linux-stable.git/drivers/usb/dwc2, branch linux-5.4.y Linux kernel stable tree usb: dwc2: gadget: remove of_node reference upon udc_stop 2025-03-13T11:43:14+00:00 Fabrice Gasnier fabrice.gasnier@foss.st.com 2025-01-24T17:33:25+00:00 1c231617ac1c0e41212ce05cfda97ab3271dcfd3 commit 58cd423820d5b5610977e55e4acdd06628829ede upstream. In dwc2_hsotg_udc_start(), e.g. when binding composite driver, "of_node" is set to hsotg->dev->of_node. It causes errors when binding the gadget driver several times, on stm32mp157c-ev1 board. Below error is seen: "pin PA10 already requested by 49000000.usb-otg; cannot claim for gadget.0" The first time, no issue is seen as when registering the driver, of_node isn't NULL: -> gadget_dev_desc_UDC_store -> usb_gadget_register_driver_owner -> driver_register ... -> really_probe -> pinctrl_bind_pins (no effect) Then dwc2_hsotg_udc_start() sets of_node. The second time (stop the gadget, reconfigure it, then start it again), of_node has been set, so the probing code tries to acquire pins for the gadget. These pins are hold by the controller, hence the error. So clear gadget.dev.of_node in udc_stop() routine to avoid the issue. Fixes: 7d7b22928b90 ("usb: gadget: s3c-hsotg: Propagate devicetree to gadget drivers") Cc: stable <stable@kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20250124173325.2747710-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 58cd423820d5b5610977e55e4acdd06628829ede upstream.

In dwc2_hsotg_udc_start(), e.g. when binding composite driver, "of_node"
is set to hsotg->dev->of_node.

It causes errors when binding the gadget driver several times, on
stm32mp157c-ev1 board. Below error is seen:
"pin PA10 already requested by 49000000.usb-otg; cannot claim for gadget.0"

The first time, no issue is seen as when registering the driver, of_node
isn't NULL:
-> gadget_dev_desc_UDC_store
  -> usb_gadget_register_driver_owner
    -> driver_register
    ...
      -> really_probe -> pinctrl_bind_pins (no effect)

Then dwc2_hsotg_udc_start() sets of_node.

The second time (stop the gadget, reconfigure it, then start it again),
of_node has been set, so the probing code tries to acquire pins for the
gadget. These pins are hold by the controller, hence the error.

So clear gadget.dev.of_node in udc_stop() routine to avoid the issue.

Fixes: 7d7b22928b90 ("usb: gadget: s3c-hsotg: Propagate devicetree to gadget drivers")
Cc: stable <stable@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250124173325.2747710-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc2: gadget: Don't write invalid mapped sg entries into dma_desc with iommu enabled 2025-01-09T12:23:26+00:00 Peng Hongchi hongchi.peng@siengine.com 2024-07-28T16:10:22+00:00 f413230a1ff12c32048bf0ed957b17fdb4e97fda [ Upstream commit 1134289b6b93d73721340b66c310fd985385e8fa ] When using dma_map_sg() to map the scatterlist with iommu enabled, the entries in the scatterlist can be mergerd into less but longer entries in the function __finalise_sg(). So that the number of valid mapped entries is actually smaller than ureq->num_reqs,and there are still some invalid entries in the scatterlist with dma_addr=0xffffffff and len=0. Writing these invalid sg entries into the dma_desc can cause a data transmission error. The function dma_map_sg() returns the number of valid map entries and the return value is assigned to usb_request::num_mapped_sgs in function usb_gadget_map_request_by_dev(). So that just write valid mapped entries into dma_desc according to the usb_request::num_mapped_sgs, and set the IOC bit if it's the last valid mapped entry. This patch poses no risk to no-iommu situation, cause ureq->num_mapped_sgs equals ureq->num_sgs while using dma_direct_map_sg() to map the scatterlist whith iommu disabled. Signed-off-by: Peng Hongchi <hongchi.peng@siengine.com> Link: https://lore.kernel.org/r/20240523100315.7226-1-hongchi.peng@siengine.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1134289b6b93d73721340b66c310fd985385e8fa ]

When using dma_map_sg() to map the scatterlist with iommu enabled,
the entries in the scatterlist can be mergerd into less but longer
entries in the function __finalise_sg(). So that the number of
valid mapped entries is actually smaller than ureq->num_reqs,and
there are still some invalid entries in the scatterlist with
dma_addr=0xffffffff and len=0. Writing these invalid sg entries
into the dma_desc can cause a data transmission error.

The function dma_map_sg() returns the number of valid map entries
and the return value is assigned to usb_request::num_mapped_sgs in
function usb_gadget_map_request_by_dev(). So that just write valid
mapped entries into dma_desc according to the usb_request::num_mapped_sgs,
and set the IOC bit if it's the last valid mapped entry.

This patch poses no risk to no-iommu situation, cause
ureq->num_mapped_sgs equals ureq->num_sgs while using dma_direct_map_sg()
to map the scatterlist whith iommu disabled.

Signed-off-by: Peng Hongchi <hongchi.peng@siengine.com>
Link: https://lore.kernel.org/r/20240523100315.7226-1-hongchi.peng@siengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature 2024-12-19T17:05:02+00:00 Stefan Wahren wahrenst@gmx.net 2024-12-02T00:16:30+00:00 2da6e4d35dff2f0d34775058d72cd0141987ee48 commit a8d3e4a734599c7d0f6735f8db8a812e503395dd upstream. On Rasperry Pis without onboard USB hub the power cycle during power connect init only disable the port but never enabled it again: usb usb1-port1: attempt power cycle The port relevant part in dwc2_hcd_hub_control() is skipped in case port_connect_status = 0 under the assumption the core is or will be soon in device mode. But this assumption is wrong, because after ClearPortFeature USB_PORT_FEAT_POWER the port_connect_status will also be 0 and SetPortFeature (incl. USB_PORT_FEAT_POWER) will be a no-op. Fix the behavior of dwc2_hcd_hub_control() by replacing the port_connect_status check with dwc2_is_device_mode(). Link: https://github.com/raspberrypi/linux/issues/6247 Fixes: 7359d482eb4d ("staging: HCD files for the DWC2 driver") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20241202001631.75473-3-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a8d3e4a734599c7d0f6735f8db8a812e503395dd upstream.

On Rasperry Pis without onboard USB hub the power cycle during
power connect init only disable the port but never enabled it again:

  usb usb1-port1: attempt power cycle

The port relevant part in dwc2_hcd_hub_control() is skipped in case
port_connect_status = 0 under the assumption the core is or will be soon
in device mode. But this assumption is wrong, because after ClearPortFeature
USB_PORT_FEAT_POWER the port_connect_status will also be 0 and
SetPortFeature (incl. USB_PORT_FEAT_POWER) will be a no-op.

Fix the behavior of dwc2_hcd_hub_control() by replacing the
port_connect_status check with dwc2_is_device_mode().

