linux-stable.git/drivers/usb/host, branch v3.2.91 Linux kernel stable tree xhci: Manually give back cancelled URB if we can't queue it for cancel 2017-07-18T17:38:38+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2017-03-28T12:55:30+00:00 a61f12b532e9dcf20e7a4a4a4daf3d8efdc9ff8f commit d3519b9d9606991a1305596348b6d690bfa3eb27 upstream. xhci needs to take care of four scenarios when asked to cancel a URB. 1 URB is not queued or already given back. usb_hcd_check_unlink_urb() will return an error, we pass the error on 2 We fail to find xhci internal structures from urb private data such as virtual device and endpoint ring. Give back URB immediately, can't do anything about internal structures. 3 URB private data has valid pointers to xhci internal data, but host is not responding. give back URB immedately and remove the URB from the endpoint lists. 4 Everyting is working add URB to cancel list, queue a command to stop the endpoint, after which the URB can be turned to no-op or skipped, removed from lists, and given back. We failed to give back the urb in case 2 where the correct device and endpoint pointers could not be retrieved from URB private data. This caused a hang on Dell Inspiron 5558/0VNM2T at resume from suspend as urb was never returned. [ 245.270505] INFO: task rtsx_usb_ms_1:254 blocked for more than 120 seconds. [ 245.272244] Tainted: G W 4.11.0-rc3-ARCH #2 [ 245.273983] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 245.275737] rtsx_usb_ms_1 D 0 254 2 0x00000000 [ 245.277524] Call Trace: [ 245.279278] __schedule+0x2d3/0x8a0 [ 245.281077] schedule+0x3d/0x90 [ 245.281961] usb_kill_urb.part.3+0x6c/0xa0 [usbcore] [ 245.282861] ? wake_atomic_t_function+0x60/0x60 [ 245.283760] usb_kill_urb+0x21/0x30 [usbcore] [ 245.284649] usb_start_wait_urb+0xe5/0x170 [usbcore] [ 245.285541] ? try_to_del_timer_sync+0x53/0x80 [ 245.286434] usb_bulk_msg+0xbd/0x160 [usbcore] [ 245.287326] rtsx_usb_send_cmd+0x63/0x90 [rtsx_usb] Reported-by: diego.viola@gmail.com Tested-by: diego.viola@gmail.com Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - Move debug logging along with endpoint lookup - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit d3519b9d9606991a1305596348b6d690bfa3eb27 upstream.

xhci needs to take care of four scenarios when asked to cancel a URB.

1 URB is not queued or already given back.
  usb_hcd_check_unlink_urb() will return an error, we pass the error on

2 We fail to find xhci internal structures from urb private data such as
  virtual device and endpoint ring.
  Give back URB immediately, can't do anything about internal structures.

3 URB private data has valid pointers to xhci internal data, but host is
  not  responding.
  give back URB immedately and remove the URB from the endpoint lists.

4 Everyting is working
  add URB to cancel list, queue a command to stop the endpoint, after
  which the URB can be turned to no-op or skipped, removed from lists,
  and given back.

We failed to give back the urb in case 2 where the correct device and
endpoint pointers could not be retrieved from URB private data.

This caused a hang on Dell Inspiron 5558/0VNM2T at resume from suspend
as urb was never returned.

[  245.270505] INFO: task rtsx_usb_ms_1:254 blocked for more than 120 seconds.
[  245.272244]       Tainted: G        W       4.11.0-rc3-ARCH #2
[  245.273983] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  245.275737] rtsx_usb_ms_1   D    0   254      2 0x00000000
[  245.277524] Call Trace:
[  245.279278]  __schedule+0x2d3/0x8a0
[  245.281077]  schedule+0x3d/0x90
[  245.281961]  usb_kill_urb.part.3+0x6c/0xa0 [usbcore]
[  245.282861]  ? wake_atomic_t_function+0x60/0x60
[  245.283760]  usb_kill_urb+0x21/0x30 [usbcore]
[  245.284649]  usb_start_wait_urb+0xe5/0x170 [usbcore]
[  245.285541]  ? try_to_del_timer_sync+0x53/0x80
[  245.286434]  usb_bulk_msg+0xbd/0x160 [usbcore]
[  245.287326]  rtsx_usb_send_cmd+0x63/0x90 [rtsx_usb]

Reported-by: diego.viola@gmail.com
Tested-by: diego.viola@gmail.com
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Move debug logging along with endpoint lookup
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: fix deadlock at host remove by running watchdog correctly 2017-03-16T02:18:43+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2017-01-11T15:10:34+00:00 9fcd0da449244a12271e75c47e025d1cebecc866 commit d6169d04097fd9ddf811e63eae4e5cd71e6666e2 upstream. If a URB is killed while the host is removed we can end up in a situation where the hub thread takes the roothub device lock, and waits for the URB to be given back by xhci-hcd, blocking the host remove code. xhci-hcd tries to stop the endpoint and give back the urb, but can't as the host is removed from PCI bus at the same time, preventing the normal way of giving back urb. Instead we need to rely on the stop command timeout function to give back the urb. This xhci_stop_endpoint_command_watchdog() timeout function used a XHCI_STATE_DYING flag to indicate if the timeout function is already running, but later this flag has been taking into use in other places to mark that xhci is dying. Remove checks for XHCI_STATE_DYING in xhci_urb_dequeue. We are still checking that reading from pci state does not return 0xffffffff or that host is not halted before trying to stop the endpoint. This whole area of stopping endpoints, giving back URBs, and the wathdog timeout need rework, this fix focuses on solving a specific deadlock issue that we can then send to stable before any major rework. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: the checks look slightly different] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit d6169d04097fd9ddf811e63eae4e5cd71e6666e2 upstream.

