linux-stable.git/drivers/usb/host, branch v4.14.331

usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer

2023-10-25T09:13:30+00:00

commit 41a43013d2366db5b88b42bbcd8e8f040b6ccf21 upstream.

As mentioned in:
  commit 474ed23a6257 ("xhci: align the last trb before link if it is
easily splittable.")

A bounce buffer is utilized for ensuring that transfers that span across
ring segments are aligned to the EP's max packet size.  However, the device
that is used to map the DMA buffer to is currently using the XHCI HCD,
which does not carry any DMA operations in certain configrations.
Migration to using the sysdev entry was introduced for DWC3 based
implementations where the IOMMU operations are present.

Replace the reference to the controller device to sysdev instead.  This
allows the bounce buffer to be properly mapped to any implementations that
have an IOMMU involved.

cc: stable@vger.kernel.org
Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration")
Signed-off-by: Wesley Cheng 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20230915143108.1532163-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: set the dma max_seg_size

2023-08-11T09:33:52+00:00

commit 9fd10829a9eb482e192a845675ecc5480e0bfa10 upstream.

Allow devices to have dma operations beyond 64K, and avoid warnings such
as:

DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536]

Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
Cc: stable 
Tested-by: Zubin Mithra 
Reported-by: Zubin Mithra 
Signed-off-by: Ricardo Ribalda 
Link: https://lore.kernel.org/r/20230628-mtk-usb-v2-1-c8c34eb9f229@chromium.org
Signed-off-by: Greg Kroah-Hartman

usb: ohci-at91: Fix the unhandle interrupt when resume

2023-08-11T09:33:52+00:00

commit c55afcbeaa7a6f4fffdbc999a9bf3f0b29a5186f upstream.

The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
suspend which will let the ohci_irq() skip the interrupt after resume. And
nobody to handle this interrupt.

According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset
when resume from suspend(MEM) to fix by setting "hibernated" argument of
ohci_resume().

Signed-off-by: Guiting Shen 
Cc: stable 
Reviewed-by: Alan Stern 
Link: https://lore.kernel.org/r/20230626152713.18950-1-aarongt.shen@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: host: ohci-pxa27x: Fix and & vs | typo

2023-04-05T09:14:21+00:00

commit 0709831a50d31b3caf2237e8d7fe89e15b0d919d upstream.

The code is supposed to clear the RH_A_NPS and RH_A_PSM bits, but it's
a no-op because of the & vs | typo.  This bug predates git and it was
only discovered using static analysis so it must not affect too many
people in real life.

Signed-off-by: Dan Carpenter 
Acked-by: Alan Stern 
Link: https://lore.kernel.org/r/20190817065520.GA29951@mwanda
Signed-off-by: Nobuhiro Iwamatsu (CIP) 
Signed-off-by: Greg Kroah-Hartman

usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer math

2023-03-11T15:26:54+00:00

[ Upstream commit 0fbd2cda92cdb00f72080665554a586f88bca821 ]

Walking the dram->cs array was seen as accesses beyond the first array
item by the compiler. Instead, use the array index directly. This allows
for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen
with GCC 13 with -fstrict-flex-arrays:

In function 'xhci_mvebu_mbus_config',
    inlined from 'xhci_mvebu_mbus_init_quirk' at ../drivers/usb/host/xhci-mvebu.c:66:2:
../drivers/usb/host/xhci-mvebu.c:37:28: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=]
   37 |                 writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
      |                          ~~^~~~~~

Cc: Mathias Nyman 
Signed-off-by: Kees Cook 
Link: https://lore.kernel.org/r/20230204183651.never.663-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: host: xhci-plat: add wakeup entry at sysfs

2023-02-06T06:46:35+00:00

commit 4bb4fc0dbfa23acab9b762949b91ffd52106fe4b upstream.

With this change, there will be a wakeup entry at /sys/../power/wakeup,
and the user could use this entry to choose whether enable xhci wakeup
features (wake up system from suspend) or not.