Link: https://github.com/raspberrypi/linux/issues/6247
Fixes: 7359d482eb4d ("staging: HCD files for the DWC2 driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20241202001631.75473-3-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario 2024-11-08T15:20:44+00:00 Shawn Shao shawn.shao@jaguarmicro.com 2024-08-30T03:17:09+00:00 0547f710d853bd2529969c6279c58f55f33b059a [ Upstream commit 4058c39bd176daf11a826802d940d86292a6b02b ] The issue is that before entering the crash kernel, the DWC USB controller did not perform operations such as resetting the interrupt mask bits. After entering the crash kernel,before the USB interrupt handler registration was completed while loading the DWC USB driver,an GINTSTS_SOF interrupt was received.This triggered the misroute_irq process within the GIC handling framework,ultimately leading to the misrouting of the interrupt,causing it to be handled by the wrong interrupt handler and resulting in the issue. Summary:In a scenario where the kernel triggers a panic and enters the crash kernel,it is necessary to ensure that the interrupt mask bit is not enabled before the interrupt registration is complete. If an interrupt reaches the CPU at this moment,it will certainly not be handled correctly,especially in cases where this interrupt is reported frequently. Please refer to the Crashkernel dmesg information as follows (the message on line 3 was added before devm_request_irq is called by the dwc2_driver_probe function): [ 5.866837][ T1] dwc2 JMIC0010:01: supply vusb_d not found, using dummy regulator [ 5.874588][ T1] dwc2 JMIC0010:01: supply vusb_a not found, using dummy regulator [ 5.882335][ T1] dwc2 JMIC0010:01: before devm_request_irq irq: [71], gintmsk[0xf300080e], gintsts[0x04200009] [ 5.892686][ C0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-jmnd1.2_RC #18 [ 5.900327][ C0] Hardware name: CMSS HyperCard4-25G/HyperCard4-25G, BIOS 1.6.4 Jul 8 2024 [ 5.908836][ C0] Call trace: [ 5.911965][ C0] dump_backtrace+0x0/0x1f0 [ 5.916308][ C0] show_stack+0x20/0x30 [ 5.920304][ C0] dump_stack+0xd8/0x140 [ 5.924387][ C0] pcie_xxx_handler+0x3c/0x1d8 [ 5.930121][ C0] __handle_irq_event_percpu+0x64/0x1e0 [ 5.935506][ C0] handle_irq_event+0x80/0x1d0 [ 5.940109][ C0] try_one_irq+0x138/0x174 [ 5.944365][ C0] misrouted_irq+0x134/0x140 [ 5.948795][ C0] note_interrupt+0x1d0/0x30c [ 5.953311][ C0] handle_irq_event+0x13c/0x1d0 [ 5.958001][ C0] handle_fasteoi_irq+0xd4/0x260 [ 5.962779][ C0] __handle_domain_irq+0x88/0xf0 [ 5.967555][ C0] gic_handle_irq+0x9c/0x2f0 [ 5.971985][ C0] el1_irq+0xb8/0x140 [ 5.975807][ C0] __setup_irq+0x3dc/0x7cc [ 5.980064][ C0] request_threaded_irq+0xf4/0x1b4 [ 5.985015][ C0] devm_request_threaded_irq+0x80/0x100 [ 5.990400][ C0] dwc2_driver_probe+0x1b8/0x6b0 [ 5.995178][ C0] platform_drv_probe+0x5c/0xb0 [ 5.999868][ C0] really_probe+0xf8/0x51c [ 6.004125][ C0] driver_probe_device+0xfc/0x170 [ 6.008989][ C0] device_driver_attach+0xc8/0xd0 [ 6.013853][ C0] __driver_attach+0xe8/0x1b0 [ 6.018369][ C0] bus_for_each_dev+0x7c/0xdc [ 6.022886][ C0] driver_attach+0x2c/0x3c [ 6.027143][ C0] bus_add_driver+0xdc/0x240 [ 6.031573][ C0] driver_register+0x80/0x13c [ 6.036090][ C0] __platform_driver_register+0x50/0x5c [ 6.041476][ C0] dwc2_platform_driver_init+0x24/0x30 [ 6.046774][ C0] do_one_initcall+0x50/0x25c [ 6.051291][ C0] do_initcall_level+0xe4/0xfc [ 6.055894][ C0] do_initcalls+0x80/0xa4 [ 6.060064][ C0] kernel_init_freeable+0x198/0x240 [ 6.065102][ C0] kernel_init+0x1c/0x12c Signed-off-by: Shawn Shao <shawn.shao@jaguarmicro.com> Link: https://lore.kernel.org/r/20240830031709.134-1-shawn.shao@jaguarmicro.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4058c39bd176daf11a826802d940d86292a6b02b ]

The issue is that before entering the crash kernel, the DWC USB controller
did not perform operations such as resetting the interrupt mask bits.
After entering the crash kernel,before the USB interrupt handler
registration was completed while loading the DWC USB driver,an GINTSTS_SOF
interrupt was received.This triggered the misroute_irq process within the
GIC handling framework,ultimately leading to the misrouting of the
interrupt,causing it to be handled by the wrong interrupt handler
and resulting in the issue.

