linux-stable.git/drivers/usb/host, branch v3.2.64

xhci: Fix null pointer dereference if xhci initialization fails

2014-11-05T20:27:42+00:00

commit c207e7c50f31113c24a9f536fcab1e8a256985d7 upstream.

If xhci initialization fails before the roothub bandwidth
domains (xhci->rh_bw[i]) are allocated it will oops when
trying to access rh_bw members in xhci_mem_cleanup().

Reported-by: Manuel Reimer 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

usb: host: xhci: fix compliance mode workaround

2014-11-05T20:27:41+00:00

commit 96908589a8b2584b1185f834d365f5cc360e8226 upstream.

Commit 71c731a (usb: host: xhci: Fix Compliance Mode
on SN65LVP3502CP Hardware) implemented a workaround
for a known issue with Texas Instruments' USB 3.0
redriver IC but it left a condition where any xHCI
host would be taken out of reset if port was placed
in compliance mode and there was no device connected
to the port.

That condition would trigger a fake connection to a
non-existent device so that usbcore would trigger a
warm reset of the port, thus taking the link out of
reset.

This has the side-effect of preventing any xHCI host
connected to a Linux machine from starting and running
the USB 3.0 Electrical Compliance Suite because the
port will mysteriously taken out of compliance mode
and, thus, xHCI won't step through the necessary
compliance patterns for link validation.

This patch fixes the issue by just adding a missing
check for XHCI_COMP_MODE_QUIRK inside
xhci_hub_report_usb3_link_state() when PORT_CAS isn't
set.

This patch should be backported to all kernels containing
commit 71c731a.

Fixes: 71c731a (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware)
Cc: Alexis R. Cortes 
Signed-off-by: Felipe Balbi 
Acked-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2:
 - s/xhci_hub_report_usb3_link_state/xhci_hub_report_link_state/
 - s/raw_port_status/temp/
 - Adjust indentation]
Signed-off-by: Ben Hutchings

xhci: rework cycle bit checking for new dequeue pointers

2014-09-13T22:41:46+00:00

commit 365038d83313951d6ace15342eb24624bbef1666 upstream.

When we manually need to move the TR dequeue pointer we need to set the
correct cycle bit as well. Previously we used the trb pointer from the
last event received as a base, but this was changed in
commit 1f81b6d22a59 ("usb: xhci: Prefer endpoint context dequeue pointer")
to use the dequeue pointer from the endpoint context instead

It turns out some Asmedia controllers advance the dequeue pointer
stored in the endpoint context past the event triggering TRB, and
this messed up the way the cycle bit was calculated.

Instead of adding a quirk or complicating the already hard to follow cycle bit
code, the whole cycle bit calculation is now simplified and adapted to handle
event and endpoint context dequeue pointer differences.

Fixes: 1f81b6d22a59 ("usb: xhci: Prefer endpoint context dequeue pointer")
Reported-by: Maciej Puzio 
Reported-by: Evan Langlois 
Reviewed-by: Julius Werner 
Tested-by: Maciej Puzio 
Tested-by: Evan Langlois 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2:
 - Debug logging in xhci_find_new_dequeue_state() is slightly different
 - Don't delete find_trb_seg(); it's still needed by xhci_cmd_to_noop()]
Signed-off-by: Ben Hutchings

usb: xhci: amd chipset also needs short TX quirk

2014-09-13T22:41:46+00:00

commit 2597fe99bb0259387111d0431691f5daac84f5a5 upstream.

AMD xHC also needs short tx quirk after tested on most of chipset
generations. That's because there is the same incorrect behavior like
Fresco Logic host. Please see below message with on USB webcam
attached on xHC host:

[  139.262944] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.266934] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.270913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.274937] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.278914] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.282936] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.286915] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.290938] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.294913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.298917] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?

Reported-by: Arindam Nath 
Tested-by: Shriraj-Rai P 
Signed-off-by: Huang Rui 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

xhci: Treat not finding the event_seg on COMP_STOP the same as COMP_STOP_INVAL

2014-09-13T22:41:46+00:00

commit 9a54886342e227433aebc9d374f8ae268a836475 upstream.

When using a Renesas uPD720231 chipset usb-3 uas to sata bridge with a 120G
Crucial M500 ssd, model string: Crucial_ CT120M500SSD1, together with a
the integrated Intel xhci controller on a Haswell laptop:

00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04)

The following error gets logged to dmesg:

xhci error: Transfer event TRB DMA ptr not part of current TD

Treating COMP_STOP the same as COMP_STOP_INVAL when no event_seg gets found
fixes this.

Signed-off-by: Hans de Goede 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: OHCI: don't lose track of EDs when a controller dies

2014-09-13T22:41:38+00:00

commit 977dcfdc60311e7aa571cabf6f39c36dde13339e upstream.

