linux-stable.git/drivers/usb/dwc2, branch v5.0 Linux kernel stable tree usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing 2019-01-17T13:56:53+00:00 Minas Harutyunyan minas.harutyunyan@synopsys.com 2018-12-12T12:44:32+00:00 87b6d2c56825c3119a0e64cc208ae6d795810a2e To clear GINTSTS2_WKUP_ALERT_INT bit in GINTSTS2 register require to write 1. This bit is implemented as "Write to clear". Fixes: 187c5298a122 ("usb: dwc2: gadget: Add handler for WkupAlert interrupt") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
To clear GINTSTS2_WKUP_ALERT_INT bit in GINTSTS2 register
require to write 1. This bit is implemented as "Write to clear".

Fixes: 187c5298a122 ("usb: dwc2: gadget: Add handler for WkupAlert interrupt")

Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: Fix disable all EP's on disconnect 2018-12-11T13:42:39+00:00 Minas Harutyunyan minas.harutyunyan@synopsys.com 2018-12-10T14:09:32+00:00 4fe4f9fecc36956fd53c8edf96dd0c691ef98ff9 Disabling all EP's allow to reset EP's to initial state. Introduced new function dwc2_hsotg_ep_disable_lock() which before calling dwc2_hsotg_ep_disable() function acquire hsotg->lock and release on exiting. From dwc2_hsotg_ep_disable() function removed acquiring hsotg->lock. In dwc2_hsotg_core_init_disconnected() function when USB reset interrupt asserted disabling all ep’s by dwc2_hsotg_ep_disable() function. This updates eliminating sparse imbalance warnings. Reverted changes in dwc2_hostg_disconnect() function. Introduced new function dwc2_hsotg_ep_disable_lock(). Changed dwc2_hsotg_ep_ops. Now disable point to dwc2_hsotg_ep_disable_lock() function. In functions dwc2_hsotg_udc_stop() and dwc2_hsotg_suspend() dwc2_hsotg_ep_disable() function replaced by dwc2_hsotg_ep_disable_lock() function. In dwc2_hsotg_ep_disable() function removed acquiring of hsotg->lock. Fixes: dccf1bad4be7 ("usb: dwc2: Disable all EP's on disconnect") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Disabling all EP's allow to reset EP's to initial state.
Introduced new function dwc2_hsotg_ep_disable_lock() which
before calling dwc2_hsotg_ep_disable() function acquire
hsotg->lock and release on exiting.
From dwc2_hsotg_ep_disable() function removed acquiring
hsotg->lock.
In dwc2_hsotg_core_init_disconnected() function when USB
reset interrupt asserted disabling all ep’s by
dwc2_hsotg_ep_disable() function.
This updates eliminating sparse imbalance warnings.

Reverted changes in dwc2_hostg_disconnect() function.
Introduced new function dwc2_hsotg_ep_disable_lock().
Changed dwc2_hsotg_ep_ops. Now disable point to
dwc2_hsotg_ep_disable_lock() function.
In functions dwc2_hsotg_udc_stop() and dwc2_hsotg_suspend()
dwc2_hsotg_ep_disable() function replaced by
dwc2_hsotg_ep_disable_lock() function.
In dwc2_hsotg_ep_disable() function removed acquiring
of hsotg->lock.

Fixes: dccf1bad4be7 ("usb: dwc2: Disable all EP's on disconnect")
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: disable power_down on Amlogic devices 2018-12-10T07:18:19+00:00 Martin Blumenstingl martin.blumenstingl@googlemail.com 2018-12-09T19:01:29+00:00 cc10ce0c51b13d1566d0ec1dcb472fb86330b391 Disable power_down by setting the parameter to DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic Meson SoCs where USB devices are only recognized when plugged in before booting Linux. A hot-plugged USB device was not detected even though the device got power (my USB thumb drive for example has an LED which lit up). A similar fix was implemented for Rockchip SoCs in commit c216765d3a1def ("usb: dwc2: disable power_down on rockchip devices"). That commit suggests that a change in the dwc2 driver is the cause because the default value for the "hibernate" parameter (which then got renamed to "power_down" to support other modes) was changed in the v4.17 merge window with: commit 6d23ee9caa6790 ("Merge tag 'usb-for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing"). Cc: <stable@vger.kernel.org> # 4.19 Acked-by: Minas Harutyunyan <hminas@synopsys.com> Suggested-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Disable power_down by setting the parameter to
DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic
Meson SoCs where USB devices are only recognized when plugged in before
booting Linux. A hot-plugged USB device was not detected even though the
device got power (my USB thumb drive for example has an LED which lit
up).

A similar fix was implemented for Rockchip SoCs in commit c216765d3a1def
("usb: dwc2: disable power_down on rockchip devices"). That commit
suggests that a change in the dwc2 driver is the cause because the
default value for the "hibernate" parameter (which then got renamed to
"power_down" to support other modes) was changed in the v4.17 merge
window with:
commit 6d23ee9caa6790 ("Merge tag 'usb-for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing").

Cc: <stable@vger.kernel.org> # 4.19
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: host: use hrtimer for NAK retries 2018-12-05T09:13:14+00:00 Terin Stock terin@terinstock.com 2018-09-10T04:24:31+00:00 6ed30a7d8ec29d3aba46e47aa8b4a44f077dda4e Modify the wait delay utilize the high resolution timer API to allow for more precisely scheduled callbacks. A previous commit added a 1ms retry delay after multiple consecutive NAKed transactions using jiffies. On systems with a low timer interrupt frequency, this delay may be significantly longer than specified, resulting in misbehavior with some USB devices. This scenario was reached on a Raspberry Pi 3B with a Macally FDD-USB floppy drive (identified as 0424:0fdc Standard Microsystems Corp. Floppy, based on the USB97CFDC USB FDC). With the relay delay, the drive would be unable to mount a disk, replying with NAKs until the device was reset. Using ktime, the delta between starting the timer (in dwc2_hcd_qh_add) and the callback function can be determined. With the original delay implementation, this value was consistently approximately 12ms. (output in us). <idle>-0 [000] ..s. 1600.559974: dwc2_wait_timer_fn: wait_timer delta: 11976 <idle>-0 [000] ..s. 1600.571974: dwc2_wait_timer_fn: wait_timer delta: 11977 <idle>-0 [000] ..s. 1600.583974: dwc2_wait_timer_fn: wait_timer delta: 11976 <idle>-0 [000] ..s. 1600.595974: dwc2_wait_timer_fn: wait_timer delta: 11977 After converting the relay delay to using a higher resolution timer, the delay was much closer to 1ms. <idle>-0 [000] d.h. 1956.553017: dwc2_wait_timer_fn: wait_timer delta: 1002 <idle>-0 [000] d.h. 1956.554114: dwc2_wait_timer_fn: wait_timer delta: 1002 <idle>-0 [000] d.h. 1957.542660: dwc2_wait_timer_fn: wait_timer delta: 1004 <idle>-0 [000] d.h. 1957.543701: dwc2_wait_timer_fn: wait_timer delta: 1002 The floppy drive operates properly with delays up to approximately 5ms, and sends NAKs for any delays that are longer. Fixes: 38d2b5fb75c1 ("usb: dwc2: host: Don't retry NAKed transactions right away") Cc: <stable@vger.kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Terin Stock <terin@terinstock.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Modify the wait delay utilize the high resolution timer API to allow for
more precisely scheduled callbacks.

A previous commit added a 1ms retry delay after multiple consecutive
NAKed transactions using jiffies. On systems with a low timer interrupt
frequency, this delay may be significantly longer than specified,
resulting in misbehavior with some USB devices.

This scenario was reached on a Raspberry Pi 3B with a Macally FDD-USB
floppy drive (identified as 0424:0fdc Standard Microsystems Corp.
Floppy, based on the USB97CFDC USB FDC). With the relay delay, the drive
would be unable to mount a disk, replying with NAKs until the device was
reset.

Using ktime, the delta between starting the timer (in dwc2_hcd_qh_add)
and the callback function can be determined. With the original delay
implementation, this value was consistently approximately 12ms. (output
in us).

    <idle>-0     [000] ..s.  1600.559974: dwc2_wait_timer_fn: wait_timer delta: 11976
    <idle>-0     [000] ..s.  1600.571974: dwc2_wait_timer_fn: wait_timer delta: 11977
    <idle>-0     [000] ..s.  1600.583974: dwc2_wait_timer_fn: wait_timer delta: 11976
    <idle>-0     [000] ..s.  1600.595974: dwc2_wait_timer_fn: wait_timer delta: 11977

After converting the relay delay to using a higher resolution timer, the
delay was much closer to 1ms.

    <idle>-0     [000] d.h.  1956.553017: dwc2_wait_timer_fn: wait_timer delta: 1002
    <idle>-0     [000] d.h.  1956.554114: dwc2_wait_timer_fn: wait_timer delta: 1002
    <idle>-0     [000] d.h.  1957.542660: dwc2_wait_timer_fn: wait_timer delta: 1004
    <idle>-0     [000] d.h.  1957.543701: dwc2_wait_timer_fn: wait_timer delta: 1002

The floppy drive operates properly with delays up to approximately 5ms,
and sends NAKs for any delays that are longer.

Fixes: 38d2b5fb75c1 ("usb: dwc2: host: Don't retry NAKed transactions right away")
Cc: <stable@vger.kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Terin Stock <terin@terinstock.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: Disable power down feature on Samsung SoCs 2018-12-05T09:09:08+00:00 Marek Szyprowski m.szyprowski@samsung.com 2018-11-20T15:38:15+00:00 35a6054132286a4ab92b536595093b82e6bdfcbc Power down feature of DWC2 module integrated in Samsung SoCs doesn't work properly or needs some additional handling in PHY or SoC glue layer, so disable it for now. Without disabling power down, DWC2 causes random memory trashes and fails enumeration if there is no USB link to host on driver probe. Fixes: 03ea6d6e9e1ff1 ("usb: dwc2: Enable power down") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Power down feature of DWC2 module integrated in Samsung SoCs doesn't work
properly or needs some additional handling in PHY or SoC glue layer, so
disable it for now. Without disabling power down, DWC2 causes random memory
trashes and fails enumeration if there is no USB link to host on driver
probe.

Fixes: 03ea6d6e9e1ff1 ("usb: dwc2: Enable power down")
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: gadget: Accept LPM token when TxFIFO is not empty 2018-11-26T07:06:32+00:00 Artur Petrosyan arthur.petrosyan@synopsys.com 2018-11-02T15:29:55+00:00 9aed8c08c82d8498769119b73358d070a7cbb54c Set GLPMCFG_LPM_ACCEPT_CTRL_ISOC bit in GLPMCFG register to accept LPM token during ISOC transfers when TxFIFO is not empty. - Added two definitions. #define GLPMCFG_LPM_ACCEPT_CTRL_CONTROL BIT(21) #define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22) This patch uses GLPMCFG_LPM_ACCEPT_CTRL_ISOC. GLPMCFG_LPM_ACCEPT_CTRL_CONTROL is defined for further use. - Added setting GLPMCFG_LPM_ACCEPT_CTRL_ISOC bit in GLPMCFG register in dwc2_gadget_init_lpm function. Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Set GLPMCFG_LPM_ACCEPT_CTRL_ISOC bit in GLPMCFG register
to accept LPM token during ISOC transfers when TxFIFO is
not empty.

- Added two definitions.
  	#define GLPMCFG_LPM_ACCEPT_CTRL_CONTROL        BIT(21)
  	#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC   BIT(22)
  This patch uses GLPMCFG_LPM_ACCEPT_CTRL_ISOC.
  GLPMCFG_LPM_ACCEPT_CTRL_CONTROL is defined for further use.

- Added setting GLPMCFG_LPM_ACCEPT_CTRL_ISOC bit in GLPMCFG
  register in dwc2_gadget_init_lpm function.

Signed-off-by: Artur Petrosyan <arturp@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: gadget: Fix WkupAlert interrupt handler. 2018-11-26T07:06:32+00:00 Artur Petrosyan arthur.petrosyan@synopsys.com 2018-11-02T15:29:48+00:00 d64bc8ee92856e39b3150d93e244ca8239ae6ada According to the databook DCTL_RMTWKUPSIG bit is defined in DCTL register not in DCFG. Updated setting DCTL_RMTWKUPSIG bit to DCTL register. Fixes: 187c5298a122 ("usb: dwc2: gadget: Add handler for WkupAlert interrupt") Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
According to the databook DCTL_RMTWKUPSIG bit
is defined in DCTL register not in DCFG.

Updated setting DCTL_RMTWKUPSIG bit to DCTL
register.

Fixes: 187c5298a122 ("usb: dwc2: gadget: Add handler for WkupAlert interrupt")

Signed-off-by: Artur Petrosyan <arturp@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: pci: Fix an error code in probe 2018-11-14T09:07:12+00:00 Dan Carpenter dan.carpenter@oracle.com 2018-10-18T07:36:47+00:00 3c135e8900199e3b9375c1eff808cceba2ee37de We added some error handling to this function but forgot to set the error code on this path. Fixes: ecd29dabb2ba ("usb: dwc2: pci: Handle error cleanup in probe") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
We added some error handling to this function but forgot to set the
error code on this path.

Fixes: ecd29dabb2ba ("usb: dwc2: pci: Handle error cleanup in probe")
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: disable power_down on rockchip devices 2018-10-05T07:50:14+00:00 SolidHal hal@halemmerich.com 2018-10-03T01:58:16+00:00 c216765d3a1defda5e7e2dabd878f99f0cd2ebf2 The bug would let the usb controller enter partial power down, which was formally known as hibernate, upon boot if nothing was plugged in to the port. Partial power down couldn't be exited properly, so any usb devices plugged in after boot would not be usable. Before the name change, params.hibernation was false by default, so _dwc2_hcd_suspend() would skip entering hibernation. With the rename, _dwc2_hcd_suspend() was changed to use params.power_down to decide whether or not to enter partial power down. Since params.power_down is non-zero by default, it needs to be set to 0 for rockchip devices to restore functionality. This bug was reported in the linux-usb thread: REGRESSION: usb: dwc2: USB device not seen after boot The commit that caused this regression is: 6d23ee9caa6790aea047f9aca7f3c03cb8d96eb6 Signed-off-by: SolidHal <hal@halemmerich.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
 The bug would let the usb controller enter partial power down,
 which was formally known as hibernate, upon boot if nothing was plugged
 in to the port. Partial power down couldn't be exited properly, so any
 usb devices plugged in after boot would not be usable.

 Before the name change, params.hibernation was false by default, so
 _dwc2_hcd_suspend() would skip entering hibernation. With the
 rename, _dwc2_hcd_suspend() was changed to use  params.power_down
 to decide whether or not to enter partial power down.

 Since params.power_down is non-zero by default, it needs to be set
 to 0 for rockchip devices to restore functionality.

 This bug was reported in the linux-usb thread:
 REGRESSION: usb: dwc2: USB device not seen after boot

 The commit that caused this regression is:
6d23ee9caa6790aea047f9aca7f3c03cb8d96eb6

Signed-off-by: SolidHal <hal@halemmerich.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: gadget: Add handler for WkupAlert interrupt 2018-10-02T07:50:43+00:00 Grigor Tovmasyan Grigor.Tovmasyan@synopsys.com 2018-08-29T17:02:57+00:00 187c5298a12292eab55e3eb09e70e2b145646bcc Added interrupt handler for WkupAlert interrupt. This interrupt should initiate Remote Wake up. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Added interrupt handler for WkupAlert interrupt.

This interrupt should initiate Remote Wake up.

Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>