linux-stable.git/drivers/usb/host, branch v4.10.2

usb: host: xhci: plat: check hcc_params after add hcd

2017-03-12T05:44:16+00:00

commit 5de4e1ea9a731cad195ce5152705c21daef3bbba upstream.

The commit 4ac53087d6d4 ("usb: xhci: plat: Create both
HCDs before adding them") move add hcd to the end of
probe, this cause hcc_params uninitiated, because xHCI
driver sets hcc_params in xhci_gen_setup() called from
usb_add_hcd().

This patch checks the Maximum Primary Stream Array Size
in the hcc_params register after add primary hcd.

Signed-off-by: William wu 
Acked-by: Roger Quadros 
Fixes: 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them")
Signed-off-by: Greg Kroah-Hartman

xhci: remove WARN_ON if dma mask is not set for platform devices

2017-01-20T13:55:20+00:00

The warn on is a bit too much, we will anyway set the dma mask if not set
previously.

The main reason for this fix is that 4.10-rc1  has a dwc3 change that
pass a parent sysdev dev pointer instead of setting the dma mask of
its xhci platform device. xhci platform driver can then get more
attributes from the sysdev than just the dma mask.

The usb core and xhci changes are not yet in 4.10, and a fix like
this was preferred instead of taking those big changes this late in
the rc-cycle.

Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

xhci: fix deadlock at host remove by running watchdog correctly

2017-01-11T15:52:13+00:00

If a URB is killed while the host is removed we can end up in a situation
where the hub thread takes the roothub device lock, and waits for
the URB to be given back by xhci-hcd, blocking the host remove code.

xhci-hcd tries to stop the endpoint and give back the urb, but can't
as the host is removed from PCI bus at the same time, preventing the normal
way of giving back urb.

Instead we need to rely on the stop command timeout function to give back
the urb. This xhci_stop_endpoint_command_watchdog() timeout function
used a XHCI_STATE_DYING flag to indicate if the timeout function is already
running, but later this flag has been taking into use in other places to
mark that xhci is dying.

Remove checks for XHCI_STATE_DYING in xhci_urb_dequeue. We are still
checking that reading from pci state does not return 0xffffffff or that
host is not halted before trying to stop the endpoint.

This whole area of stopping endpoints, giving back URBs, and the wathdog
timeout need rework, this fix focuses on solving a specific deadlock
issue that we can then send to stable before any major rework.

Cc: 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

usb: ohci-at91: use descriptor-based gpio APIs correctly

2017-01-05T18:32:29+00:00

The gpiod_get* function family does not want the -gpio suffix.
Use devm_gpiod_get_index_optional instead of devm_gpiod_get_optional.
The descriptor based APIs handle active high/low automatically.
The vbus-gpios are output, request enable while getting the gpio.
Don't try to get any vbus-gpios for ports outside num-ports.

WTF? Big sigh.

Fixes: 054d4b7b577d ("usb: ohci-at91: Use descriptor-based gpio APIs")
Signed-off-by: Peter Rosin 
Signed-off-by: Greg Kroah-Hartman

usb: host: xhci: handle COMP_STOP from SETUP phase too

2017-01-03T16:37:32+00:00

Stop Endpoint command can come at any point and we
have no control of that. We should make sure to
handle COMP_STOP on SETUP phase as well, otherwise
urb->actual_length might be set to negative values
in some occasions such as below:

 urb->length = 4;
 build_control_transfer_td_for(urb, ep);

 					stop_endpoint(ep);

COMP_STOP:
	[...]
	urb->actual_length = urb->length - trb->length;

trb->length is 8 for SETUP stage (8 control request
bytes), so actual_length would be set to -4 in this
case.

While doing that, also make sure to use TRB_TYPE
field of the actual TRB instead of matching pointers
to figure out in which stage of the control transfer
we got our completion event.

Cc: 
Signed-off-by: Felipe Balbi 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Apollo Lake

2017-01-03T16:37:32+00:00

Intel Apollo Lake also requires XHCI_PME_STUCK_QUIRK.
Adding its PCI ID to quirk.

Cc: 
Signed-off-by: Wan Ahmad Zainie 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

xhci: Fix race related to abort operation

2017-01-03T16:37:32+00:00

Current abort operation has race.

    xhci_handle_command_timeout()
      xhci_abort_cmd_ring()
        xhci_write_64(CMD_RING_ABORT)
        xhci_handshake(5s)
	  do {
	    check CMD_RING_RUNNING
            udelay(1)
					 ...
					 COMP_CMD_ABORT event
					 COMP_CMD_STOP event
					 xhci_handle_stopped_cmd_ring()
					   restart cmd_ring
                                           CMD_RING_RUNNING become 1 again
	  } while ()
          return -ETIMEDOUT
        xhci_write_64(CMD_RING_ABORT)
        /* can abort random command */

To do abort operation correctly, we have to wait both of COMP_CMD_STOP
event and negation of CMD_RING_RUNNING.

But like above, while timeout handler is waiting negation of
CMD_RING_RUNNING, event handler can restart cmd_ring. So timeout
handler never be notice negation of CMD_RING_RUNNING, and retry of
CMD_RING_ABORT can abort random command (BTW, I guess retry of
CMD_RING_ABORT was workaround of this race).

To fix this race, this moves xhci_handle_stopped_cmd_ring() to
xhci_abort_cmd_ring().  And timeout handler waits COMP_CMD_STOP event.

At this point, timeout handler is owner of cmd_ring, and safely
restart cmd_ring by using xhci_handle_stopped_cmd_ring().

[FWIW, as bonus, this way would be easily extend to add CMD_RING_PAUSE
operation]

[locks edited as patch is rebased on other locking fixes -Mathias]
Signed-off-by: OGAWA Hirofumi 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

xhci: Use delayed_work instead of timer for command timeout

2017-01-03T16:37:32+00:00

This is preparation to fix abort operation race (See "xhci: Fix race
related to abort operation"). To make timeout sleepable, use
delayed_work instead of timer.

[change a newly added pending timer fix to pending work -Mathias]
Signed-off-by: OGAWA Hirofumi 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

usb: xhci: hold lock over xhci_abort_cmd_ring()

2017-01-03T16:37:32+00:00

In command timer function, xhci_handle_command_timeout(), xhci->lock
is unlocked before call into xhci_abort_cmd_ring(). This might cause
race between the timer function and the event handler.

The xhci_abort_cmd_ring() function sets the CMD_RING_ABORT bit in the
command register and polling it until the setting takes effect. A stop
command ring event might be handled between writing the abort bit and
polling for it. The event handler will restart the command ring, which
causes the failure of polling, and we ever believed that we failed to
stop it.

As a bonus, this also fixes some issues of calling functions without
locking in xhci_handle_command_timeout().

Cc:  # 3.7+
Signed-off-by: Lu Baolu 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

xhci: Handle command completion and timeout race

2017-01-03T16:37:32+00:00

If we get a command completion event at the same time as the command
timeout work starts on another cpu we might end up aborting the wrong
command.

If the command completion takes the xhci lock before the timeout work, it
will handle the command, pick the next command, mark it as current_cmd, and
re-queue the timeout work. When the timeout work finally gets the lock
It will start aborting the wrong command.

This case can be resolved by checking if the timeout work is pending inside
the timeout function itself. A new timeout work can only be pending if the
command completed and a new command was queued.

If there are no more commands pending then command completion will set
the current_cmd to NULL, which is already handled in the timeout work.

Cc: 
Reported-by: Baolin Wang 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman