linux-stable.git/drivers/usb/core, branch v5.4.252 Linux kernel stable tree usb: hide unused usbfs_notify_suspend/resume functions 2023-07-27T06:37:21+00:00 Arnd Bergmann arnd@arndb.de 2023-05-16T20:17:42+00:00 8e8dae8eb230619ae623c85b550d5373eda72167 [ Upstream commit 8e6bd945e6dde64fbc60ec3fe252164493a8d3a2 ] The declaration is in an #ifdef, which causes warnings when building with 'make W=1' and without CONFIG_PM: drivers/usb/core/devio.c:742:6: error: no previous prototype for 'usbfs_notify_suspend' drivers/usb/core/devio.c:747:6: error: no previous prototype for 'usbfs_notify_resume' Use the same #ifdef check around the function definitions to avoid the warnings and slightly shrink the USB core. Fixes: 7794f486ed0b ("usbfs: Add ioctls for runtime power management") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230516202103.558301-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8e6bd945e6dde64fbc60ec3fe252164493a8d3a2 ]

The declaration is in an #ifdef, which causes warnings when building
with 'make W=1' and without CONFIG_PM:

drivers/usb/core/devio.c:742:6: error: no previous prototype for 'usbfs_notify_suspend'
drivers/usb/core/devio.c:747:6: error: no previous prototype for 'usbfs_notify_resume'

Use the same #ifdef check around the function definitions to avoid
the warnings and slightly shrink the USB core.

Fixes: 7794f486ed0b ("usbfs: Add ioctls for runtime power management")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230516202103.558301-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: usbfs: Use consistent mmap functions 2023-06-14T08:59:58+00:00 Ruihan Li lrh2000@pku.edu.cn 2023-05-15T13:09:56+00:00 ec946898039a479ea95c3347f0c45c7ce5e4cbcc commit d0b861653f8c16839c3035875b556afc4472f941 upstream. When hcd->localmem_pool is non-null, localmem_pool is used to allocate DMA memory. In this case, the dma address will be properly returned (in dma_handle), and dma_mmap_coherent should be used to map this memory into the user space. However, the current implementation uses pfn_remap_range, which is supposed to map normal pages. Instead of repeating the logic in the memory allocation function, this patch introduces a more robust solution. Here, the type of allocated memory is checked by testing whether dma_handle is properly set. If dma_handle is properly returned, it means some DMA pages are allocated and dma_mmap_coherent should be used to map them. Otherwise, normal pages are allocated and pfn_remap_range should be called. This ensures that the correct mmap functions are used consistently, independently with logic details that determine which type of memory gets allocated. Fixes: a0e710a7def4 ("USB: usbfs: fix mmap dma mismatch") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Link: https://lore.kernel.org/r/20230515130958.32471-3-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d0b861653f8c16839c3035875b556afc4472f941 upstream.

When hcd->localmem_pool is non-null, localmem_pool is used to allocate
DMA memory. In this case, the dma address will be properly returned (in
dma_handle), and dma_mmap_coherent should be used to map this memory
into the user space. However, the current implementation uses
pfn_remap_range, which is supposed to map normal pages.

Instead of repeating the logic in the memory allocation function, this
patch introduces a more robust solution. Here, the type of allocated
memory is checked by testing whether dma_handle is properly set. If
dma_handle is properly returned, it means some DMA pages are allocated
and dma_mmap_coherent should be used to map them. Otherwise, normal
pages are allocated and pfn_remap_range should be called. This ensures
that the correct mmap functions are used consistently, independently
with logic details that determine which type of memory gets allocated.

Fixes: a0e710a7def4 ("USB: usbfs: fix mmap dma mismatch")
Cc: stable@vger.kernel.org
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Link: https://lore.kernel.org/r/20230515130958.32471-3-lrh2000@pku.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: usbfs: Enforce page requirements for mmap 2023-06-14T08:59:58+00:00 Ruihan Li lrh2000@pku.edu.cn 2023-05-15T13:09:55+00:00 0147952d158b674a05556b06e1f0540d8368103d commit 0143d148d1e882fb1538dc9974c94d63961719b9 upstream. The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent. However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1]. To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages. Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0143d148d1e882fb1538dc9974c94d63961719b9 upstream.

The current implementation of usbdev_mmap uses usb_alloc_coherent to
allocate memory pages that will later be mapped into the user space.
Meanwhile, usb_alloc_coherent employs three different methods to
allocate memory, as outlined below:
 * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to
   allocate memory;
 * If DMA is not available, it uses kmalloc to allocate memory;
 * Otherwise, it uses dma_alloc_coherent.

