linux-stable.git/drivers/usb/host, branch v3.2.36

xhci: Add Lynx Point LP to list of Intel switchable hosts

2013-01-03T03:33:19+00:00

commit bb1e5dd7113d2fd178d3af9aca8f480ae0468edf upstream.

Like Lynx Point, Lynx Point LP is also switchable.  See
1c12443ab8eba71a658fae4572147e56d1f84f66 for more details.

This patch should be backported to stable kernels as old as 3.0,
that contain commit 69e848c2090aebba5698a1620604c7dccb448684
"Intel xhci: Support EHCI/xHCI port switching."

Signed-off-by: Russell Webb 
Signed-off-by: Sarah Sharp 
Signed-off-by: Ben Hutchings

USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue

2013-01-03T03:33:16+00:00

commit 50ce5c0683aa83eb161624ea89daa5a9eee0c2ce upstream.

This patch (as1636) is a partial workaround for a hardware bug
affecting OHCI controllers by NVIDIA at least, maybe others too.  When
the controller retires a Transfer Descriptor, it is supposed to add
the TD onto the Done Queue.  But sometimes this doesn't happen, with
the result that ohci-hcd never realizes the corresponding transfer has
finished.  Symptoms can vary; a typical result is that USB audio stops
working after a while.

The patch works around the problem by recognizing that TDs are always
processed in order.  Therefore, if a later TD is found on the Done
Queue than all the earlier TDs for the same endpoint must be finished
as well.

Unfortunately this won't solve the problem in cases where the missing
TD is the last one in the endpoint's queue.  A complete fix would
require a signficant amount of change to the driver.

Signed-off-by: Alan Stern 
Tested-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

usb: host: xhci: Stricter conditional for Z1 system models for Compliance Mode Patch

2013-01-03T03:33:07+00:00

commit b0e4e606ff6ff26da0f60826e75577b56ba4e463 upstream.

This minor patch creates a more stricter conditional for the Z1 sytems for applying
the Compliance Mode Patch, this to avoid the quirk to be applied to models that
contain a "Z1" in their dmi product string but are different from Z1 systems.

This patch should be backported to stable kernels as old as 3.2, that
contain the commit 71c731a296f1b08a3724bd1b514b64f1bda87a23 "usb: host:
xhci: Fix Compliance Mode on SN65LVPE502CP Hardware"

Signed-off-by: Alexis R. Cortes 
Signed-off-by: Sarah Sharp 
Signed-off-by: Ben Hutchings

xhci: Extend Fresco Logic MSI quirk.

2013-01-03T03:33:07+00:00

commit bba18e33f25072ebf70fd8f7f0cdbf8cdb59a746 upstream.

Ali reports that plugging a device into the Fresco Logic xHCI host with
PCI device ID 1400 produces an IRQ error:

 do_IRQ: 3.176 No irq handler for vector (irq -1)

Other early Fresco Logic host revisions don't support MSI, even though
their PCI config space claims they do.  Extend the quirk to disabling
MSI to this chipset revision.  Also enable the short transfer quirk,
since it's likely this revision also has that quirk, and it should be
harmless to enable.

04:00.0 0c03: 1b73:1400 (rev 01) (prog-if 30 [XHCI])
        Subsystem: 1d5c:1000
        Physical Slot: 3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
Reported-by: A Sh 
Tested-by: A Sh 
Signed-off-by: Ben Hutchings

xhci: fix null-pointer dereference when destroying half-built segment rings

2013-01-03T03:33:06+00:00

commit 68e5254adb88bede68285f11fb442a4d34fb550c upstream.

xhci_alloc_segments_for_ring() builds a list of xhci_segments and links
the tail to head at the end (forming a ring). When it bails out for OOM
reasons half-way through, it tries to destroy its half-built list with
xhci_free_segments_for_ring(), even though it is not a ring yet. This
causes a null-pointer dereference upon hitting the last element.

Furthermore, one of its callers (xhci_ring_alloc()) mistakenly believes
the output parameters to be valid upon this kind of OOM failure, and
calls xhci_ring_free() on them. Since the (incomplete) list/ring should
already be destroyed in that case, this would lead to a use after free.

This patch fixes those issues by having xhci_alloc_segments_for_ring()
destroy its half-built, non-circular list manually and destroying the
invalid struct xhci_ring in xhci_ring_alloc() with a plain kfree().

This patch should be backported to kernels as old as 2.6.31, that
contains the commit 0ebbab37422315a5d0cb29792271085bafdf38c0 "USB: xhci:
Ring allocation and initialization."

A separate patch will need to be developed for kernels older than 3.4,
since the ring allocation code was refactored in that kernel.

Signed-off-by: Julius Werner 
Signed-off-by: Sarah Sharp 
[bwh: Backported to 3.2:
 - Adjust context
 - Since segment allocation is done directly in xhci_ring_alloc(), walk
   the list starting from ring->first_seg when freeing]
Signed-off-by: Ben Hutchings

xHCI: Fix TD Size calculation on 1.0 hosts.

2013-01-03T03:33:06+00:00

commit 4525c0a10dff7ad3669763c28016c7daffc3900e upstream.

The xHCI 1.0 specification made a change to the TD Size field in TRBs.
The value is now the number of packets that remain to be sent in the TD,
not including this TRB.  The TD Size value for the last TRB in a TD must
always be zero.

The xHCI function xhci_v1_0_td_remainder() attempts to calculate this,
but it gets it wrong.  First, it erroneously reuses the old
xhci_td_remainder function, which will right shift the value by 10.  The
xHCI 1.0 spec as of June 2011 says nothing about right shifting by 10.
Second, it does not set the TD size for the last TRB in a TD to zero.

Third, it uses roundup instead of DIV_ROUND_UP.  The total packet count
is supposed to be the total number of bytes in this TD, divided by the
max packet size, rounded up.  DIV_ROUND_UP is the right function to use
in that case.

With the old code, a TD on an endpoint with max packet size 1024 would
be set up like so:
TRB 1, TRB length = 600 bytes, TD size = 0
TRB 1, TRB length = 200 bytes, TD size = 0
TRB 1, TRB length = 100 bytes, TD size = 0

With the new code, the TD would be set up like this:
TRB 1, TRB length = 600 bytes, TD size = 1
TRB 1, TRB length = 200 bytes, TD size = 1
TRB 1, TRB length = 100 bytes, TD size = 0

This commit should be backported to kernels as old as 3.0, that contain
the commit 4da6e6f247a2601ab9f1e63424e4d944ed4124f3 "xhci 1.0: Update TD
size field format."

Signed-off-by: Sarah Sharp 
Reported-by: Chintan Mehta 
Reported-by: Shimmer Huang 
Tested-by: Bhavik Kothari 
Tested-by: Shimmer Huang 
Signed-off-by: Ben Hutchings

xhci: Fix conditional check in bandwidth calculation.

2013-01-03T03:33:05+00:00

commit 392a07ae3316f2b90b39ce41e66d6f6b5c95de90 upstream.

David reports that at drivers/usb/host/xhci.c:2257:

static bool xhci_is_sync_in_ep(unsigned int ep_type)
{
    return (ep_type == ISOC_IN_EP || ep_type != INT_IN_EP);
}

The static analyser cppcheck says

[linux-3.7-rc2/drivers/usb/host/xhci.c:2257]: (style) Redundant condition: If ep_type == 5, the comparison ep_type != 7 is always true.

Maybe the original programmer intention was something like

static bool xhci_is_sync_in_ep(unsigned int ep_type)
{
    return (ep_type == ISOC_IN_EP || ep_type == INT_IN_EP);
}

Fix this.

This patch should be backported to stable kernels as old as 3.2, that
contain the commit 2b69899934c63b7b9432568584fb4c4a2924f40c "xhci: USB
3.0 BW checking."

Signed-off-by: Sarah Sharp 
Reported-by: David Binderman 
Signed-off-by: Ben Hutchings

USB: EHCI: bugfix: urb->hcpriv should not be NULL

2013-01-03T03:33:04+00:00

commit 2656a9abcf1ec8dd5fee6a75d6997a0f2fa0094e upstream.

This patch (as1632b) fixes a bug in ehci-hcd.  The USB core uses
urb->hcpriv to determine whether or not an URB is active; host
controller drivers are supposed to set this pointer to a non-NULL
value when an URB is queued.  However ehci-hcd sets it to NULL for
isochronous URBs, which defeats the check in usbcore.

In itself this isn't a big deal.  But people have recently found that
certain sequences of actions will cause the snd-usb-audio driver to
reuse URBs without waiting for them to complete.  In the absence of
proper checking by usbcore, the URBs get added to their endpoint list
twice.  This leads to list corruption and a system freeze.

The patch makes ehci-hcd assign a meaningful value to urb->hcpriv for
isochronous URBs.  Improving robustness always helps.

Signed-off-by: Alan Stern 
Reported-by: Artem S. Tashkinov 
Reported-by: Christof Meerwald 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2:
 - Adjust context
 - Also use usb_pipetype() to work out whether we should call qh_put()]
Signed-off-by: Ben Hutchings

xhci: Remove scary warnings about transfer issues.

2012-12-06T11:20:19+00:00

commit 2a9227a5eeaeb3f91e3a72ceea4fa59016ca5d20 upstream.

Getting a short packet or a babble error is usually a recoverable error,
so stop scaring users with warnings in dmesg when xHCI debugging is turned
off.

Signed-off-by: Sarah Sharp 
Signed-off-by: Ben Hutchings

xhci: Remove warnings about MSI and MSI-X capabilities.

2012-12-06T11:20:19+00:00

commit 3b9783b277e66731891ab42eeaacebbdcdd6e629 upstream.

xHCI host controllers may not be capable of MSI, but they should be able
to be used in legacy PCI interrupt mode.  Similarly, some xHCI host
controllers will have MSI support but not MSI-X support.  Lower the
dmesg log level from an error to debug.  The message won't appear unless
CONFIG_USB_XHCI_HCD_DEBUGGING is turned on.

If we need to find out whether the device can support MSI or MSI-X and
it's not being enabled by the driver, it's easy to ask the user to run
lspci.

Signed-off-by: Sarah Sharp 
Signed-off-by: Ben Hutchings