Summary:In a scenario where the kernel triggers a panic and enters
the crash kernel,it is necessary to ensure that the interrupt mask
bit is not enabled before the interrupt registration is complete.
If an interrupt reaches the CPU at this moment,it will certainly
not be handled correctly,especially in cases where this interrupt
is reported frequently.

Please refer to the Crashkernel dmesg information as follows
(the message on line 3 was added before devm_request_irq is
called by the dwc2_driver_probe function):
[    5.866837][    T1] dwc2 JMIC0010:01: supply vusb_d not found, using dummy regulator
[    5.874588][    T1] dwc2 JMIC0010:01: supply vusb_a not found, using dummy regulator
[    5.882335][    T1] dwc2 JMIC0010:01: before devm_request_irq  irq: [71], gintmsk[0xf300080e], gintsts[0x04200009]
[    5.892686][    C0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-jmnd1.2_RC #18
[    5.900327][    C0] Hardware name: CMSS HyperCard4-25G/HyperCard4-25G, BIOS 1.6.4 Jul  8 2024
[    5.908836][    C0] Call trace:
[    5.911965][    C0]  dump_backtrace+0x0/0x1f0
[    5.916308][    C0]  show_stack+0x20/0x30
[    5.920304][    C0]  dump_stack+0xd8/0x140
[    5.924387][    C0]  pcie_xxx_handler+0x3c/0x1d8
[    5.930121][    C0]  __handle_irq_event_percpu+0x64/0x1e0
[    5.935506][    C0]  handle_irq_event+0x80/0x1d0
[    5.940109][    C0]  try_one_irq+0x138/0x174
[    5.944365][    C0]  misrouted_irq+0x134/0x140
[    5.948795][    C0]  note_interrupt+0x1d0/0x30c
[    5.953311][    C0]  handle_irq_event+0x13c/0x1d0
[    5.958001][    C0]  handle_fasteoi_irq+0xd4/0x260
[    5.962779][    C0]  __handle_domain_irq+0x88/0xf0
[    5.967555][    C0]  gic_handle_irq+0x9c/0x2f0
[    5.971985][    C0]  el1_irq+0xb8/0x140
[    5.975807][    C0]  __setup_irq+0x3dc/0x7cc
[    5.980064][    C0]  request_threaded_irq+0xf4/0x1b4
[    5.985015][    C0]  devm_request_threaded_irq+0x80/0x100
[    5.990400][    C0]  dwc2_driver_probe+0x1b8/0x6b0
[    5.995178][    C0]  platform_drv_probe+0x5c/0xb0
[    5.999868][    C0]  really_probe+0xf8/0x51c
[    6.004125][    C0]  driver_probe_device+0xfc/0x170
[    6.008989][    C0]  device_driver_attach+0xc8/0xd0
[    6.013853][    C0]  __driver_attach+0xe8/0x1b0
[    6.018369][    C0]  bus_for_each_dev+0x7c/0xdc
[    6.022886][    C0]  driver_attach+0x2c/0x3c
[    6.027143][    C0]  bus_add_driver+0xdc/0x240
[    6.031573][    C0]  driver_register+0x80/0x13c
[    6.036090][    C0]  __platform_driver_register+0x50/0x5c
[    6.041476][    C0]  dwc2_platform_driver_init+0x24/0x30
[    6.046774][    C0]  do_one_initcall+0x50/0x25c
[    6.051291][    C0]  do_initcall_level+0xe4/0xfc
[    6.055894][    C0]  do_initcalls+0x80/0xa4
[    6.060064][    C0]  kernel_init_freeable+0x198/0x240
[    6.065102][    C0]  kernel_init+0x1c/0x12c