This patch fixes a bug in ohci-hcd.  When an URB is unlinked, the
corresponding Endpoint Descriptor is added to the ed_rm_list and taken
off the hardware schedule.  Once the ED is no longer visible to the
hardware, finish_unlinks() handles the URBs that were unlinked or have
completed.  If any URBs remain attached to the ED, the ED is added
back to the hardware schedule -- but only if the controller is
running.

This fails when a controller dies.  A non-empty ED does not get added
back to the hardware schedule and does not remain on the ed_rm_list;
ohci-hcd loses track of it.  The remaining URBs cannot be unlinked,
which causes the USB stack to hang.

The patch changes finish_unlinks() so that non-empty EDs remain on
the ed_rm_list if the controller isn't running.  This requires moving
some of the existing code around, to avoid modifying the ED's hardware
fields more than once.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: keep using HC_IS_RUNNING()]
Signed-off-by: Ben Hutchings

xhci: Fix runtime suspended xhci from blocking system suspend.

2014-08-06T17:07:32+00:00

commit d6236f6d1d885aa19d1cd7317346fe795227a3cc upstream.

The system suspend flow as following:
1, Freeze all user processes and kenrel threads.

2, Try to suspend all devices.

2.1, If pci device is in RPM suspended state, then pci driver will try
to resume it to RPM active state in the prepare stage.

2.2, xhci_resume function calls usb_hcd_resume_root_hub to queue two
workqueue items to resume usb2&usb3 roothub devices.

2.3, Call suspend callbacks of devices.

2.3.1, All suspend callbacks of all hcd's children, including
roothub devices are called.

2.3.2, Finally, hcd_pci_suspend callback is called.

Due to workqueue threads were already frozen in step 1, the workqueue
items can't be scheduled, and the roothub devices can't be resumed in
this flow. The HCD_FLAG_WAKEUP_PENDING flag which is set in
usb_hcd_resume_root_hub won't be cleared. Finally,
hcd_pci_suspend will return -EBUSY, and system suspend fails.

The reason why this issue doesn't show up very often is due to that
choose_wakeup will be called in step 2.3.1. In step 2.3.1, if
udev->do_remote_wakeup is not equal to device_may_wakeup(&udev->dev), then
udev will resume to RPM active for changing the wakeup settings. This
has been a lucky hit which hides this issue.

For some special xHCI controllers which have no USB2 port, then roothub
will not match hub driver due to probe failed. Then its
do_remote_wakeup will be set to zero, and we won't be as lucky.

xhci driver doesn't need to resume roothub devices everytime like in
the above case. It's only needed when there are pending event TRBs.

This patch should be back-ported to kernels as old as 3.2, that
contains the commit f69e3120df82391a0ee8118e0a156239a06b2afb
"USB: XHCI: resume root hubs when the controller resumes"

Signed-off-by: Wang, Yu 
Acked-by: Alan Stern 
[use readl() instead of removed xhci_readl(), reword commit message -Mathias]
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

xhci: clear root port wake on bits if controller isn't wake-up capable

2014-08-06T17:07:32+00:00

commit ff8cbf250b448aac35589f6075082c3fcad8a8fe upstream.

When xHCI PCI host is suspended, if do_wakeup is false in xhci_pci_suspend,
xhci_bus_suspend needs to clear all root port wake on bits. Otherwise some Intel
platforms may get a spurious wakeup, even if PCI PME# is disabled.

This patch should be back-ported to kernels as old as 2.6.37, that
contains the commit 9777e3ce907d4cb5a513902a87ecd03b52499569
"USB: xHCI: bus power management implementation".

Signed-off-by: Lu Baolu 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

xhci: correct burst count field for isoc transfers on 1.0 xhci hosts

2014-08-06T17:07:32+00:00

commit 3213b151387df0b95f4eada104f68eb1c1409cb3 upstream.

The transfer burst count (TBC) field in xhci 1.0 hosts should be set
to the number of bursts needed to transfer all packets in a isoc TD.
Supported values are 0-2 (1 to 3 bursts per service interval).

Formula for TBC calculation is given in xhci spec section 4.11.2.3:
TBC = roundup( Transfer Descriptor Packet Count / Max Burst Size +1 ) - 1

This patch should be applied to stable kernels since 3.0 that contain
the commit 5cd43e33b9519143f06f507dd7cbee6b7a621885
"xhci 1.0: Set transfer burst count field."

Suggested-by: ShiChun Ma 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: EHCI: avoid BIOS handover on the HASEE E200

2014-07-11T12:33:51+00:00

commit b0a50e92bda3c4aeb8017d4e6c6e92146ebd5c9b upstream.

Leandro Liptak reports that his HASEE E200 computer hangs when we ask
the BIOS to hand over control of the EHCI host controller.  This
definitely sounds like a bug in the BIOS, but at the moment there is
no way to fix it.

This patch works around the problem by avoiding the handoff whenever
the motherboard and BIOS version match those of Leandro's computer.

Signed-off-by: Alan Stern 
Reported-by: Leandro Liptak 
Tested-by: Leandro Liptak 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings