_ONCE triggered with OHCI drivers: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 49 at drivers/usb/core/hcd.c:1379 hcd_alloc_coherent+0x4c/0xc8 Modules linked in: CPU: 0 PID: 49 Comm: usb-storage Not tainted 4.15.0+ #1014 Stack : 00000000 00000000 805a78d2 0000003a 81f5c2cc 8053d367 804d77fc 00000031 805a3a08 00000563 81ee9400 805a0000 00000000 10058c00 81f61b10 805c0000 00000000 00000000 805a0000 00d9038e 00000004 803ee818 00000006 312e3420 805c0000 00000000 00000073 81f61958 00000000 00000000 802eb380 804fd538 00000009 00000563 81ee9400 805a0000 00000002 80056148 00000000 805a0000 ... Call Trace: [<578af360>] show_stack+0x74/0x104 [<2f3702c6>] __warn+0x118/0x120 [<ae93fc9e>] warn_slowpath_null+0x44/0x58 [<a891a517>] hcd_alloc_coherent+0x4c/0xc8 [<3578fa36>] usb_hcd_map_urb_for_dma+0x4d8/0x534 [<110bc94c>] usb_hcd_submit_urb+0x82c/0x834 [<02eb5baf>] usb_sg_wait+0x14c/0x1a0 [<ccd09e85>] usb_stor_bulk_transfer_sglist.part.1+0xac/0x124 [<87a5c34c>] usb_stor_bulk_srb+0x40/0x60 [<ff1792ac>] usb_stor_Bulk_transport+0x160/0x37c [<b9e2709c>] usb_stor_invoke_transport+0x3c/0x500 [<004754f4>] usb_stor_control_thread+0x258/0x28c [<22edf42e>] kthread+0x134/0x13c [<a419ffd0>] ret_from_kernel_thread+0x14/0x1c ---[ end trace bcdb825805eefdcc ]--- Signed-off-by: Fredrik Noring <noring@nocrew.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Scatter-gather needs to be disabled when using dma_declare_coherent_memory
and HCD_LOCAL_MEM. Andrea Righi made the equivalent fix for EHCI drivers
in commit 4307a28eb01284 "USB: EHCI: fix NULL pointer dererence in HCDs
that use HCD_LOCAL_MEM".

The following NULL pointer WARN_ON_ONCE triggered with OHCI drivers:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 49 at drivers/usb/core/hcd.c:1379 hcd_alloc_coherent+0x4c/0xc8
Modules linked in:
CPU: 0 PID: 49 Comm: usb-storage Not tainted 4.15.0+ #1014
Stack : 00000000 00000000 805a78d2 0000003a 81f5c2cc 8053d367 804d77fc 00000031
        805a3a08 00000563 81ee9400 805a0000 00000000 10058c00 81f61b10 805c0000
        00000000 00000000 805a0000 00d9038e 00000004 803ee818 00000006 312e3420
        805c0000 00000000 00000073 81f61958 00000000 00000000 802eb380 804fd538
        00000009 00000563 81ee9400 805a0000 00000002 80056148 00000000 805a0000
        ...
Call Trace:
[<578af360>] show_stack+0x74/0x104
[<2f3702c6>] __warn+0x118/0x120
[<ae93fc9e>] warn_slowpath_null+0x44/0x58
[<a891a517>] hcd_alloc_coherent+0x4c/0xc8
[<3578fa36>] usb_hcd_map_urb_for_dma+0x4d8/0x534
[<110bc94c>] usb_hcd_submit_urb+0x82c/0x834
[<02eb5baf>] usb_sg_wait+0x14c/0x1a0
[<ccd09e85>] usb_stor_bulk_transfer_sglist.part.1+0xac/0x124
[<87a5c34c>] usb_stor_bulk_srb+0x40/0x60
[<ff1792ac>] usb_stor_Bulk_transport+0x160/0x37c
[<b9e2709c>] usb_stor_invoke_transport+0x3c/0x500
[<004754f4>] usb_stor_control_thread+0x258/0x28c
[<22edf42e>] kthread+0x134/0x13c
[<a419ffd0>] ret_from_kernel_thread+0x14/0x1c
---[ end trace bcdb825805eefdcc ]---

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix front USB ports on ASUS PRIME B350M-A 2018-03-09T17:08:13+00:00 Kai-Heng Feng kai.heng.feng@canonical.com 2018-03-08T15:17:17+00:00 191edc5e2e515aab1075a3f0ef23599e80be5f59 When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the xHC stops working: [ 549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout [ 549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110 [ 549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110) Delay before running xHC command CMD_RUN can workaround the issue. Use a new quirk to make the delay only targets to the affected xHC. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the
xHC stops working:
[  549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout
[  549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110
[  549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110)

Delay before running xHC command CMD_RUN can workaround the issue.

Use a new quirk to make the delay only targets to the affected xHC.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing" 2018-03-09T17:08:13+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2018-03-08T15:17:16+00:00 d56e57ca030c8b4296944a2ae61ac167bf979c07 This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat: enable clk in resume timing") because this driver also has runtime PM and the commit 560869100b99 ("clk: renesas: cpg-mssr: Restore module clocks during resume") will restore the clock on R-Car H3 environment. If the xhci_plat_suspend() disables the clk, the system cannot enable the clk in resume like the following behavior: < In resume > - genpd_resume_noirq() runs and enable the clk (enable_count = 1) - cpg_mssr_resume_noirq() restores the clk register. -- Since the clk was disabled in suspend, cpg_mssr_resume_noirq() will disable the clk and keep the enable_count. - Even if xhci_plat_resume() calls clk_prepare_enable(), since the enable_count is 1, the clk will be not enabled. After this patch is applied, the cpg-mssr driver will save the clk as enable, so the clk will be enabled in resume. Fixes: 835e4241e714 ("usb: host: xhci-plat: enable clk in resume timing") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat:
enable clk in resume timing") because this driver also has runtime PM
and the commit 560869100b99 ("clk: renesas: cpg-mssr: Restore module
clocks during resume") will restore the clock on R-Car H3 environment.

If the xhci_plat_suspend() disables the clk, the system cannot enable
the clk in resume like the following behavior:

< In resume >
 - genpd_resume_noirq() runs and enable the clk (enable_count = 1)
 - cpg_mssr_resume_noirq() restores the clk register.
  -- Since the clk was disabled in suspend, cpg_mssr_resume_noirq()
     will disable the clk and keep the enable_count.
 - Even if xhci_plat_resume() calls clk_prepare_enable(), since
   the enable_count is 1, the clk will be not enabled.

After this patch is applied, the cpg-mssr driver will save the clk
as enable, so the clk will be enabled in resume.

Fixes: 835e4241e714 ("usb: host: xhci-plat: enable clk in resume timing")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: xhci-rcar: add support for r8a77965 2018-03-08T18:07:44+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2018-02-27T08:15:20+00:00 015dbeb2282030bf56762e21d25f09422edfd750 This patch adds support for r8a77965 (R-Car M3-N). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch adds support for r8a77965 (R-Car M3-N).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: dbc: Fix lockdep warning 2018-03-08T17:06:53+00:00 Lu Baolu baolu.lu@linux.intel.com 2018-03-08T15:17:15+00:00 a098dc8b03d1c7284ed98d921224fffa15b13ece The xHCI DbC implementation might enter a deadlock situation because there is no sufficient protection against the shared data between process and softirq contexts. This can lead to the following lockdep warnings. This patch changes to use spin_{,un}lock_irq{save,restore} to avoid potential deadlock. [ 528.248084] ================================ [ 528.252914] WARNING: inconsistent lock state [ 528.257756] 4.15.0-rc1+ #1630 Not tainted [ 528.262305] -------------------------------- [ 528.267145] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 528.273953] ksoftirqd/1/17 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 528.280075] (&(&port->port_lock)->rlock){+.?.}, at: [<ffffffff815396a8>] dbc_rx_push+0x38/0x1c0 [ 528.290043] {SOFTIRQ-ON-W} state was registered at: [ 528.295570] _raw_spin_lock+0x2f/0x40 [ 528.299818] dbc_write_complete+0x27/0xa0 [ 528.304458] xhci_dbc_giveback+0xd1/0x200 [ 528.309098] xhci_dbc_flush_endpoint_requests+0x50/0x70 [ 528.315116] xhci_dbc_handle_events+0x696/0x7b0 [ 528.320349] process_one_work+0x1ee/0x6e0 [ 528.324988] worker_thread+0x4a/0x430 [ 528.329236] kthread+0x13e/0x170 [ 528.332992] ret_from_fork+0x24/0x30 [ 528.337141] irq event stamp: 2861 [ 528.340897] hardirqs last enabled at (2860): [<ffffffff810674ea>] tasklet_action+0x6a/0x250 [ 528.350460] hardirqs last disabled at (2861): [<ffffffff817dc1ef>] _raw_spin_lock_irq+0xf/0x40 [ 528.360219] softirqs last enabled at (2852): [<ffffffff817e0e8c>] __do_softirq+0x3dc/0x4f9 [ 528.369683] softirqs last disabled at (2857): [<ffffffff8106805b>] run_ksoftirqd+0x1b/0x60 [ 528.379048] [ 528.379048] other info that might help us debug this: [ 528.386443] Possible unsafe locking scenario: [ 528.386443] [ 528.393150] CPU0 [ 528.395917] ---- [ 528.398687] lock(&(&port->port_lock)->rlock); [ 528.403821] <Interrupt> [ 528.406786] lock(&(&port->port_lock)->rlock); [ 528.412116] [ 528.412116] *** DEADLOCK *** [ 528.412116] [ 528.418825] no locks held by ksoftirqd/1/17. [ 528.423662] [ 528.423662] stack backtrace: [ 528.428598] CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.15.0-rc1+ #1630 [ 528.436387] Call Trace: [ 528.439158] dump_stack+0x5e/0x8e [ 528.442914] print_usage_bug+0x1fc/0x220 [ 528.447357] mark_lock+0x4db/0x5a0 [ 528.451210] __lock_acquire+0x726/0x1130 [ 528.455655] ? __lock_acquire+0x557/0x1130 [ 528.460296] lock_acquire+0xa2/0x200 [ 528.464347] ? dbc_rx_push+0x38/0x1c0 [ 528.468496] _raw_spin_lock_irq+0x35/0x40 [ 528.473038] ? dbc_rx_push+0x38/0x1c0 [ 528.477186] dbc_rx_push+0x38/0x1c0 [ 528.481139] tasklet_action+0x1d2/0x250 [ 528.485483] __do_softirq+0x1dc/0x4f9 [ 528.489630] run_ksoftirqd+0x1b/0x60 [ 528.493682] smpboot_thread_fn+0x179/0x270 [ 528.498324] kthread+0x13e/0x170 [ 528.501981] ? sort_range+0x20/0x20 [ 528.505933] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 528.511755] ret_from_fork+0x24/0x30 Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The xHCI DbC implementation might enter a deadlock situation because
there is no sufficient protection against the shared data between
process and softirq contexts. This can lead to the following lockdep
warnings. This patch changes to use spin_{,un}lock_irq{save,restore}
to avoid potential deadlock.

[ 528.248084] ================================
[ 528.252914] WARNING: inconsistent lock state
[ 528.257756] 4.15.0-rc1+ #1630 Not tainted
[ 528.262305] --------------------------------
[ 528.267145] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[ 528.273953] ksoftirqd/1/17 [HC0[0]:SC1[1]:HE0:SE0] takes:
[ 528.280075] (&(&port->port_lock)->rlock){+.?.}, at: [<ffffffff815396a8>] dbc_rx_push+0x38/0x1c0
[ 528.290043] {SOFTIRQ-ON-W} state was registered at:
[ 528.295570] _raw_spin_lock+0x2f/0x40
[ 528.299818] dbc_write_complete+0x27/0xa0
[ 528.304458] xhci_dbc_giveback+0xd1/0x200
[ 528.309098] xhci_dbc_flush_endpoint_requests+0x50/0x70
[ 528.315116] xhci_dbc_handle_events+0x696/0x7b0
[ 528.320349] process_one_work+0x1ee/0x6e0
[ 528.324988] worker_thread+0x4a/0x430
[ 528.329236] kthread+0x13e/0x170
[ 528.332992] ret_from_fork+0x24/0x30
[ 528.337141] irq event stamp: 2861
[ 528.340897] hardirqs last enabled at (2860): [<ffffffff810674ea>] tasklet_action+0x6a/0x250
[ 528.350460] hardirqs last disabled at (2861): [<ffffffff817dc1ef>] _raw_spin_lock_irq+0xf/0x40
[ 528.360219] softirqs last enabled at (2852): [<ffffffff817e0e8c>] __do_softirq+0x3dc/0x4f9
[ 528.369683] softirqs last disabled at (2857): [<ffffffff8106805b>] run_ksoftirqd+0x1b/0x60
[ 528.379048]
[ 528.379048] other info that might help us debug this:
[ 528.386443] Possible unsafe locking scenario:
[ 528.386443]
[ 528.393150] CPU0
[ 528.395917] ----
[ 528.398687] lock(&(&port->port_lock)->rlock);
[ 528.403821] <Interrupt>
[ 528.406786] lock(&(&port->port_lock)->rlock);
[ 528.412116]
[ 528.412116] *** DEADLOCK ***
[ 528.412116]
[ 528.418825] no locks held by ksoftirqd/1/17.
[ 528.423662]
[ 528.423662] stack backtrace:
[ 528.428598] CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.15.0-rc1+ #1630
[ 528.436387] Call Trace:
[ 528.439158] dump_stack+0x5e/0x8e
[ 528.442914] print_usage_bug+0x1fc/0x220
[ 528.447357] mark_lock+0x4db/0x5a0
[ 528.451210] __lock_acquire+0x726/0x1130
[ 528.455655] ? __lock_acquire+0x557/0x1130
[ 528.460296] lock_acquire+0xa2/0x200
[ 528.464347] ? dbc_rx_push+0x38/0x1c0
[ 528.468496] _raw_spin_lock_irq+0x35/0x40
[ 528.473038] ? dbc_rx_push+0x38/0x1c0
[ 528.477186] dbc_rx_push+0x38/0x1c0
[ 528.481139] tasklet_action+0x1d2/0x250
[ 528.485483] __do_softirq+0x1dc/0x4f9
[ 528.489630] run_ksoftirqd+0x1b/0x60
[ 528.493682] smpboot_thread_fn+0x179/0x270
[ 528.498324] kthread+0x13e/0x170
[ 528.501981] ? sort_range+0x20/0x20
[ 528.505933] ? kthread_delayed_work_timer_fn+0x80/0x80
[ 528.511755] ret_from_fork+0x24/0x30

Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: fix endpoint context tracer output 2018-03-08T17:06:53+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2018-03-08T15:17:14+00:00 97ef0faf575e03b352553f92c9430cb4c0431436 Fix incorrent values showed for max Primary stream and Linear stream array (LSA) values in the endpoint context decoder. Fixes: 19a7d0d65c4a ("usb: host: xhci: add Slot and EP Context tracers") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Fix incorrent values showed for max Primary stream and
Linear stream array (LSA) values in the endpoint context
decoder.

Fixes: 19a7d0d65c4a ("usb: host: xhci: add Slot and EP Context tracers")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'usb-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2018-02-22T20:13:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-02-22T20:13:01+00:00 a638af00b27266c09ab7ac69141e6f4ac6c00eff Pull USB fixes from Greg KH: "Here are a number of USB fixes for 4.16-rc3 Nothing major, but a number of different fixes all over the place in the USB stack for reported issues. Mostly gadget driver fixes, although the typical set of xhci bugfixes are there, along with some new quirks additions as well. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits) Revert "usb: musb: host: don't start next rx urb if current one failed" usb: musb: fix enumeration after resume usb: cdc_acm: prevent race at write to acm while system resumes Add delay-init quirk for Corsair K70 RGB keyboards usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() usb: host: ehci: always enable interrupt for qtd completion at test mode usb: ldusb: add PIDs for new CASSY devices supported by this driver usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path usb: host: ehci: use correct device pointer for dma ops usbip: keep usbip_device sockfd state in sync with tcp_socket ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func() USB: serial: option: Add support for Quectel EP06 xhci: fix xhci debugfs errors in xhci_stop xhci: xhci debugfs device nodes weren't removed after device plugged out xhci: Fix xhci debugfs devices node disappearance after hibernation xhci: Fix NULL pointer in xhci debugfs xhci: Don't print a warning when setting link state for disabled ports xhci: workaround for AMD Promontory disabled ports wakeup usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe() ... 
Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for 4.16-rc3

  Nothing major, but a number of different fixes all over the place in
  the USB stack for reported issues. Mostly gadget driver fixes,
  although the typical set of xhci bugfixes are there, along with some
  new quirks additions as well.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
  Revert "usb: musb: host: don't start next rx urb if current one failed"
  usb: musb: fix enumeration after resume
  usb: cdc_acm: prevent race at write to acm while system resumes
  Add delay-init quirk for Corsair K70 RGB keyboards
  usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
  usb: host: ehci: always enable interrupt for qtd completion at test mode
  usb: ldusb: add PIDs for new CASSY devices supported by this driver
  usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path
  usb: host: ehci: use correct device pointer for dma ops
  usbip: keep usbip_device sockfd state in sync with tcp_socket
  ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
  USB: serial: option: Add support for Quectel EP06
  xhci: fix xhci debugfs errors in xhci_stop
  xhci: xhci debugfs device nodes weren't removed after device plugged out
  xhci: Fix xhci debugfs devices node disappearance after hibernation
  xhci: Fix NULL pointer in xhci debugfs
  xhci: Don't print a warning when setting link state for disabled ports
  xhci: workaround for AMD Promontory disabled ports wakeup
  usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
  USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
  ...