Signed-off-by: Shawn Shao <shawn.shao@jaguarmicro.com>
Link: https://lore.kernel.org/r/20240830031709.134-1-shawn.shao@jaguarmicro.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: dwc2: host: Fix dereference issue in DDMA completion flow. 2024-05-02T14:18:32+00:00 Minas Harutyunyan Minas.Harutyunyan@synopsys.com 2024-04-09T12:27:54+00:00 75bf5e78b2a27cb1bca6fa826e3ab685015165e1 commit eed04fa96c48790c1cce73c8a248e9d460b088f8 upstream. Fixed variable dereference issue in DDMA completion flow. Fixes: b258e4268850 ("usb: dwc2: host: Fix ISOC flow in DDMA mode") CC: stable@vger.kernel.org Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-usb/2024040834-ethically-rumble-701f@gregkh/T/#m4c4b83bef0ebb4b67fe2e0a7d6466cbb6f416e39 Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/cc826d3ef53c934d8e6d98870f17f3cdc3d2755d.1712665387.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit eed04fa96c48790c1cce73c8a248e9d460b088f8 upstream.

Fixed variable dereference issue in DDMA completion flow.

Fixes: b258e4268850 ("usb: dwc2: host: Fix ISOC flow in DDMA mode")
CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-usb/2024040834-ethically-rumble-701f@gregkh/T/#m4c4b83bef0ebb4b67fe2e0a7d6466cbb6f416e39
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/cc826d3ef53c934d8e6d98870f17f3cdc3d2755d.1712665387.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc2: gadget: LPM flow fix 2024-04-13T10:51:32+00:00 Minas Harutyunyan Minas.Harutyunyan@synopsys.com 2024-03-13T09:22:13+00:00 a79ac9f3da0ce189a10e10c5ebffb7db4737875d commit 5d69a3b54e5a630c90d82a4c2bdce3d53dc78710 upstream. Added functionality to exit from L1 state by device initiation using remote wakeup signaling, in case when function driver queuing request while core in L1 state. Fixes: 273d576c4d41 ("usb: dwc2: gadget: Add functionality to exit from LPM L1 state") Fixes: 88b02f2cb1e1 ("usb: dwc2: Add core state checking") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/b4d9de5382375dddbf7ef6049d9a82066ad87d5d.1710166393.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5d69a3b54e5a630c90d82a4c2bdce3d53dc78710 upstream.

Added functionality to exit from L1 state by device initiation
using remote wakeup signaling, in case when function driver queuing
request while core in L1 state.

Fixes: 273d576c4d41 ("usb: dwc2: gadget: Add functionality to exit from LPM L1 state")
Fixes: 88b02f2cb1e1 ("usb: dwc2: Add core state checking")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/b4d9de5382375dddbf7ef6049d9a82066ad87d5d.1710166393.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc2: host: Fix ISOC flow in DDMA mode 2024-04-13T10:51:32+00:00 Minas Harutyunyan Minas.Harutyunyan@synopsys.com 2024-03-13T09:21:32+00:00 693bbbccd9c774adacaf03ae9fcbb33b66b1ffc4 commit b258e42688501cadb1a6dd658d6f015df9f32d8f upstream. Fixed ISOC completion flow in DDMA mode. Added isoc descriptor actual length value and update urb's start_frame value. Fixed initialization of ISOC DMA descriptors flow. Fixes: 56f5b1cff22a ("staging: Core files for the DWC2 driver") Fixes: 20f2eb9c4cf8 ("staging: dwc2: add microframe scheduler from downstream Pi kernel") Fixes: c17b337c1ea4 ("usb: dwc2: host: program descriptor for next frame") Fixes: dc4c76e7b22c ("staging: HCD descriptor DMA support for the DWC2 driver") Fixes: 762d3a1a9cd7 ("usb: dwc2: host: process all completed urbs") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/a8b1e1711cc6cabfb45d92ede12e35445c66f06c.1708944698.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b258e42688501cadb1a6dd658d6f015df9f32d8f upstream.

Fixed ISOC completion flow in DDMA mode. Added isoc
descriptor actual length value and update urb's start_frame
value.
Fixed initialization of ISOC DMA descriptors flow.