If a URB is killed while the host is removed we can end up in a situation
where the hub thread takes the roothub device lock, and waits for
the URB to be given back by xhci-hcd, blocking the host remove code.

xhci-hcd tries to stop the endpoint and give back the urb, but can't
as the host is removed from PCI bus at the same time, preventing the normal
way of giving back urb.

Instead we need to rely on the stop command timeout function to give back
the urb. This xhci_stop_endpoint_command_watchdog() timeout function
used a XHCI_STATE_DYING flag to indicate if the timeout function is already
running, but later this flag has been taking into use in other places to
mark that xhci is dying.

Remove checks for XHCI_STATE_DYING in xhci_urb_dequeue. We are still
checking that reading from pci state does not return 0xffffffff or that
host is not halted before trying to stop the endpoint.

This whole area of stopping endpoints, giving back URBs, and the wathdog
timeout need rework, this fix focuses on solving a specific deadlock
issue that we can then send to stable before any major rework.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: the checks look slightly different]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: free xhci virtual devices with leaf nodes first 2017-03-16T02:18:35+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2017-01-03T16:28:43+00:00 7fcebcb8922e2307b4289cf2cdab3fac49d3cec4 commit ee8665e28e8d90ce69d4abe5a469c14a8707ae0e upstream. the tt_info provided by a HS hub might be in use to by a child device Make sure we free the devices in the correct order. This is needed in special cases such as when xhci controller is reset when resuming from hibernate, and all virt_devices are freed. Also free the virt_devices starting from max slot_id as children more commonly have higher slot_id than parent. Reported-by: Guenter Roeck <groeck@chromium.org> Tested-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit ee8665e28e8d90ce69d4abe5a469c14a8707ae0e upstream.

the tt_info provided by a HS hub might be in use to by a child device
Make sure we free the devices in the correct order.

This is needed in special cases such as when xhci controller is
reset when resuming from hibernate, and all virt_devices are freed.

Also free the virt_devices starting from max slot_id as children
more commonly have higher slot_id than parent.

Reported-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: xhci-mem: use passed in GFP flags instead of GFP_KERNEL 2017-03-16T02:18:25+00:00 Dan Carpenter dan.carpenter@oracle.com 2016-11-10T19:33:17+00:00 b5bc5cbc7fb9a0b47038bd06cd4c197a4d4ecd56 commit c95a9f83711bf53faeb4ed9bbb63a3f065613dfb upstream. We normally use the passed in gfp flags for allocations, it's just these two which were missed. Fixes: 22d45f01a836 ("usb/xhci: replace pci_*_consistent() with dma_*_coherent()") Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit c95a9f83711bf53faeb4ed9bbb63a3f065613dfb upstream.

We normally use the passed in gfp flags for allocations, it's just these
two which were missed.

Fixes: 22d45f01a836 ("usb/xhci: replace pci_*_consistent() with dma_*_coherent()")
Cc: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: UHCI: report non-PME wakeup signalling for Intel hardware 2017-03-16T02:18:25+00:00 Alan Stern stern@rowland.harvard.edu 2016-10-21T20:49:07+00:00 ac5c43f9639cb9f5a542b8f3d3f9f37755326d72 commit ccdb6be9ec6580ef69f68949ebe26e0fb58a6fb0 upstream. The UHCI controllers in Intel chipsets rely on a platform-specific non-PME mechanism for wakeup signalling. They can generate wakeup signals even though they don't support PME. We need to let the USB core know this so that it will enable runtime suspend for UHCI controllers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit ccdb6be9ec6580ef69f68949ebe26e0fb58a6fb0 upstream.

The UHCI controllers in Intel chipsets rely on a platform-specific non-PME
mechanism for wakeup signalling.  They can generate wakeup signals even
though they don't support PME.

We need to let the USB core know this so that it will enable runtime
suspend for UHCI controllers.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: add restart quirk for Intel Wildcatpoint PCH 2017-02-23T03:50:54+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2016-10-20T15:09:18+00:00 bde40aa4b0b7318fd6c76ea29fc918cbcee6747a commit 4c39135aa412d2f1381e43802523da110ca7855c upstream. xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the same quirks to prevent machines from spurious restart while shutting them down. Reported-by: Hasan Mahmood <hasan.mahm@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 4c39135aa412d2f1381e43802523da110ca7855c upstream.

xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the
same quirks to prevent machines from spurious restart while
shutting them down.

Reported-by: Hasan Mahmood <hasan.mahm@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: don't dereference a xhci member after removing xhci 2016-11-20T01:01:33+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2016-08-16T07:18:06+00:00 a9d438ce4d098d5924338053eed443f4e5036c97 commit f1f6d9a8b540df22b87a5bf6bc104edaade81f47 upstream. Remove the hcd after checking for the xhci last quirks, not before. This caused a hang on a Alpine Ridge xhci based maching which remove the whole xhci controller when unplugging the last usb device Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit f1f6d9a8b540df22b87a5bf6bc104edaade81f47 upstream.

Remove the hcd after checking for the xhci last quirks, not before.

This caused a hang on a Alpine Ridge xhci based maching which remove
the whole xhci controller when unplugging the last usb device

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: xhci: Fix panic if disconnect 2016-11-20T01:01:33+00:00 Jim Lin jilin@nvidia.com 2016-08-16T07:18:05+00:00 c8714b29157d534ac0078541c4075211f287afdb commit 88716a93766b8f095cdef37a8e8f2c93aa233b21 upstream. After a device is disconnected, xhci_stop_device() will be invoked in xhci_bus_suspend(). Also the "disconnect" IRQ will have ISR to invoke xhci_free_virt_device() in this sequence. xhci_irq -> xhci_handle_event -> handle_cmd_completion -> xhci_handle_cmd_disable_slot -> xhci_free_virt_device If xhci->devs[slot_id] has been assigned to NULL in xhci_free_virt_device(), then virt_dev->eps[i].ring in xhci_stop_device() may point to an invlid address to cause kernel panic. virt_dev = xhci->devs[slot_id]; : if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) [] Unable to handle kernel paging request at virtual address 00001a68 [] pgd=ffffffc001430000 [] [00001a68] *pgd=000000013c807003, *pud=000000013c807003, *pmd=000000013c808003, *pte=0000000000000000 [] Internal error: Oops: 96000006 [#1] PREEMPT SMP [] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G U [] Workqueue: pm pm_runtime_work [] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti: ffffffc0bc0ec000 [] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4 This issue is found when running with realtek ethernet device (0bda:8153). Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 88716a93766b8f095cdef37a8e8f2c93aa233b21 upstream.

After a device is disconnected, xhci_stop_device() will be invoked
in xhci_bus_suspend().
Also the "disconnect" IRQ will have ISR to invoke
xhci_free_virt_device() in this sequence.
xhci_irq -> xhci_handle_event -> handle_cmd_completion ->
xhci_handle_cmd_disable_slot -> xhci_free_virt_device

If xhci->devs[slot_id] has been assigned to NULL in
xhci_free_virt_device(), then virt_dev->eps[i].ring in
xhci_stop_device() may point to an invlid address to cause kernel
panic.

virt_dev = xhci->devs[slot_id];
:
if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)

[] Unable to handle kernel paging request at virtual address 00001a68
[] pgd=ffffffc001430000
[] [00001a68] *pgd=000000013c807003, *pud=000000013c807003,
*pmd=000000013c808003, *pte=0000000000000000
[] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G     U
[] Workqueue: pm pm_runtime_work
[] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti:
ffffffc0bc0ec000
[] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4

This issue is found when running with realtek ethernet device
(0bda:8153).

Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: xhci: fix wild pointers in xhci_mem_cleanup 2016-06-15T20:28:11+00:00 Lu Baolu baolu.lu@linux.intel.com 2016-04-08T13:25:09+00:00 1972444b707d53dda2b5cf32bfc955b11cd0a529 commit 71504062a7c34838c3fccd92c447f399d3cb5797 upstream. This patch fixes some wild pointers produced by xhci_mem_cleanup. These wild pointers will cause system crash if xhci_mem_cleanup() is called twice. Reported-and-tested-by: Pengcheng Li <lpc.li@hisilicon.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: there's no xhci_hcd::ext_caps field to clear] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 71504062a7c34838c3fccd92c447f399d3cb5797 upstream.

This patch fixes some wild pointers produced by xhci_mem_cleanup.
These wild pointers will cause system crash if xhci_mem_cleanup()
is called twice.

Reported-and-tested-by: Pengcheng Li <lpc.li@hisilicon.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: there's no xhci_hcd::ext_caps field to clear]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host 2016-06-15T20:28:11+00:00 Rafal Redzimski rafal.f.redzimski@intel.com 2016-04-08T13:25:05+00:00 99c3593026995d69b3e89a6c48a64395a0f08c1a commit 0d46faca6f887a849efb07c1655b5a9f7c288b45 upstream. Broxton B0 also requires XHCI_PME_STUCK_QUIRK. Adding PCI device ID for Broxton B and adding to quirk. Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 0d46faca6f887a849efb07c1655b5a9f7c288b45 upstream.

Broxton B0 also requires XHCI_PME_STUCK_QUIRK.
Adding PCI device ID for Broxton B and adding to quirk.

Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>