linux-stable.git/drivers/usb/host, branch v3.14.23 Linux kernel stable tree USB: EHCI: unlink QHs even after the controller has stopped 2014-10-05T21:52:15+00:00 Alan Stern stern@rowland.harvard.edu 2014-09-17T15:23:54+00:00 375ef46305e47950460390e838ba589101066ae0 commit 7312b5ddd47fee2356baa78c5516ef8e04eed452 upstream. Old code in ehci-hcd tries to expedite disabling endpoints after the controller has stopped, by destroying the endpoint's associated QH without first unlinking the QH. This was necessary back when the driver wasn't so careful about keeping track of the controller's state. But now we are careful about it, and the driver knows that when the controller isn't running, no unlinking delay is needed. Furthermore, skipping the unlink step will trigger a BUG() in qh_destroy() when the preceding QH is released, because the link pointer will be non-NULL. Removing the lines that skip the unlinking step and go directly to QH_STATE_IDLE fixes the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7312b5ddd47fee2356baa78c5516ef8e04eed452 upstream.

Old code in ehci-hcd tries to expedite disabling endpoints after the
controller has stopped, by destroying the endpoint's associated QH
without first unlinking the QH.  This was necessary back when the
driver wasn't so careful about keeping track of the controller's
state.

But now we are careful about it, and the driver knows that when the
controller isn't running, no unlinking delay is needed.  Furthermore,
skipping the unlink step will trigger a BUG() in qh_destroy() when the
preceding QH is released, because the link pointer will be non-NULL.

Removing the lines that skip the unlinking step and go directly to
QH_STATE_IDLE fixes the problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: fix oops when xhci resumes from hibernate with hw lpm capable devices 2014-10-05T21:52:15+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2014-09-11T10:55:50+00:00 fe4b28ee560fc60ccd1f66ec218ee2aa80ba4612 commit 96044694b8511bc2b04df0776b4ba295cfe005c0 upstream. Resuming from hibernate (S4) will restart and re-initialize xHC. The device contexts are freed and will be re-allocated later during device reset. Usb core will disable link pm in device resume before device reset, which will try to change the max exit latency, accessing the device contexts before they are re-allocated. There is no need to zero (disable) the max exit latency when disabling hw lpm for a freshly re-initialized xHC. So check that device context exists before doing anything. The max exit latency will be set again after device reset when usb core enables the link pm. Reported-by: Imre Deak <imre.deak@intel.com> Tested-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 96044694b8511bc2b04df0776b4ba295cfe005c0 upstream.

Resuming from hibernate (S4) will restart and re-initialize xHC.
The device contexts are freed and will be re-allocated later during device reset.

Usb core will disable link pm in device resume before device reset, which will
try to change the max exit latency, accessing the device contexts before they are re-allocated.

There is no need to zero (disable) the max exit latency when disabling hw lpm
for a freshly re-initialized xHC. So check that device context exists before
doing anything. The max exit latency will be set again after device reset when usb core
enables the link pm.

Reported-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix null pointer dereference if xhci initialization fails 2014-10-05T21:52:15+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2014-09-11T10:55:48+00:00 f9fa62e52f2b895b326474e5d85c20bd8ddc41ab commit c207e7c50f31113c24a9f536fcab1e8a256985d7 upstream. If xhci initialization fails before the roothub bandwidth domains (xhci->rh_bw[i]) are allocated it will oops when trying to access rh_bw members in xhci_mem_cleanup(). Reported-by: Manuel Reimer <manuel.reimer@gmx.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c207e7c50f31113c24a9f536fcab1e8a256985d7 upstream.

If xhci initialization fails before the roothub bandwidth
domains (xhci->rh_bw[i]) are allocated it will oops when
trying to access rh_bw members in xhci_mem_cleanup().

Reported-by: Manuel Reimer <manuel.reimer@gmx.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: host: xhci: fix compliance mode workaround 2014-10-05T21:52:15+00:00 Felipe Balbi balbi@ti.com 2014-08-27T21:38:04+00:00 e6f8888cac03be4325d84c4269be9d5719c28d3f commit 96908589a8b2584b1185f834d365f5cc360e8226 upstream. Commit 71c731a (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware) implemented a workaround for a known issue with Texas Instruments' USB 3.0 redriver IC but it left a condition where any xHCI host would be taken out of reset if port was placed in compliance mode and there was no device connected to the port. That condition would trigger a fake connection to a non-existent device so that usbcore would trigger a warm reset of the port, thus taking the link out of reset. This has the side-effect of preventing any xHCI host connected to a Linux machine from starting and running the USB 3.0 Electrical Compliance Suite because the port will mysteriously taken out of compliance mode and, thus, xHCI won't step through the necessary compliance patterns for link validation. This patch fixes the issue by just adding a missing check for XHCI_COMP_MODE_QUIRK inside xhci_hub_report_usb3_link_state() when PORT_CAS isn't set. This patch should be backported to all kernels containing commit 71c731a. Fixes: 71c731a (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware) Cc: Alexis R. Cortes <alexis.cortes@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 96908589a8b2584b1185f834d365f5cc360e8226 upstream.

Commit 71c731a (usb: host: xhci: Fix Compliance Mode
on SN65LVP3502CP Hardware) implemented a workaround
for a known issue with Texas Instruments' USB 3.0
redriver IC but it left a condition where any xHCI
host would be taken out of reset if port was placed
in compliance mode and there was no device connected
to the port.

That condition would trigger a fake connection to a
non-existent device so that usbcore would trigger a
warm reset of the port, thus taking the link out of
reset.

This has the side-effect of preventing any xHCI host
connected to a Linux machine from starting and running
the USB 3.0 Electrical Compliance Suite because the
port will mysteriously taken out of compliance mode
and, thus, xHCI won't step through the necessary
compliance patterns for link validation.

This patch fixes the issue by just adding a missing
check for XHCI_COMP_MODE_QUIRK inside
xhci_hub_report_usb3_link_state() when PORT_CAS isn't
set.

This patch should be backported to all kernels containing
commit 71c731a.

Fixes: 71c731a (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware)
Cc: Alexis R. Cortes <alexis.cortes@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: ehci: using wIndex + 1 for hub port 2014-09-05T23:34:17+00:00 Peter Chen peter.chen@freescale.com 2014-08-05T00:28:19+00:00 a9cedf67702b5298f730e15ccda60753b9cb7f96 commit 5cbcc35e5bf0eae3c7494ce3efefffc9977827ae upstream. The roothub's index per controller is from 0, but the hub port index per hub is from 1, this patch fixes "can't find device at roohub" problem for connecting test fixture at roohub when do USB-IF Embedded Host High-Speed Electrical Test. This patch is for v3.12+. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5cbcc35e5bf0eae3c7494ce3efefffc9977827ae upstream.

The roothub's index per controller is from 0, but the hub port index per hub
is from 1, this patch fixes "can't find device at roohub" problem for connecting
test fixture at roohub when do USB-IF Embedded Host High-Speed Electrical Test.

This patch is for v3.12+.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: amd chipset also needs short TX quirk 2014-09-05T23:34:17+00:00 Huang Rui ray.huang@amd.com 2014-08-19T12:17:57+00:00 307dad0645cb01e61a78099a975a84fd9b86cc36 commit 2597fe99bb0259387111d0431691f5daac84f5a5 upstream. AMD xHC also needs short tx quirk after tested on most of chipset generations. That's because there is the same incorrect behavior like Fresco Logic host. Please see below message with on USB webcam attached on xHC host: [ 139.262944] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.266934] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.270913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.274937] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.278914] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.282936] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.286915] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.290938] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.294913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [ 139.298917] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? Reported-by: Arindam Nath <arindam.nath@amd.com> Tested-by: Shriraj-Rai P <shriraj-rai.p@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2597fe99bb0259387111d0431691f5daac84f5a5 upstream.

AMD xHC also needs short tx quirk after tested on most of chipset
generations. That's because there is the same incorrect behavior like
Fresco Logic host. Please see below message with on USB webcam
attached on xHC host:

[  139.262944] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.266934] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.270913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.274937] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.278914] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.282936] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.286915] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.290938] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.294913] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[  139.298917] xhci_hcd 0000:00:10.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?

Reported-by: Arindam Nath <arindam.nath@amd.com>
Tested-by: Shriraj-Rai P <shriraj-rai.p@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Treat not finding the event_seg on COMP_STOP the same as COMP_STOP_INVAL 2014-09-05T23:34:17+00:00 Hans de Goede hdegoede@redhat.com 2014-08-19T12:17:56+00:00 d5dbf1cb56d041075a3ad98153030d7cb7232a4d commit 9a54886342e227433aebc9d374f8ae268a836475 upstream. When using a Renesas uPD720231 chipset usb-3 uas to sata bridge with a 120G Crucial M500 ssd, model string: Crucial_ CT120M500SSD1, together with a the integrated Intel xhci controller on a Haswell laptop: 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) The following error gets logged to dmesg: xhci error: Transfer event TRB DMA ptr not part of current TD Treating COMP_STOP the same as COMP_STOP_INVAL when no event_seg gets found fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9a54886342e227433aebc9d374f8ae268a836475 upstream.

When using a Renesas uPD720231 chipset usb-3 uas to sata bridge with a 120G
Crucial M500 ssd, model string: Crucial_ CT120M500SSD1, together with a
the integrated Intel xhci controller on a Haswell laptop:

00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04)

The following error gets logged to dmesg:

xhci error: Transfer event TRB DMA ptr not part of current TD

Treating COMP_STOP the same as COMP_STOP_INVAL when no event_seg gets found
fixes this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ehci-pci: USB host controller support for Intel Quark X1000 2014-09-05T23:34:12+00:00 Bryan O'Donoghue bryan.odonoghue@intel.com 2014-07-02T08:58:18+00:00 5d2ce3661231cdd37d7a504703507f8fefc6a3cb commit 6e693739e9b603b3ca9ce0d4f4178f0633458465 upstream. The EHCI packet buffer in/out threshold is programmable for Intel Quark X1000 USB host controller, and the default value is 0x20 dwords. The in/out threshold can be programmed to 0x80 dwords (512 Bytes) to maximize the perfomrance, but only when isochronous/interrupt transactions are not initiated by the USB host controller. This patch is to reconfigure the packet buffer in/out threshold as maximal as possible to maximize the performance, and 0x7F dwords (508 Bytes) should be used because the USB host controller initiates isochronous/interrupt transactions. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@intel.com> Signed-off-by: Alvin (Weike) Chen <alvin.chen@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6e693739e9b603b3ca9ce0d4f4178f0633458465 upstream.

The EHCI packet buffer in/out threshold is programmable for Intel Quark X1000
USB host controller, and the default value is 0x20 dwords. The in/out threshold
can be programmed to 0x80 dwords (512 Bytes) to maximize the perfomrance,
but only when isochronous/interrupt transactions are not initiated by the USB
host controller. This patch is to reconfigure the packet buffer in/out
threshold as maximal as possible to maximize the performance, and 0x7F dwords
(508 Bytes) should be used because the USB host controller initiates
isochronous/interrupt transactions.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@intel.com>
Signed-off-by: Alvin (Weike) Chen <alvin.chen@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: OHCI: don't lose track of EDs when a controller dies 2014-09-05T23:34:12+00:00 Alan Stern stern@rowland.harvard.edu 2014-07-17T20:34:29+00:00 774710c90e906c0984b45f9591835a577f8e80f9 commit 977dcfdc60311e7aa571cabf6f39c36dde13339e upstream. This patch fixes a bug in ohci-hcd. When an URB is unlinked, the corresponding Endpoint Descriptor is added to the ed_rm_list and taken off the hardware schedule. Once the ED is no longer visible to the hardware, finish_unlinks() handles the URBs that were unlinked or have completed. If any URBs remain attached to the ED, the ED is added back to the hardware schedule -- but only if the controller is running. This fails when a controller dies. A non-empty ED does not get added back to the hardware schedule and does not remain on the ed_rm_list; ohci-hcd loses track of it. The remaining URBs cannot be unlinked, which causes the USB stack to hang. The patch changes finish_unlinks() so that non-empty EDs remain on the ed_rm_list if the controller isn't running. This requires moving some of the existing code around, to avoid modifying the ED's hardware fields more than once. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 977dcfdc60311e7aa571cabf6f39c36dde13339e upstream.

This patch fixes a bug in ohci-hcd.  When an URB is unlinked, the
corresponding Endpoint Descriptor is added to the ed_rm_list and taken
off the hardware schedule.  Once the ED is no longer visible to the
hardware, finish_unlinks() handles the URBs that were unlinked or have
completed.  If any URBs remain attached to the ED, the ED is added
back to the hardware schedule -- but only if the controller is
running.

This fails when a controller dies.  A non-empty ED does not get added
back to the hardware schedule and does not remain on the ed_rm_list;
ohci-hcd loses track of it.  The remaining URBs cannot be unlinked,
which causes the USB stack to hang.

The patch changes finish_unlinks() so that non-empty EDs remain on
the ed_rm_list if the controller isn't running.  This requires moving
some of the existing code around, to avoid modifying the ED's hardware
fields more than once.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: OHCI: fix bugs in debug routines 2014-09-05T23:34:12+00:00 Alan Stern stern@rowland.harvard.edu 2014-07-17T20:32:26+00:00 f9fd934da7adc03cb8d341a4ae4ffac038b5adff commit 256dbcd80f1ccf8abf421c1d72ba79a4e29941dd upstream. The debug routine fill_async_buffer() in ohci-hcd is buggy: It never produces any output because it forgets to initialize the output buffer size. Also, the debug routine ohci_dump() has an unused argument. This patch adds the correct initialization and removes the unused argument. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 256dbcd80f1ccf8abf421c1d72ba79a4e29941dd upstream.

The debug routine fill_async_buffer() in ohci-hcd is buggy: It never
produces any output because it forgets to initialize the output buffer
size.  Also, the debug routine ohci_dump() has an unused argument.

This patch adds the correct initialization and removes the unused
argument.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>