linux-stable.git/drivers/usb/host, branch linux-5.0.y

usb: u132-hcd: fix resource leak

2019-05-04T07:21:19+00:00

[ Upstream commit f276e002793cdb820862e8ea8f76769d56bba575 ]

if platform_driver_register fails, cleanup the allocated resource
gracefully.

Signed-off-by: Mukesh Ojha 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin (Microsoft)

xhci: Don't let USB3 ports stuck in polling state prevent suspend

2019-04-03T04:27:36+00:00

commit d92f2c59cc2cbca6bfb2cc54882b58ba76b15fd4 upstream.

Commit 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect
change or polling state is detected") was intended to prevent ports that
were still link training from being forced to U3 suspend state mid
enumeration.
This solved enumeration issues for devices with slow link training.

Turns out some devices are stuck in the link training/polling state,
and thus that patch will prevent suspend completely for these devices.
This is seen with USB3 card readers in some MacBooks.

Instead of preventing suspend, give some time to complete the link
training. On successful training the port will end up as connected
and enabled.
If port instead is stuck in link training the bus suspend will continue
suspending after 360ms (10 * 36ms) timeout (tPollingLFPSTimeout).

Original patch was sent to stable, this one should go there as well

Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

usb: xhci: dbc: Don't free all memory with spinlock held

2019-04-03T04:27:36+00:00

commit 8867ea262196a6945c24a0fb739575af646ec0e9 upstream.

The xhci debug capability (DbC) feature did its memory cleanup with
spinlock held. dma_free_coherent() warns if called with interrupts
disabled

move the memory cleanup outside the spinlock

Cc: stable 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

xhci: Fix port resume done detection for SS ports with LPM enabled

2019-04-03T04:27:36+00:00

commit 6cbcf596934c8e16d6288c7cc62dfb7ad8eadf15 upstream.

A suspended SS port in U3 link state will go to U0 when resumed, but
can almost immediately after that enter U1 or U2 link power save
states before host controller driver reads the port status.

Host controller driver only checks for U0 state, and might miss
the finished resume, leaving flags unclear and skip notifying usb
code of the wake.

Add U1 and U2 to the possible link states when checking for finished
port resume.

Cc: stable 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-rcar: Add XHCI_TRUST_TX_LENGTH quirk

2019-04-03T04:27:36+00:00

commit 40fc165304f0faaae78b761f8ee30b5d216b1850 upstream.

When plugging BUFFALO LUA4-U3-AGT USB3.0 to Gigabit Ethernet LAN
Adapter, warning messages filled up dmesg.

[  101.098287] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk?
[  101.117463] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk?
[  101.136513] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk?

Adding the XHCI_TRUST_TX_LENGTH quirk resolves the issue.

Signed-off-by: Yasushi Asano 
Signed-off-by: Spyridon Papageorgiou 
Acked-by: Yoshihiro Shimoda 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI

2019-03-10T06:09:00+00:00

commit 8fde481ef3674ae5ad0dbfef4df18ff507c5675a upstream.

This fix enables USB role feature on intel commercial nuc
platform which is based on Kabylake chipset.

Signed-off-by: Balaji Manoharan 
Reviewed-by: Hans de Goede 
Reviewed-by: Heikki Krogerus 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

xhci: tegra: Prevent error pointer dereference

2019-03-10T06:09:00+00:00

commit 0326ccb5feac6eac35ba6254260e2774277cd976 upstream.

During initialization, the host and super-speed power domains will
contain an ERR_PTR() encoded error code rather than being NULL. To
avoid a crash, use a !IS_ERR_OR_NULL() condition during cleanup.

Signed-off-by: Thierry Reding 
Fixes: 6494a9ad86de ("usb: xhci: tegra: Add genpd support")
Cc: stable 
Reviewed-by: Jon Hunter 
Acked-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE

2019-01-18T09:07:05+00:00

This fixes autoloading the module by the OF compatible string.

Fixes: 813e18b18a87 ("USB: EHCI: ehci-mv: add DT support")
Cc: stable@vger.kernel.org
Signed-off-by: Lubomir Rintel 
Signed-off-by: Greg Kroah-Hartman

cross-tree: phase out dma_zalloc_coherent()

2019-01-08T12:58:37+00:00

We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.

This change was generated with the following Coccinelle SmPL patch:

@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@

-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)

Suggested-by: Christoph Hellwig 
Signed-off-by: Luis Chamberlain 
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig

Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2019-01-01T23:55:29+00:00

Pull IOMMU updates from Joerg Roedel:

 - Page table code for AMD IOMMU now supports large pages where smaller
   page-sizes were mapped before. VFIO had to work around that in the
   past and I included a patch to remove it (acked by Alex Williamson)

 - Patches to unmodularize a couple of IOMMU drivers that would never
   work as modules anyway.

 - Work to unify the the iommu-related pointers in 'struct device' into
   one pointer. This work is not finished yet, but will probably be in
   the next cycle.

 - NUMA aware allocation in iommu-dma code

 - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver

 - Scalable mode support for the Intel VT-d driver

 - PM runtime improvements for the ARM-SMMU driver

 - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom

 - Various smaller fixes and improvements

* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
  iommu: Check for iommu_ops == NULL in iommu_probe_device()
  ACPI/IORT: Don't call iommu_ops->add_device directly
  iommu/of: Don't call iommu_ops->add_device directly
  iommu: Consolitate ->add/remove_device() calls
  iommu/sysfs: Rename iommu_release_device()
  dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
  xhci: Use device_iommu_mapped()
  powerpc/iommu: Use device_iommu_mapped()
  ACPI/IORT: Use device_iommu_mapped()
  iommu/of: Use device_iommu_mapped()
  driver core: Introduce device_iommu_mapped() function
  iommu/tegra: Use helper functions to access dev->iommu_fwspec
  iommu/qcom: Use helper functions to access dev->iommu_fwspec
  iommu/of: Use helper functions to access dev->iommu_fwspec
  iommu/mediatek: Use helper functions to access dev->iommu_fwspec
  iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
  iommu/dma: Use helper functions to access dev->iommu_fwspec
  iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
  ACPI/IORT: Use helper functions to access dev->iommu_fwspec
  iommu: Introduce wrappers around dev->iommu_fwspec
  ...