Fix kconfig warnings and build errors in UWB/WUSB/USB_HWA etc. by making all of these related symbols depend on UWB. warning: (USB_WHCI_HCD && USB_HWA_HCD) selects USB_WUSB which has unmet direct dependencies (USB_SUPPORT && EXPERIMENTAL && USB && PCI && UWB) warning: (USB_HWA_HCD) selects UWB_HWA which has unmet direct dependencies (UWB && USB) which lead to: ERROR: "uwb_rsv_establish" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_register" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_get_usable_mas" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_destroy" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_radio_stop" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_terminate" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_unregister" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_init" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rc_reset_all" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_radio_start" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_create" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rc_put" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "uwb_rc_get_by_grandpa" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "__umc_driver_register" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "umc_driver_unregister" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "whci_wait_for" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "uwb_rc_get_by_grandpa" [drivers/usb/host/hwa-hc.ko] undefined! ERROR: "uwb_rc_put" [drivers/usb/host/hwa-hc.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Distinguish Kconfig text by providing the Freescale family name. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits)
MIPS: Delete unused function add_temporary_entry.
MIPS: Set default pci cache line size.
MIPS: Flush huge TLB
MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM.
MIPS: Octeon: Add support for OCTEON II PCIe
MIPS: Octeon: Update PCI Latency timer and enable more error reporting.
MIPS: Alchemy: Update cpu-feature-overrides
MIPS: Alchemy: db1200: Improve PB1200 detection.
MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code.
MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller
MIPS: Alchemy: irq: register pm at irq init time
MIPS: Alchemy: Touchscreen support on DB1100
MIPS: Alchemy: Hook up IrDA on DB1000/DB1100
net/irda: convert au1k_ir to platform driver.
MIPS: Alchemy: remove unused board headers
MTD: nand: make au1550nd.c a platform_driver
MIPS: Netlogic: Mark Netlogic chips as SMT capable
MIPS: Netlogic: Add support for XLP 3XX cores
MIPS: Netlogic: Merge some of XLR/XLP wakup code
MIPS: Netlogic: Add default XLP config.
...
Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c,
traps.c} and drivers/tty/serial/Makefile
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
This patch adds USB OHCI driver for Samsung EXYNOS SoCs. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch adds support for EHCI compliant HSUSB Host controller found on Marvell Socs. It fits both OTG and SPH controller on marvell Socs, including PXA9xx/MMP2/MMP3/MGx. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
Also make the USB_EHCI_ATH79 selectable for the AR933X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Kathy Giori <kgiori@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2529/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This is mod_host prototype support for renesas_usbhs driver. It doesn't support USB-Hub, and USB-DMAC for now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
to make it look like OHCI and EHCI, we introduce that symbol and USB_XHCI_HCD depend on that instead of PCI. [bigeasy@linutronix.de: wire up USB_ARCH_HAS_HCD] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
the MACH_MX* macros are scheduled for removal, so just depend on ARCH_MXC instead. The Kconfig text makes it clear on which SoC the driver runs on. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>