linux-stable.git/drivers/usb/host, branch v3.2.72 Linux kernel stable tree xhci: change xhci 1.0 only restrictions to support xhci 1.1 2015-10-13T02:46:10+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2015-09-21T14:46:16+00:00 e35c94fa99e6bc40d9e32765333bc8329c111c81 commit dca7794539eff04b786fb6907186989e5eaaa9c2 upstream. Some changes between xhci 0.96 and xhci 1.0 specifications forced us to check the hci version in code, some of these checks were implemented as hci_version == 1.0, which will not work with new xhci 1.1 controllers. xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these checks to hci_version >= 1.0 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit dca7794539eff04b786fb6907186989e5eaaa9c2 upstream.

Some changes between xhci 0.96 and xhci 1.0 specifications forced us to
check the hci version in code, some of these checks were implemented as
hci_version == 1.0, which will not work with new xhci 1.1 controllers.

xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these
checks to hci_version >= 1.0

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: xhci: Clear XHCI_STATE_DYING on start 2015-10-13T02:46:10+00:00 Roger Quadros rogerq@ti.com 2015-09-21T14:46:13+00:00 88069fda208601be508fa1740919198bfef601a7 commit e5bfeab0ad515b4f6df39fe716603e9dc6d3dfd0 upstream. For whatever reason if XHCI died in the previous instant then it will never recover on the next xhci_start unless we clear the DYING flag. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit e5bfeab0ad515b4f6df39fe716603e9dc6d3dfd0 upstream.

For whatever reason if XHCI died in the previous instant
then it will never recover on the next xhci_start unless we
clear the DYING flag.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: give command abortion one more chance before killing xhci 2015-10-13T02:46:10+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2015-09-21T14:46:10+00:00 cce88b8251adf0d44733464703604dcb62ab38c3 commit a6809ffd1687b3a8c192960e69add559b9d32649 upstream. We want to give the command abortion an additional try to stop the command ring before we completely hose xhci. Tested-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: call handshake() rather than xhci_handshake()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit a6809ffd1687b3a8c192960e69add559b9d32649 upstream.

We want to give the command abortion an additional try to stop
the command ring before we completely hose xhci.

Tested-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: call handshake() rather than xhci_handshake()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: host: ehci-sys: delete useless bus_to_hcd conversion 2015-10-13T02:46:06+00:00 Peter Chen peter.chen@freescale.com 2015-08-17T02:23:03+00:00 586491f5bed09e099499642b3ad3ffdbe6f240b5 commit 0521cfd06e1ebcd575e7ae36aab068b38df23850 upstream. The ehci platform device's drvdata is the pointer of struct usb_hcd already, so we doesn't need to call bus_to_hcd conversion again. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: Unfortunately some EHCI platform sub-drivers point drvdata to a private structure, so only create and remove the attributes if drvdata has been set as expected.] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 0521cfd06e1ebcd575e7ae36aab068b38df23850 upstream.

The ehci platform device's drvdata is the pointer of struct usb_hcd
already, so we doesn't need to call bus_to_hcd conversion again.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: Unfortunately some EHCI platform sub-drivers 
 point drvdata to a private structure, so only create and remove the
 attributes if drvdata has been set as expected.]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
drivers: usb: fsl: Workaround for USB erratum-A005275 2015-10-13T02:46:05+00:00 Nikhil Badola nikhil.badola@freescale.com 2015-08-06T09:21:27+00:00 79fcb25fc499554d030d562c33a6f1adc72c2ebd commit f8786a91548df6930643a052e40e5c0b7a8403a5 upstream. Incoming packets in high speed are randomly corrupted by h/w resulting in multiple errors. This workaround makes FS as default mode in all affected socs by disabling HS chirp signalling.This errata does not affect FS and LS mode. Forces all HS devices to connect in FS mode for all socs affected by this erratum: P3041 and P2041 rev 1.0 and 1.1 P5020 and P5010 rev 1.0 and 2.0 P5040, P1010 and T4240 rev 1.0 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit f8786a91548df6930643a052e40e5c0b7a8403a5 upstream.

Incoming packets in high speed are randomly corrupted by h/w
resulting in multiple errors. This workaround makes FS as
default mode in all affected socs by disabling HS chirp
signalling.This errata does not affect FS and LS mode.

Forces all HS devices to connect in FS mode for all socs
affected by this erratum:
P3041 and P2041 rev 1.0 and 1.1
P5020 and P5010 rev 1.0 and 2.0
P5040, P1010 and T4240 rev 1.0

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: fix off by one error in TRB DMA address boundary check 2015-10-13T02:46:01+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2015-08-03T13:07:48+00:00 6e3ae6256145b5597bee0296eb5fc384cd86aa3d commit 7895086afde2a05fa24a0e410d8e6b75ca7c8fdd upstream. We need to check that a TRB is part of the current segment before calculating its DMA address. Previously a ring segment didn't use a full memory page, and every new ring segment got a new memory page, so the off by one error in checking the upper bound was never seen. Now that we use a full memory page, 256 TRBs (4096 bytes), the off by one didn't catch the case when a TRB was the first element of the next segment. This is triggered if the virtual memory pages for a ring segment are next to each in increasing order where the ring buffer wraps around and causes errors like: [ 106.398223] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 0 comp_code 1 [ 106.398230] xhci_hcd 0000:00:14.0: Looking for event-dma fffd3000 trb-start fffd4fd0 trb-end fffd5000 seg-start fffd4000 seg-end fffd4ff0 The trb-end address is one outside the end-seg address. Tested-by: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 7895086afde2a05fa24a0e410d8e6b75ca7c8fdd upstream.

We need to check that a TRB is part of the current segment
before calculating its DMA address.

Previously a ring segment didn't use a full memory page, and every
new ring segment got a new memory page, so the off by one
error in checking the upper bound was never seen.

Now that we use a full memory page, 256 TRBs (4096 bytes), the off by one
didn't catch the case when a TRB was the first element of the next segment.

This is triggered if the virtual memory pages for a ring segment are
next to each in increasing order where the ring buffer wraps around and
causes errors like:

[  106.398223] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 0 comp_code 1
[  106.398230] xhci_hcd 0000:00:14.0: Looking for event-dma fffd3000 trb-start fffd4fd0 trb-end fffd5000 seg-start fffd4000 seg-end fffd4ff0

The trb-end address is one outside the end-seg address.

Tested-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: do not report PLC when link is in internal resume state 2015-08-12T14:33:23+00:00 Zhuang Jin Can jin.can.zhuang@intel.com 2015-07-21T14:20:31+00:00 6db7fe2b119d350fbe755e8f0babb51638f6fc85 commit aca3a0489ac019b58cf32794d5362bb284cb9b94 upstream. Port link change with port in resume state should not be reported to usbcore, as this is an internal state to be handled by xhci driver. Reporting PLC to usbcore may cause usbcore clearing PLC first and port change event irq won't be generated. Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - Adjust indentation - s/raw_port_status/temp/] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit aca3a0489ac019b58cf32794d5362bb284cb9b94 upstream.

Port link change with port in resume state should not be
reported to usbcore, as this is an internal state to be
handled by xhci driver. Reporting PLC to usbcore may
cause usbcore clearing PLC first and port change event irq
won't be generated.

Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Adjust indentation
 - s/raw_port_status/temp/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: report U3 when link is in resume state 2015-08-12T14:33:23+00:00 Zhuang Jin Can jin.can.zhuang@intel.com 2015-07-21T14:20:29+00:00 dca8f172a6116fca13321e83aad7f90154dc538e commit 243292a2ad3dc365849b820a64868927168894ac upstream. xhci_hub_report_usb3_link_state() returns pls as U0 when the link is in resume state, and this causes usb core to think the link is in U0 while actually it's in resume state. When usb core transfers control request on the link, it fails with TRB error as the link is not ready for transfer. To fix the issue, report U3 when the link is in resume state, thus usb core knows the link it's not ready for transfer. Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 243292a2ad3dc365849b820a64868927168894ac upstream.

xhci_hub_report_usb3_link_state() returns pls as U0 when the link
is in resume state, and this causes usb core to think the link is in
U0 while actually it's in resume state. When usb core transfers
control request on the link, it fails with TRB error as the link
is not ready for transfer.

To fix the issue, report U3 when the link is in resume state, thus
usb core knows the link it's not ready for transfer.

Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: Calculate old endpoints correctly on device reset 2015-08-12T14:33:22+00:00 Brian Campbell bacam@z273.org.uk 2015-07-21T14:20:28+00:00 35d4cd24c5defd0689e7b51b780ea41a9a37b8b8 commit 326124a027abc9a7f43f72dc94f6f0f7a55b02b3 upstream. When resetting a device the number of active TTs may need to be corrected by xhci_update_tt_active_eps, but the number of old active endpoints supplied to it was always zero, so the number of TTs and the bandwidth reserved for them was not updated, and could rise unnecessarily. This affected systems using Intel's Patherpoint chipset, which rely on software bandwidth checking. For example, a Lenovo X230 would lose the ability to use ports on the docking station after enough suspend/resume cycles because the bandwidth calculated would rise with every cycle when a suitable device is attached. The correct number of active endpoints is calculated in the same way as in xhci_reserve_bandwidth. Signed-off-by: Brian Campbell <bacam@z273.org.uk> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 326124a027abc9a7f43f72dc94f6f0f7a55b02b3 upstream.

When resetting a device the number of active TTs may need to be
corrected by xhci_update_tt_active_eps, but the number of old active
endpoints supplied to it was always zero, so the number of TTs and the
bandwidth reserved for them was not updated, and could rise
unnecessarily.

This affected systems using Intel's Patherpoint chipset, which rely on
software bandwidth checking.  For example, a Lenovo X230 would lose the
ability to use ports on the docking station after enough suspend/resume
cycles because the bandwidth calculated would rise with every cycle when
a suitable device is attached.

The correct number of active endpoints is calculated in the same way as
in xhci_reserve_bandwidth.

Signed-off-by: Brian Campbell <bacam@z273.org.uk>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() function 2015-08-12T14:33:22+00:00 AMAN DEEP aman.deep@samsung.com 2015-07-21T14:20:27+00:00 40e09def7acb51c3db71974bd36a78683a1fdd14 commit 3496810663922617d4b706ef2780c279252ddd6a upstream. virt_dev->num_cached_rings counts on freed ring and is not updated correctly. In xhci_free_or_cache_endpoint_ring() function, the free ring is added into cache and then num_rings_cache is incremented as below: virt_dev->ring_cache[rings_cached] = virt_dev->eps[ep_index].ring; virt_dev->num_rings_cached++; here, free ring pointer is added to a current index and then index is incremented. So current index always points to empty location in the ring cache. For getting available free ring, current index should be decremented first and then corresponding ring buffer value should be taken from ring cache. But In function xhci_endpoint_init(), the num_rings_cached index is accessed before decrement. virt_dev->eps[ep_index].new_ring = virt_dev->ring_cache[virt_dev->num_rings_cached]; virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL; virt_dev->num_rings_cached--; This is bug in manipulating the index of ring cache. And it should be as below: virt_dev->num_rings_cached--; virt_dev->eps[ep_index].new_ring = virt_dev->ring_cache[virt_dev->num_rings_cached]; virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL; Signed-off-by: Aman Deep <aman.deep@samsung.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 3496810663922617d4b706ef2780c279252ddd6a upstream.

virt_dev->num_cached_rings counts on freed ring and is not updated
correctly. In xhci_free_or_cache_endpoint_ring() function, the free ring
is added into cache and then num_rings_cache is incremented as below:
		virt_dev->ring_cache[rings_cached] =
			virt_dev->eps[ep_index].ring;
		virt_dev->num_rings_cached++;
here, free ring pointer is added to a current index and then
index is incremented.
So current index always points to empty location in the ring cache.
For getting available free ring, current index should be decremented
first and then corresponding ring buffer value should be taken from ring
cache.

But In function xhci_endpoint_init(), the num_rings_cached index is
accessed before decrement.
		virt_dev->eps[ep_index].new_ring =
			virt_dev->ring_cache[virt_dev->num_rings_cached];
		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
		virt_dev->num_rings_cached--;
This is bug in manipulating the index of ring cache.
And it should be as below:
		virt_dev->num_rings_cached--;
		virt_dev->eps[ep_index].new_ring =
			virt_dev->ring_cache[virt_dev->num_rings_cached];
		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;

Signed-off-by: Aman Deep <aman.deep@samsung.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>