Tested-by: Matthias Kaehlcke 
Reviewed-by: Matthias Kaehlcke 
Signed-off-by: Peter Chen 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20200918131752.16488-6-mathias.nyman@linux.intel.com
Signed-off-by: Florian Fainelli 
Signed-off-by: Greg Kroah-Hartman

usb: host: ehci-fsl: Fix module alias

2023-01-24T06:05:19+00:00

commit 5d3d01ae15d2f37ed0325c99ab47ef0ae5d05f3c upstream.

Commit ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent
driver module") changed DRV_NAME which was used for MODULE_ALIAS as well.
Starting from this the module alias didn't match the platform device
name created in fsl-mph-dr-of.c
Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of.
This is needed for module autoloading on ls1021a.

Fixes: ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module")
Cc: stable 
Signed-off-by: Alexander Stein 
Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman

usb: xhci: Check endpoint is valid before dereferencing it

2023-01-24T06:05:18+00:00

commit e8fb5bc76eb86437ab87002d4a36d6da02165654 upstream.

When the host controller is not responding, all URBs queued to all
endpoints need to be killed. This can cause a kernel panic if we
dereference an invalid endpoint.

Fix this by using xhci_get_virt_ep() helper to find the endpoint and
checking if the endpoint is valid before dereferencing it.

[233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead
[233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8

[233311.853964] pc : xhci_hc_died+0x10c/0x270
[233311.853971] lr : xhci_hc_died+0x1ac/0x270

[233311.854077] Call trace:
[233311.854085]  xhci_hc_died+0x10c/0x270
[233311.854093]  xhci_stop_endpoint_command_watchdog+0x100/0x1a4
[233311.854105]  call_timer_fn+0x50/0x2d4
[233311.854112]  expire_timers+0xac/0x2e4
[233311.854118]  run_timer_softirq+0x300/0xabc
[233311.854127]  __do_softirq+0x148/0x528
[233311.854135]  irq_exit+0x194/0x1a8
[233311.854143]  __handle_domain_irq+0x164/0x1d0
[233311.854149]  gic_handle_irq.22273+0x10c/0x188
[233311.854156]  el1_irq+0xfc/0x1a8
[233311.854175]  lpm_cpuidle_enter+0x25c/0x418 [msm_pm]
[233311.854185]  cpuidle_enter_state+0x1f0/0x764
[233311.854194]  do_idle+0x594/0x6ac
[233311.854201]  cpu_startup_entry+0x7c/0x80
[233311.854209]  secondary_start_kernel+0x170/0x198

Fixes: 50e8725e7c42 ("xhci: Refactor command watchdog and fix split string.")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Hu 
Signed-off-by: Mathias Nyman 
Message-ID: <0fe978ed-8269-9774-1c40-f8a98c17e838@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

xhci-pci: set the dma max_seg_size

2023-01-24T06:05:18+00:00

commit 93915a4170e9defd56a767a18e6c4076f3d18609 upstream.

Allow devices to have dma operations beyond 64K, and avoid warnings such
as:

xhci_hcd 0000:00:14.0: mapping sg segment longer than device claims to support [len=98304] [max=65536]

Cc: stable@vger.kernel.org
Cc: Takashi Iwai 
Signed-off-by: Ricardo Ribalda 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20230116142216.1141605-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

xhci: Remove device endpoints from bandwidth list when freeing the device

2022-11-03T14:50:52+00:00

commit 5aed5b7c2430ce318a8e62f752f181e66f0d1053 upstream.

Endpoints are normally deleted from the bandwidth list when they are
dropped, before the virt device is freed.

If xHC host is dying or being removed then the endpoints aren't dropped
cleanly due to functions returning early to avoid interacting with a
non-accessible host controller.

So check and delete endpoints that are still on the bandwidth list when
freeing the virt device.

Solves a list_del corruption kernel crash when unbinding xhci-pci,
caused by xhci_mem_cleanup() when it later tried to delete already freed
endpoints from the bandwidth list.

This only affects hosts that use software bandwidth checking, which
currenty is only the xHC in intel Panther Point PCH (Ivy Bridge)

Cc: stable@vger.kernel.org
Reported-by: Marek Marczykowski-Górecki 
Tested-by: Marek Marczykowski-Górecki 
Signed-off-by: Mathias Nyman 
Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman