linux-stable.git/drivers/usb/host, branch v3.0.61

USB: UHCI: fix IRQ race during initialization

2013-01-28T04:46:28+00:00

commit 0f815a0a700bc10547449bde6c106051a035a1b9 upstream.

This patch (as1644) fixes a race that occurs during startup in
uhci-hcd.  If the IRQ line is shared with other devices, it's possible
for the handler routine to be called before the data structures are
fully initialized.

The problem is fixed by adding a check to the IRQ handler routine.  If
the initialization hasn't finished yet, the routine will return
immediately.

Signed-off-by: Alan Stern 
Reported-by: Don Zickus 
Tested-by: "Huang, Adrian (ISS Linux TW)" 
Signed-off-by: Greg Kroah-Hartman

xhci: fix null-pointer dereference when destroying half-built segment rings

2013-01-21T19:44:59+00:00

commit 68e5254adb88bede68285f11fb442a4d34fb550c upstream.

xhci_alloc_segments_for_ring() builds a list of xhci_segments and links
the tail to head at the end (forming a ring). When it bails out for OOM
reasons half-way through, it tries to destroy its half-built list with
xhci_free_segments_for_ring(), even though it is not a ring yet. This
causes a null-pointer dereference upon hitting the last element.

Furthermore, one of its callers (xhci_ring_alloc()) mistakenly believes
the output parameters to be valid upon this kind of OOM failure, and
calls xhci_ring_free() on them. Since the (incomplete) list/ring should
already be destroyed in that case, this would lead to a use after free.

This patch fixes those issues by having xhci_alloc_segments_for_ring()
destroy its half-built, non-circular list manually and destroying the
invalid struct xhci_ring in xhci_ring_alloc() with a plain kfree().

This patch should be backported to kernels as old as 2.6.31, that
contains the commit 0ebbab37422315a5d0cb29792271085bafdf38c0 "USB: xhci:
Ring allocation and initialization."

A separate patch will need to be developed for kernels older than 3.4,
since the ring allocation code was refactored in that kernel.

Signed-off-by: Julius Werner 
Signed-off-by: Sarah Sharp 
Signed-off-by: Julius Werner 
Signed-off-by: Sarah Sharp 
[bwh: Backported to 3.2:
 - Adjust context
 - Since segment allocation is done directly in xhci_ring_alloc(), walk
   the list starting from ring->first_seg when freeing]
Signed-off-by: Ben Hutchings 
Signed-off-by: CAI Qian 
Signed-off-by: Greg Kroah-Hartman

xhci: Handle HS bulk/ctrl endpoints that don't NAK.

2013-01-17T16:44:12+00:00

commit 55c1945edaac94c5338a3647bc2e85ff75d9cf36 upstream.

A high speed control or bulk endpoint may have bInterval set to zero,
which means it does not NAK.  If bInterval is non-zero, it means the
endpoint NAKs at a rate of 2^(bInterval - 1).

The xHCI code to compute the NAK interval does not handle the special
case of zero properly.  The current code unconditionally subtracts one
from bInterval and uses it as an exponent.  This causes a very large
bInterval to be used, and warning messages like these will be printed:

usb 1-1: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes

This may cause the xHCI host hardware to reject the Configure Endpoint
command, which means the HS device will be unusable under xHCI ports.

This patch should be backported to kernels as old as 2.6.31, that contain
commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in
xhci_get_endpoint_interval()".

Reported-by: Vincent Pelletier 
Suggested-by: Alan Stern 
Signed-off-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman

xhci: Add Lynx Point LP to list of Intel switchable hosts

2013-01-11T17:03:41+00:00

commit bb1e5dd7113d2fd178d3af9aca8f480ae0468edf upstream.

Like Lynx Point, Lynx Point LP is also switchable.  See
1c12443ab8eba71a658fae4572147e56d1f84f66 for more details.

This patch should be backported to stable kernels as old as 3.0,
that contain commit 69e848c2090aebba5698a1620604c7dccb448684
"Intel xhci: Support EHCI/xHCI port switching."

Signed-off-by: Russell Webb 
Signed-off-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman

xhci: Extend Fresco Logic MSI quirk.

2012-12-17T18:49:05+00:00

commit bba18e33f25072ebf70fd8f7f0cdbf8cdb59a746 upstream.

Ali reports that plugging a device into the Fresco Logic xHCI host with
PCI device ID 1400 produces an IRQ error:

 do_IRQ: 3.176 No irq handler for vector (irq -1)

Other early Fresco Logic host revisions don't support MSI, even though
their PCI config space claims they do.  Extend the quirk to disabling
MSI to this chipset revision.  Also enable the short transfer quirk,
since it's likely this revision also has that quirk, and it should be
harmless to enable.

04:00.0 0c03: 1b73:1400 (rev 01) (prog-if 30 [XHCI])
        Subsystem: 1d5c:1000
        Physical Slot: 3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
Reported-by: A Sh 
Tested-by: A Sh 
Signed-off-by: Greg Kroah-Hartman

USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue

2012-12-17T18:49:04+00:00

commit 50ce5c0683aa83eb161624ea89daa5a9eee0c2ce upstream.

This patch (as1636) is a partial workaround for a hardware bug
affecting OHCI controllers by NVIDIA at least, maybe others too.  When
the controller retires a Transfer Descriptor, it is supposed to add
the TD onto the Done Queue.  But sometimes this doesn't happen, with
the result that ohci-hcd never realizes the corresponding transfer has
finished.  Symptoms can vary; a typical result is that USB audio stops
working after a while.

The patch works around the problem by recognizing that TDs are always
processed in order.  Therefore, if a later TD is found on the Done
Queue than all the earlier TDs for the same endpoint must be finished
as well.

Unfortunately this won't solve the problem in cases where the missing
TD is the last one in the endpoint's queue.  A complete fix would
require a signficant amount of change to the driver.

Signed-off-by: Alan Stern 
Tested-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

xhci: Fix potential NULL ptr deref in command cancellation.

2012-10-31T16:51:36+00:00

commit 43a09f7fb01fa1e091416a2aa49b6c666458c1ee upstream.

The command cancellation code doesn't check whether find_trb_seg()
couldn't find the segment that contains the TRB to be canceled.  This
could cause a NULL pointer deference later in the function when next_trb
is called.  It's unlikely to happen unless something is wrong with the
command ring pointers, so add some debugging in case it happens.

This patch should be backported to stable kernels as old as 3.0, that
contain the commit b63f4053cc8aa22a98e3f9a97845afe6c15d0a0d "xHCI:
handle command after aborting the command ring".

Signed-off-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman

ehci: Add yet-another Lucid nohandoff pci quirk

2012-10-31T16:51:35+00:00

commit 8daf8b6086f9d575200cd0aa3797e26137255609 upstream.

Board name changed on another shipping Lucid tablet.

Signed-off-by: Anisse Astier 
Signed-off-by: Greg Kroah-Hartman

ehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versions

2012-10-31T16:51:35+00:00

commit c323dc023b9501e5d09582ec7efd1d40a9001d99 upstream.

BIOS vendors keep changing the BIOS versions. Only match the beginning
of the string to match all Lucid tablets with board name M11JB.

Signed-off-by: Anisse Astier 
Signed-off-by: Greg Kroah-Hartman

xHCI: handle command after aborting the command ring

2012-10-28T17:02:14+00:00

commit b63f4053cc8aa22a98e3f9a97845afe6c15d0a0d upstream.

According to xHCI spec section 4.6.1.1 and section 4.6.1.2,
after aborting a command on the command ring, xHC will
generate a command completion event with its completion
code set to Command Ring Stopped at least. If a command is
currently executing at the time of aborting a command, xHC
also generate a command completion event with its completion
code set to Command Abort. When the command ring is stopped,
software may remove, add, or rearrage Command Descriptors.

To cancel a command, software will initialize a command
descriptor for the cancel command, and add it into a
cancel_cmd_list of xhci. When the command ring is stopped,
software will find the command trbs described by command
descriptors in cancel_cmd_list and modify it to No Op
command. If software can't find the matched trbs, we can
think it had been finished.

This patch should be backported to kernels as old as 3.0, that contain
the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an
assertion to check for virt_dev=0 bug." That commit papers over a NULL
pointer dereference, and this patch fixes the underlying issue that
caused the NULL pointer dereference.

Note from Sarah: The TRB_TYPE_LINK_LE32 macro is not in the 3.0 stable
kernel, so I added it to this patch.

Signed-off-by: Elric Fu 
Signed-off-by: Sarah Sharp 
Tested-by: Miroslav Sabljic 
Signed-off-by: Greg Kroah-Hartman