However, it should be noted that gen_pool_dma_alloc does not guarantee
that the resulting memory will be page-aligned. Furthermore, trying to
map slab pages (i.e., memory allocated by kmalloc) into the user space
is not resonable and can lead to problems, such as a type confusion bug
when PAGE_TABLE_CHECK=y [1].

To address these issues, this patch introduces hcd_alloc_coherent_pages,
which addresses the above two problems. Specifically,
hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of
gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace
kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling
__get_free_pages.

Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm
Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1]
Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.")
Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations")
Cc: stable@vger.kernel.org
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: core: Add routines for endpoint checks in old drivers 2023-05-30T11:44:10+00:00 Alan Stern stern@rowland.harvard.edu 2023-04-10T19:37:07+00:00 80100e0863e509d15ad44b91e1656f06e30aeccd commit 13890626501ffda22b18213ddaf7930473da5792 upstream. Many of the older USB drivers in the Linux USB stack were written based simply on a vendor's device specification. They use the endpoint information in the spec and assume these endpoints will always be present, with the properties listed, in any device matching the given vendor and product IDs. While that may have been true back then, with spoofing and fuzzing it is not true any more. More and more we are finding that those old drivers need to perform at least a minimum of checking before they try to use any endpoint other than ep0. To make this checking as simple as possible, we now add a couple of utility routines to the USB core. usb_check_bulk_endpoints() and usb_check_int_endpoints() take an interface pointer together with a list of endpoint addresses (numbers and directions). They check that the interface's current alternate setting includes endpoints with those addresses and that each of these endpoints has the right type: bulk or interrupt, respectively. Although we already have usb_find_common_endpoints() and related routines meant for a similar purpose, they are not well suited for this kind of checking. Those routines find endpoints of various kinds, but only one (either the first or the last) of each kind, and they don't verify that the endpoints' addresses agree with what the caller expects. In theory the new routines could be more general: They could take a particular altsetting as their argument instead of always using the interface's current altsetting. In practice I think this won't matter too much; multiple altsettings tend to be used for transferring media (audio or visual) over isochronous endpoints, not bulk or interrupt. Drivers for such devices will generally require more sophisticated checking than these simplistic routines provide. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 13890626501ffda22b18213ddaf7930473da5792 upstream.

Many of the older USB drivers in the Linux USB stack were written
based simply on a vendor's device specification.  They use the
endpoint information in the spec and assume these endpoints will
always be present, with the properties listed, in any device matching
the given vendor and product IDs.

While that may have been true back then, with spoofing and fuzzing it
is not true any more.  More and more we are finding that those old
drivers need to perform at least a minimum of checking before they try
to use any endpoint other than ep0.

To make this checking as simple as possible, we now add a couple of
utility routines to the USB core.  usb_check_bulk_endpoints() and
usb_check_int_endpoints() take an interface pointer together with a
list of endpoint addresses (numbers and directions).  They check that
the interface's current alternate setting includes endpoints with
those addresses and that each of these endpoints has the right type:
bulk or interrupt, respectively.

Although we already have usb_find_common_endpoints() and related
routines meant for a similar purpose, they are not well suited for
this kind of checking.  Those routines find endpoints of various
kinds, but only one (either the first or the last) of each kind, and
they don't verify that the endpoints' addresses agree with what the
caller expects.

In theory the new routines could be more general: They could take a
particular altsetting as their argument instead of always using the
interface's current altsetting.  In practice I think this won't matter
too much; multiple altsettings tend to be used for transferring media
(audio or visual) over isochronous endpoints, not bulk or interrupt.
Drivers for such devices will generally require more sophisticated
checking than these simplistic routines provide.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: core: Don't hold device lock while reading the "descriptors" sysfs file 2023-03-03T10:41:49+00:00 Alan Stern stern@rowland.harvard.edu 2023-01-31T20:49:04+00:00 a1e89c8b29d003a20ed2dae6bdae1598d1f23e42 commit 45bf39f8df7f05efb83b302c65ae3b9bc92b7065 upstream. Ever since commit 83e83ecb79a8 ("usb: core: get config and string descriptors for unauthorized devices") was merged in 2013, there has been no mechanism for reallocating the rawdescriptors buffers in struct usb_device after the initial enumeration. Before that commit, the buffers would be deallocated when a device was deauthorized and reallocated when it was authorized and enumerated. This means that the locking in the read_descriptors() routine is not needed, since the buffers it reads will never be reallocated while the routine is running. This locking can interfere with user programs trying to read a hub's descriptors via sysfs while new child devices of the hub are being initialized, since the hub is locked during this procedure. Since the locking in read_descriptors() hasn't been needed for over nine years, we can remove it. Reported-and-tested-by: Troels Liebe Bentsen <troels@connectedcars.dk> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/Y9l+wDTRbuZABzsE@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 45bf39f8df7f05efb83b302c65ae3b9bc92b7065 upstream.