Fixes: 56f5b1cff22a ("staging: Core files for the DWC2 driver")
Fixes: 20f2eb9c4cf8 ("staging: dwc2: add microframe scheduler from downstream Pi kernel")
Fixes: c17b337c1ea4 ("usb: dwc2: host: program descriptor for next frame")
Fixes: dc4c76e7b22c ("staging: HCD descriptor DMA support for the DWC2 driver")
Fixes: 762d3a1a9cd7 ("usb: dwc2: host: process all completed urbs")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/a8b1e1711cc6cabfb45d92ede12e35445c66f06c.1708944698.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc2: host: Fix hibernation flow 2024-04-13T10:51:32+00:00 Minas Harutyunyan Minas.Harutyunyan@synopsys.com 2024-03-13T09:21:11+00:00 eb97df08c3eba50cb3d7a6cdf124e1b4f0b8b5a6 commit 3c7b9856a82227db01a20171d2e24c7ce305d59b upstream. Added to backup/restore registers HFLBADDR, HCCHARi, HCSPLTi, HCTSIZi, HCDMAi and HCDMABi. Fixes: 58e52ff6a6c3 ("usb: dwc2: Move register save and restore functions") Fixes: d17ee77b3044 ("usb: dwc2: add controller hibernation support") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/c2d10ee6098b9b009a8e94191e046004747d3bdd.1708945444.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3c7b9856a82227db01a20171d2e24c7ce305d59b upstream.

Added to backup/restore registers HFLBADDR, HCCHARi, HCSPLTi,
HCTSIZi, HCDMAi and HCDMABi.

Fixes: 58e52ff6a6c3 ("usb: dwc2: Move register save and restore functions")
Fixes: d17ee77b3044 ("usb: dwc2: add controller hibernation support")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/c2d10ee6098b9b009a8e94191e046004747d3bdd.1708945444.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc2: host: Fix remote wakeup from hibernation 2024-04-13T10:51:32+00:00 Minas Harutyunyan Minas.Harutyunyan@synopsys.com 2024-03-13T09:21:21+00:00 4cf44c9fa07eb60137419c9f30712994196b7010 commit bae2bc73a59c200db53b6c15fb26bb758e2c6108 upstream. Starting from core v4.30a changed order of programming GPWRDN_PMUACTV to 0 in case of exit from hibernation on remote wakeup signaling from device. Fixes: c5c403dc4336 ("usb: dwc2: Add host/device hibernation functions") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/99385ec55ce73445b6fbd0f471c9bd40eb1c9b9e.1708939799.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bae2bc73a59c200db53b6c15fb26bb758e2c6108 upstream.

Starting from core v4.30a changed order of programming
GPWRDN_PMUACTV to 0 in case of exit from hibernation on
remote wakeup signaling from device.

Fixes: c5c403dc4336 ("usb: dwc2: Add host/device hibernation functions")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/99385ec55ce73445b6fbd0f471c9bd40eb1c9b9e.1708939799.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: dwc2: write HCINT with INTMASK applied 2023-12-08T07:44:25+00:00 Oliver Neukum oneukum@suse.com 2023-11-15T14:45:07+00:00 7a0b6fc6c3c2a0fcdb2f43d80146ccdffc5304a4 commit 0583bc776ca5b5a3f5752869fc31cf7322df2b35 upstream. dwc2_hc_n_intr() writes back INTMASK as read but evaluates it with intmask applied. In stress testing this causes spurious interrupts like this: [Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length Applying INTMASK prevents this. The issue exists in all versions of the driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: Ivan Ivanov <ivan.ivanov@suse.com> Tested-by: Andrea della Porta <andrea.porta@suse.com> Link: https://lore.kernel.org/r/20231115144514.15248-1-oneukum@suse.com Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0583bc776ca5b5a3f5752869fc31cf7322df2b35 upstream.

dwc2_hc_n_intr() writes back INTMASK as read but evaluates it
with intmask applied. In stress testing this causes spurious
interrupts like this:

[Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length

Applying INTMASK prevents this. The issue exists in all versions of the
driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Ivan Ivanov <ivan.ivanov@suse.com>
Tested-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20231115144514.15248-1-oneukum@suse.com
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>