linux-stable.git/drivers/usb/dwc2, branch v4.8 Linux kernel stable tree usb: dwc2: Add reset control to dwc2 2016-08-22T07:45:11+00:00 Dinh Nguyen dinguyen@opensource.altera.com 2016-08-10T13:53:34+00:00 83f8da562f8b5275fa1095b45762996971f7c607 Allow for platforms that have a reset controller driver in place to bring the USB IP out of reset. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Allow for platforms that have a reset controller driver in place to bring
the USB IP out of reset.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
USB: dwc2-usb: add USB_GADGET dependency 2016-06-29T08:11:41+00:00 Arnd Bergmann arnd@arndb.de 2016-06-24T07:30:26+00:00 e43470dbdfe8922f9b2962184336efaa71e59727 The driver selects NOP_USB_XCEIV, which can only be built-in if USB_GADGET is either disabled or also built-in, so with USB_DWC2_PCI=y and USB_GADGET=m, NOP_USB_XCEIV is also built-in and we get this link error: drivers/usb/built-in.o: In function `nop_set_peripheral': (text+0x1927c): undefined reference to `usb_gadget_vbus_connect' drivers/usb/built-in.o: In function `nop_gpio_vbus_thread': (text+0x197a0): undefined reference to `usb_gadget_vbus_connect' (text+0x19830): undefined reference to `usb_gadget_vbus_disconnect' This adds the same dependency for the dwc2 driver to avoid that broken configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
The driver selects NOP_USB_XCEIV, which can only be built-in if
USB_GADGET is either disabled or also built-in, so with USB_DWC2_PCI=y
and USB_GADGET=m, NOP_USB_XCEIV is also built-in and we get this link
error:

drivers/usb/built-in.o: In function `nop_set_peripheral':
(text+0x1927c): undefined reference to `usb_gadget_vbus_connect'
drivers/usb/built-in.o: In function `nop_gpio_vbus_thread':
(text+0x197a0): undefined reference to `usb_gadget_vbus_connect'
(text+0x19830): undefined reference to `usb_gadget_vbus_disconnect'

This adds the same dependency for the dwc2 driver to avoid that
broken configuration.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: add printf attribute to cat_printf() 2016-06-29T08:11:07+00:00 Nicolas Iooss nicolas.iooss_linux@m4x.org 2016-06-26T08:12:38+00:00 e135ab7405f562c7709806e355b1521ee68548dc As cat_printf() uses printf format strings in its parameters, adding __printf attribute allows the compiler to detect at compile-time some errors related to format strings (with -Wformat warning flag). Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
As cat_printf() uses printf format strings in its parameters, adding
__printf attribute allows the compiler to detect at compile-time some
errors related to format strings (with -Wformat warning flag).

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: gadget: Final fixes for BDMA ISOC 2016-06-21T07:50:16+00:00 Vardan Mikayelyan mvardan@synopsys.com 2016-05-26T01:07:22+00:00 837e9f00bf9966d64abc1bce678271099a72423b Done fixes and tested hsotg gadget's BDMA mode. Tested Control, Bulk, Isoc, Inter transfers. Added code for isoc transfers, removed unusable code, done minor fixes. Affected functions and IRQ handlers: - dwc2_hsotg_start_req(), - dwc2_hsotg_ep_enable(), - dwc2_hsotg_ep_queue(), - dwc2_hsotg_handle_outdone(), - GINTSTS_GOUTNAKEFF handler, Removed 'has_correct_parity' flag from 'dwc2_hsotg_ep' struct. Before this patch series, to set the data pid the DWC2 gadget driver was toggling the even/odd until it match, then were leaving it set. But now I have added mechanism to set pid and excluded all code where this flag was set. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Done fixes and tested hsotg gadget's BDMA mode. Tested Control,
Bulk, Isoc, Inter transfers. Added code for isoc transfers,
removed unusable code, done minor fixes. Affected functions
and IRQ handlers:
- dwc2_hsotg_start_req(),
- dwc2_hsotg_ep_enable(),
- dwc2_hsotg_ep_queue(),
- dwc2_hsotg_handle_outdone(),
- GINTSTS_GOUTNAKEFF handler,

Removed 'has_correct_parity' flag from 'dwc2_hsotg_ep' struct.
Before this patch series, to set the data pid the DWC2 gadget
driver was toggling the even/odd until it match, then were
leaving it set. But now I have added mechanism to set pid and
excluded all code where this flag was set.

Tested-by: John Keeping <john@metanate.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: gadget: Add EP disabled interrupt handler 2016-06-21T07:50:09+00:00 Vardan Mikayelyan mvardan@synopsys.com 2016-05-26T01:07:19+00:00 bd9971f0a1efe4b3ac6e2f8ec864c75f73ca7829 Reimplemented EP disabled interrupt handler and moved to corresponding function. This interrupt indicates that the endpoint has been disabled per the application's request. For IN endpoints flushes txfifo, in case of BULK clears DCTL_CGNPINNAK, in case of ISOC completes current request. For ISOC-OUT endpoints completes expired requests. If there is remaining request starts it. This is the part of ISOC-OUT transfer drop flow. When ISOC-OUT transfer expired we must disable ep to drop ongoing transfer. Tested-by: John Keeping <john@metanate.com> Reviewed-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Reimplemented EP disabled interrupt handler and moved to
corresponding function.

This interrupt indicates that the endpoint has been disabled per
the application's request.

For IN endpoints flushes txfifo, in case of BULK clears DCTL_CGNPINNAK,
in case of ISOC completes current request.

For ISOC-OUT endpoints completes expired requests. If there is
remaining request starts it. This is the part of ISOC-OUT transfer
drop flow. When ISOC-OUT transfer expired we must disable ep to drop
ongoing transfer.

Tested-by: John Keeping <john@metanate.com>
Reviewed-by: Vahram Aharonyan <vahrama@synopsys.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: gadget: Add Incomplete ISO IN/OUT Interrupt handlers 2016-06-21T07:50:00+00:00 Vardan Mikayelyan mvardan@synopsys.com 2016-05-26T01:07:17+00:00 381fc8f8228923026b3d75c8230fa2ee4d688f32 Incomplete ISO IN interrupt indicates one of the following conditions occurred while transmitting an ISOC transaction. - Corrupted IN Token for ISOC EP. - Packet not complete in FIFO. Incomplete ISO OUT indicates that there is at least one isochronous OUT endpoint on which the transfer is not completed in the current microframe. The following actions will be taken: In case of EP-IN - Determine the EP - Disable EP directly from this handler; when "Endpoint Disabled" interrupt is received flush FIFO In case of EP-OUT - Determine the EP - If target frame elapsed set DCTL_SGOUTNAK, unmask GOUTNAKEFF and proceed as described in section 7.5.1 of DWC-HSOTG Programming Guide Also added dwc2_gadget_target_frame_elapsed() helper function which will be used in Incomplete ISO IN/OUT Interrupt handlers. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Incomplete ISO IN interrupt indicates one of the following conditions
occurred while transmitting an ISOC transaction.
- Corrupted IN Token for ISOC EP.
- Packet not complete in FIFO.

Incomplete ISO OUT indicates that there is at least one isochronous OUT
endpoint on which the transfer is not completed in the current
microframe.

The following actions will be taken:

In case of EP-IN
- Determine the EP
- Disable EP directly from this handler; when "Endpoint Disabled"
  interrupt is received flush FIFO

In case of EP-OUT
- Determine the EP
- If target frame elapsed set DCTL_SGOUTNAK, unmask GOUTNAKEFF and
  proceed as described in section 7.5.1 of DWC-HSOTG Programming Guide

Also added dwc2_gadget_target_frame_elapsed() helper function which
will be used in Incomplete ISO IN/OUT Interrupt handlers.

Tested-by: John Keeping <john@metanate.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: gadget: Add OUTTKNEPDIS and NAKINTRPT handlers 2016-06-21T07:49:54+00:00 Vardan Mikayelyan mvardan@synopsys.com 2016-05-26T01:07:14+00:00 5321922cb6fa0f513fdd8ce73b281f4b9957886b NAKINTRPT interrupt is starting point for isoc-in transfer, synchronization done with first in token received from host, core asserts this interrupt when responds with 0 length data to in token, received from host. The first IN token is asynchronous for device - device does not know when first one token will arrive from host. On first token arrival HW generates 2 interrupts: 'in token received while FIFO empty' and 'NAK'. NAK interrupt for ISOC in means that token has arrived and ZLP was sent in response to that as there was no data in FIFO. SW is basing on this interrupt to obtain frame in which token has come and then based on the interval calculates next frame for transfer. OUTTKNEPDIS interrupt is starting point for isoc-out transfer, synchronization done with first out token received from host while corresponding ep is disabled. For OUTs the reason is same - device does not know initial frame in which out token will come. For this HW generates OUTTKNEPDIS - out token is received while EP is disabled. Upon getting this interrupt SW starts calculation for next transfer frame. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
NAKINTRPT interrupt is starting point for isoc-in transfer,
synchronization done with first in token received from host,
core asserts this interrupt when responds with 0 length data
to in token, received from host.

The first IN token is asynchronous for device - device does not
know when first one token will arrive from host. On first token
arrival HW generates 2 interrupts: 'in token received while FIFO
empty' and 'NAK'. NAK interrupt for ISOC in means that token has
arrived and ZLP was sent in response to that as there was no data
in FIFO. SW is basing on this interrupt to obtain frame in which
token has come and then based on the interval calculates next
frame for transfer.

OUTTKNEPDIS interrupt is starting point for isoc-out transfer,
synchronization done with first out token received from host
while corresponding ep is disabled.

For OUTs the reason is same - device does not know initial frame
in which out token will come. For this HW generates OUTTKNEPDIS
- out token is received while EP is disabled. Upon getting this
interrupt SW starts calculation for next transfer frame.

Tested-by: John Keeping <john@metanate.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: gadget: Add dwc2_gadget_start_next_request function 2016-06-21T07:49:47+00:00 Vardan Mikayelyan mvardan@synopsys.com 2016-05-26T01:07:12+00:00 41cc4cd2716fa6d18a1a09d740ea075adecfa7dd Replaced repeating code with function call. Starts next request from ep queue. If queue is empty and ep is isoc -In case of OUT-EP unmasks OUTTKNEPDIS. OUTTKNEPDIS is masked in it's handler, so we need to unmask it here to be able to do resynchronization. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Replaced repeating code with function call.

Starts next request from ep queue.
If queue is empty and ep is isoc
-In case of OUT-EP unmasks OUTTKNEPDIS.

OUTTKNEPDIS is masked in it's handler, so we need to unmask it here
to be able to do resynchronization.

Tested-by: John Keeping <john@metanate.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: gadget: Add dwc2_gadget_read_ep_interrupts function 2016-06-21T07:49:37+00:00 Vardan Mikayelyan mvardan@synopsys.com 2016-05-26T01:07:10+00:00 326015887b6a1321fd61f7a16816241ad841a03c Reads and returns interrupts for given endpoint, by masking epint_reg with corresponding mask. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Reads and returns interrupts for given endpoint, by masking epint_reg
with corresponding mask.

Tested-by: John Keeping <john@metanate.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: dwc2: gadget: Corrected interval calculation 2016-06-21T07:49:29+00:00 Vardan Mikayelyan mvardan@synopsys.com 2016-05-26T01:07:07+00:00 142bd33fcd185d850178f7f8697ecbeaaa18e257 Calculate the interval according to the USB 2.0 specification section 9.6.6. Tested-by: John Keeping <john@metanate.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
Calculate the interval according to the USB 2.0 specification section
9.6.6.

Tested-by: John Keeping <john@metanate.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>