Ever since commit 83e83ecb79a8 ("usb: core: get config and string
descriptors for unauthorized devices") was merged in 2013, there has
been no mechanism for reallocating the rawdescriptors buffers in
struct usb_device after the initial enumeration.  Before that commit,
the buffers would be deallocated when a device was deauthorized and
reallocated when it was authorized and enumerated.

This means that the locking in the read_descriptors() routine is not
needed, since the buffers it reads will never be reallocated while the
routine is running.  This locking can interfere with user programs
trying to read a hub's descriptors via sysfs while new child devices
of the hub are being initialized, since the hub is locked during this
procedure.

Since the locking in read_descriptors() hasn't been needed for over
nine years, we can remove it.

Reported-and-tested-by: Troels Liebe Bentsen <troels@connectedcars.dk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/Y9l+wDTRbuZABzsE@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: core: add quirk for Alcor Link AK9563 smartcard reader 2023-02-22T11:50:32+00:00 Mark Pearson mpearson-lenovo@squebb.ca 2023-02-08T18:12:23+00:00 d9758f7deb5a5931b0e855b6ab26bd7ad897ddd1 commit 303e724d7b1e1a0a93daf0b1ab5f7c4f53543b34 upstream. The Alcor Link AK9563 smartcard reader used on some Lenovo platforms doesn't work. If LPM is enabled the reader will provide an invalid usb config descriptor. Added quirk to disable LPM. Verified fix on Lenovo P16 G1 and T14 G3 Tested-by: Miroslav Zatko <mzatko@mirexoft.com> Tested-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: stable@vger.kernel.org Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230208181223.1092654-1-mpearson-lenovo@squebb.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 303e724d7b1e1a0a93daf0b1ab5f7c4f53543b34 upstream.

The Alcor Link AK9563 smartcard reader used on some Lenovo platforms
doesn't work. If LPM is enabled the reader will provide an invalid
usb config descriptor. Added quirk to disable LPM.

Verified fix on Lenovo P16 G1 and T14 G3

Tested-by: Miroslav Zatko <mzatko@mirexoft.com>
Tested-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230208181223.1092654-1-mpearson-lenovo@squebb.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: core: hub: disable autosuspend for TI TUSB8041 2023-01-24T06:18:00+00:00 Flavio Suligoi f.suligoi@asem.it 2022-12-19T12:47:59+00:00 f11a6891642226adf733466ab041dcb1a5b45f02 commit 7171b0e261b17de96490adf053b8bb4b00061bcf upstream. The Texas Instruments TUSB8041 has an autosuspend problem at high temperature. If there is not USB traffic, after a couple of ms, the device enters in autosuspend mode. In this condition the external clock stops working, to save energy. When the USB activity turns on, ther hub exits the autosuspend state, the clock starts running again and all works fine. At ambient temperature all works correctly, but at high temperature, when the USB activity turns on, the external clock doesn't restart and the hub disappears from the USB bus. Disabling the autosuspend mode for this hub solves the issue. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20221219124759.3207032-1-f.suligoi@asem.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7171b0e261b17de96490adf053b8bb4b00061bcf upstream.

The Texas Instruments TUSB8041 has an autosuspend problem at high
temperature.

If there is not USB traffic, after a couple of ms, the device enters in
autosuspend mode. In this condition the external clock stops working, to
save energy. When the USB activity turns on, ther hub exits the
autosuspend state, the clock starts running again and all works fine.

At ambient temperature all works correctly, but at high temperature,
when the USB activity turns on, the external clock doesn't restart and
the hub disappears from the USB bus.

Disabling the autosuspend mode for this hub solves the issue.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20221219124759.3207032-1-f.suligoi@asem.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: acpi: add helper to check port lpm capability using acpi _DSM 2023-01-24T06:17:59+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2023-01-16T14:22:15+00:00 84e2e57769afba52f574c87026510dcf614ba878 commit cd702d18c882d5a4ea44bbdb38edd5d5577ef640 upstream. Add a helper to evaluate ACPI usb device specific method (_DSM) provided in case the USB3 port shouldn't enter U1 and U2 link states. This _DSM was added as port specific retimer configuration may lead to exit latencies growing beyond U1/U2 exit limits, and OS needs a way to find which ports can't support U1/U2 link power management states. This _DSM is also used by windows: Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm- Some patch issues found in testing resolved by Ron Lee Cc: stable@vger.kernel.org Tested-by: Ron Lee <ron.lee@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cd702d18c882d5a4ea44bbdb38edd5d5577ef640 upstream.

Add a helper to evaluate ACPI usb device specific method (_DSM) provided
in case the USB3 port shouldn't enter U1 and U2 link states.

