linux-stable.git/drivers/usb/host, branch linux-3.2.y Linux kernel stable tree xhci: Fix front USB ports on ASUS PRIME B350M-A 2018-05-31T23:30:21+00:00 Kai-Heng Feng kai.heng.feng@canonical.com 2018-03-08T15:17:17+00:00 47e0a4def4d2e1dfcef1fcf1b78706c24584351b commit 191edc5e2e515aab1075a3f0ef23599e80be5f59 upstream. When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the xHC stops working: [ 549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout [ 549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110 [ 549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110) Delay before running xHC command CMD_RUN can workaround the issue. Use a new quirk to make the delay only targets to the affected xHC. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 191edc5e2e515aab1075a3f0ef23599e80be5f59 upstream.

When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the
xHC stops working:
[  549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout
[  549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110
[  549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110)

Delay before running xHC command CMD_RUN can workaround the issue.

Use a new quirk to make the delay only targets to the affected xHC.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() 2018-05-31T23:30:16+00:00 AMAN DEEP aman.deep@samsung.com 2018-02-08T03:55:01+00:00 34ee743350e4b69467822c1c58df6d933893d040 commit 46408ea558df13b110e0866b99624384a33bdeba upstream. There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes: 977dcfdc6031 ("USB: OHCI: don't lose track of EDs when a controller dies") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Aman Deep <aman.deep@samsung.com> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 46408ea558df13b110e0866b99624384a33bdeba upstream.

There is a race condition between finish_unlinks->finish_urb() function
and usb_kill_urb() in ohci controller case. The finish_urb calls
spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call,
then if during this time, usb_kill_urb is called for another endpoint,
then new ed will be added to ed_rm_list at beginning for unlink, and
ed_rm_list will point to newly added.

When finish_urb() is completed in finish_unlinks() and ed->td_list
becomes empty as in below code (in finish_unlinks() function):

        if (list_empty(&ed->td_list)) {
                *last = ed->ed_next;
                ed->ed_next = NULL;
        } else if (ohci->rh_state == OHCI_RH_RUNNING) {
                *last = ed->ed_next;
                ed->ed_next = NULL;
                ed_schedule(ohci, ed);
        }

The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next
and previously added ed by usb_kill_urb will be left unreferenced by
ed_rm_list. This causes usb_kill_urb() hang forever waiting for
finish_unlink to remove added ed from ed_rm_list.

The main reason for hang in this race condtion is addition and removal
of ed from ed_rm_list in the beginning during usb_kill_urb and later
last* is modified in finish_unlinks().

As suggested by Alan Stern, the solution for proper handling of
ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing
any URBs. Then at the end, we can add ed back to the list if necessary.

This properly handle the updated ohci->ed_rm_list in usb_kill_urb().

Fixes: 977dcfdc6031 ("USB: OHCI: don't lose track of EDs when a controller dies")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Aman Deep <aman.deep@samsung.com>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
USB: OHCI: Fix race between ED unlink and URB submission 2018-05-31T23:30:16+00:00 Alan Stern stern@rowland.harvard.edu 2015-06-30T15:25:54+00:00 0ebead18aa59b4095e919af108e40d4375e50c5f commit 7d8021c967648accd1b78e5e1ddaad655cd2c61f upstream. This patch fixes a bug introduced by commit 977dcfdc6031 ("USB: OHCI: don't lose track of EDs when a controller dies"). The commit changed ed_state from ED_UNLINK to ED_IDLE too early, before finish_urb() had been called. The user-visible consequence is that the driver occasionally crashes or locks up when an URB is submitted while another URB for the same endpoint is being unlinked. This patch moves the ED state change later, to the right place. The drawback is that now we may unnecessarily execute some instructions multiple times when a controller dies. Since controllers dying is an exceptional occurrence, a little wasted time won't matter. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Heiko Przybyl <lil_tux@web.de> Tested-by: Heiko Przybyl <lil_tux@web.de> Fixes: 977dcfdc60311e7aa571cabf6f39c36dde13339e Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 7d8021c967648accd1b78e5e1ddaad655cd2c61f upstream.

This patch fixes a bug introduced by commit 977dcfdc6031 ("USB: OHCI:
don't lose track of EDs when a controller dies").  The commit changed
ed_state from ED_UNLINK to ED_IDLE too early, before finish_urb() had
been called.  The user-visible consequence is that the driver
occasionally crashes or locks up when an URB is submitted while
another URB for the same endpoint is being unlinked.

This patch moves the ED state change later, to the right place.  The
drawback is that now we may unnecessarily execute some instructions
multiple times when a controller dies.  Since controllers dying is an
exceptional occurrence, a little wasted time won't matter.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Heiko Przybyl <lil_tux@web.de>
Tested-by: Heiko Przybyl <lil_tux@web.de>
Fixes: 977dcfdc60311e7aa571cabf6f39c36dde13339e
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: Don't add a virt_dev to the devs array before it's fully allocated 2018-03-03T15:50:45+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2017-12-08T16:10:05+00:00 3a70d5ab61400027633a873b9a2d958df39123c8 commit 5d9b70f7d52eb14bb37861c663bae44de9521c35 upstream. Avoid null pointer dereference if some function is walking through the devs array accessing members of a new virt_dev that is mid allocation. Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its members are properly allocated. issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port "Quick analysis suggests that xhci_alloc_virt_device() is not mutex protected. If so, there is a time frame where xhci->devs[slot_id] is set but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL." Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: There is an extra failure path, so we may need to free dev->eps[0].ring] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 5d9b70f7d52eb14bb37861c663bae44de9521c35 upstream.

Avoid null pointer dereference if some function is walking through the
devs array accessing members of a new virt_dev that is mid allocation.

Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its
members are properly allocated.

issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port

"Quick analysis suggests that xhci_alloc_virt_device() is not mutex
protected. If so, there is a time frame where xhci->devs[slot_id] is set
but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL."

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: There is an extra failure path, so we may need to
 free dev->eps[0].ring] 
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: Don't show incorrect WARN message about events for empty rings 2018-03-03T15:50:42+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2017-12-01T11:41:19+00:00 69932dcebfbe74ac11313756b86aaea2e18c5b1c commit e4ec40ec4b260efcca15089de4285a0a3411259b upstream. xHC can generate two events for a short transfer if the short TRB and last TRB in the TD are not the same TRB. The driver will handle the TD after the first short event, and remove it from its internal list. Driver then incorrectly prints a warning for the second event: "WARN Event TRB for slot x ep y with no TDs queued" Fix this by not printing a warning if we get a event on a empty list if the previous event was a short event. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit e4ec40ec4b260efcca15089de4285a0a3411259b upstream.

xHC can generate two events for a short transfer if the short TRB and
last TRB in the TD are not the same TRB.

The driver will handle the TD after the first short event, and remove
it from its internal list. Driver then incorrectly prints a warning
for the second event:

"WARN Event TRB for slot x ep y with no TDs queued"

Fix this by not printing a warning if we get a event on a empty list
if the previous event was a short event.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: host: fix incorrect updating of offset 2018-03-03T15:50:40+00:00 Colin Ian King colin.king@canonical.com 2017-11-07T16:45:04+00:00 6bfe491e9ebfac511ed2c180ffaf9d7e01830584 commit 1d5a31582ef046d3b233f0da1a68ae26519b2f0a upstream. The variable temp is incorrectly being updated, instead it should be offset otherwise the loop just reads the same capability value and loops forever. Thanks to Alan Stern for pointing out the correct fix to my original fix. Fix also cleans up clang warning: drivers/usb/host/ehci-dbg.c:840:4: warning: Value stored to 'temp' is never read Fixes: d49d43174400 ("USB: misc ehci updates") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 1d5a31582ef046d3b233f0da1a68ae26519b2f0a upstream.

The variable temp is incorrectly being updated, instead it should
be offset otherwise the loop just reads the same capability value
and loops forever.  Thanks to Alan Stern for pointing out the
correct fix to my original fix.  Fix also cleans up clang warning:

drivers/usb/host/ehci-dbg.c:840:4: warning: Value stored to 'temp'
is never read

Fixes: d49d43174400 ("USB: misc ehci updates")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: pci-quirks.c: Corrected timeout values used in handshake 2018-01-01T20:50:50+00:00 Jim Dickerson jim.dickerson@hpe.com 2017-09-18T14:39:14+00:00 6c7d6c44646e59ef9443c51f60c251b907dbc180 commit 114ec3a6f9096d211a4aff4277793ba969a62c73 upstream. Servers were emitting failed handoff messages but were not waiting the full 1 second as designated in section 4.22.1 of the eXtensible Host Controller Interface specifications. The handshake was using wrong units so calls were made with milliseconds not microseconds. Comments referenced 5 seconds not 1 second as in specs. The wrong units were also corrected in a second handshake call. Signed-off-by: Jim Dickerson <jim.dickerson@hpe.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 114ec3a6f9096d211a4aff4277793ba969a62c73 upstream.

Servers were emitting failed handoff messages but were not
waiting the full 1 second as designated in section 4.22.1 of
the eXtensible Host Controller Interface specifications. The
handshake was using wrong units so calls were made with milliseconds
not microseconds. Comments referenced 5 seconds not 1 second as
in specs.

The wrong units were also corrected in a second handshake call.

Signed-off-by: Jim Dickerson <jim.dickerson@hpe.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: fix finding correct bus_state structure for USB 3.1 hosts 2018-01-01T20:50:49+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2017-09-18T14:39:13+00:00 5e425d575cd83c9de5662378e78b90f2e39712dc commit 5a838a13c9b4e5dd188b7a6eaeb894e9358ead0c upstream. xhci driver keeps a bus_state structure for each hcd (usb2 and usb3) The structure is picked based on hcd speed, but driver only compared for HCD_USB3 speed, returning the wrong bus_state for HCD_USB31 hosts. This caused null pointer dereference errors in bus_resume function. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 5a838a13c9b4e5dd188b7a6eaeb894e9358ead0c upstream.

xhci driver keeps a bus_state structure for each hcd (usb2 and usb3)

The structure is picked based on hcd speed, but driver only compared
for HCD_USB3 speed, returning the wrong bus_state for HCD_USB31 hosts.

This caused null pointer dereference errors in bus_resume function.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
xhci: Limit USB2 port wake support for AMD Promontory hosts 2017-10-12T14:27:10+00:00 Jiahau Chang jiahau@gmail.com 2017-06-19T10:08:30+00:00 7dcc74d30e836ac96d2b9552c80e6fca03155c35 commit dec08194ffeccfa1cf085906b53d301930eae18f upstream. For AMD Promontory xHCI host, although you can disable USB 2.0 ports in BIOS settings, those ports will be enabled anyway after you remove a device on that port and re-plug it in again. It's a known limitation of the chip. As a workaround we can clear the PORT_WAKE_BITS. This will disable wake on connect, disconnect and overcurrent on AMD Promontory USB2 ports [checkpatch cleanup and commit message reword -Mathias] Cc: Tsai Nicholas <nicholas.tsai@amd.com> Signed-off-by: Jiahau Chang <Lars_Chang@asmedia.com.tw> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit dec08194ffeccfa1cf085906b53d301930eae18f upstream.

For AMD Promontory xHCI host, although you can disable USB 2.0 ports in
BIOS settings, those ports will be enabled anyway after you remove a
device on that port and re-plug it in again. It's a known limitation of
the chip. As a workaround we can clear the PORT_WAKE_BITS.

This will disable wake on connect, disconnect and overcurrent on
AMD Promontory USB2 ports

[checkpatch cleanup and commit message reword -Mathias]
Cc: Tsai Nicholas <nicholas.tsai@amd.com>
Signed-off-by: Jiahau Chang <Lars_Chang@asmedia.com.tw>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
usb: xhci: ASMedia ASM1042A chipset need shorts TX quirk 2017-09-15T17:30:53+00:00 Corentin Labbe clabbe.montjoie@gmail.com 2017-06-09T11:48:41+00:00 466621f4858c27d263a3f5ce6c9f15d1c5bd4cfc commit d2f48f05cd2a2a0a708fbfa45f1a00a87660d937 upstream. When plugging an USB webcam I see the following message: [106385.615559] xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [106390.583860] handle_tx_event: 913 callbacks suppressed With this patch applied, I get no more printing of this message. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit d2f48f05cd2a2a0a708fbfa45f1a00a87660d937 upstream.

When plugging an USB webcam I see the following message:
[106385.615559] xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[106390.583860] handle_tx_event: 913 callbacks suppressed

With this patch applied, I get no more printing of this message.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>