This _DSM was added as port specific retimer configuration may lead to
exit latencies growing beyond U1/U2 exit limits, and OS needs a way to
find which ports can't support U1/U2 link power management states.

This _DSM is also used by windows:
Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm-

Some patch issues found in testing resolved by Ron Lee

Cc: stable@vger.kernel.org
Tested-by: Ron Lee <ron.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: add NO_LPM quirk for Realforce 87U Keyboard 2022-11-25T16:42:18+00:00 Nicolas Dumazet ndumazet@google.com 2022-11-09T12:29:46+00:00 8c8039ede2f902ba87b1c5c52fcc11a6840418c1 commit 181135bb20dcb184edd89817831b888eb8132741 upstream. Before adding this quirk, this (mechanical keyboard) device would not be recognized, logging: new full-speed USB device number 56 using xhci_hcd unable to read config index 0 descriptor/start: -32 chopping to 0 config(s) It would take dozens of plugging/unpuggling cycles for the keyboard to be recognized. Keyboard seems to simply work after applying this quirk. This issue had been reported by users in two places already ([1], [2]) but nobody tried upstreaming a patch yet. After testing I believe their suggested fix (DELAY_INIT + NO_LPM + DEVICE_QUALIFIER) was probably a little overkill. I assume this particular combination was tested because it had been previously suggested in [3], but only NO_LPM seems sufficient for this device. [1]: https://qiita.com/float168/items/fed43d540c8e2201b543 [2]: https://blog.kostic.dev/posts/making-the-realforce-87ub-work-with-usb30-on-Ubuntu/ [3]: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678477 Cc: stable@vger.kernel.org Signed-off-by: Nicolas Dumazet <ndumazet@google.com> Link: https://lore.kernel.org/r/20221109122946.706036-1-ndumazet@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 181135bb20dcb184edd89817831b888eb8132741 upstream.

Before adding this quirk, this (mechanical keyboard) device would not be
recognized, logging:

  new full-speed USB device number 56 using xhci_hcd
  unable to read config index 0 descriptor/start: -32
  chopping to 0 config(s)

It would take dozens of plugging/unpuggling cycles for the keyboard to
be recognized. Keyboard seems to simply work after applying this quirk.

This issue had been reported by users in two places already ([1], [2])
but nobody tried upstreaming a patch yet. After testing I believe their
suggested fix (DELAY_INIT + NO_LPM + DEVICE_QUALIFIER) was probably a
little overkill. I assume this particular combination was tested because
it had been previously suggested in [3], but only NO_LPM seems
sufficient for this device.

[1]: https://qiita.com/float168/items/fed43d540c8e2201b543
[2]: https://blog.kostic.dev/posts/making-the-realforce-87ub-work-with-usb30-on-Ubuntu/
[3]: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678477

Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Dumazet <ndumazet@google.com>
Link: https://lore.kernel.org/r/20221109122946.706036-1-ndumazet@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: add RESET_RESUME quirk for NVIDIA Jetson devices in RCM 2022-11-03T14:56:53+00:00 Hannu Hartikainen hannu@hrtk.in 2022-09-19T17:16:10+00:00 035dda2bfd7fd21f26675c0b9648f62723e8c264 commit fc4ade55c617dc73c7e9756b57f3230b4ff24540 upstream. NVIDIA Jetson devices in Force Recovery mode (RCM) do not support suspending, ie. flashing fails if the device has been suspended. The devices are still visible in lsusb and seem to work otherwise, making the issue hard to debug. This has been discovered in various forum posts, eg. [1]. The patch has been tested on NVIDIA Jetson AGX Xavier, but I'm adding all the Jetson models listed in [2] on the assumption that they all behave similarly. [1]: https://forums.developer.nvidia.com/t/flashing-not-working/72365 [2]: https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/quick_start.html Signed-off-by: Hannu Hartikainen <hannu@hrtk.in> Cc: stable <stable@kernel.org> # after 6.1-rc3 Link: https://lore.kernel.org/r/20220919171610.30484-1-hannu@hrtk.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fc4ade55c617dc73c7e9756b57f3230b4ff24540 upstream.

NVIDIA Jetson devices in Force Recovery mode (RCM) do not support
suspending, ie. flashing fails if the device has been suspended. The
devices are still visible in lsusb and seem to work otherwise, making
the issue hard to debug. This has been discovered in various forum
posts, eg. [1].

The patch has been tested on NVIDIA Jetson AGX Xavier, but I'm adding
all the Jetson models listed in [2] on the assumption that they all
behave similarly.

[1]: https://forums.developer.nvidia.com/t/flashing-not-working/72365
[2]: https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/quick_start.html

Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Cc: stable <stable@kernel.org>  # after 6.1-rc3
Link: https://lore.kernel.org/r/20220919171610.30484-1-hannu@hrtk.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>