linux-stable.git/drivers/usb/core, branch v5.4.124 Linux kernel stable tree usb: core: reduce power-on-good delay time of root hub 2021-06-03T06:59:16+00:00 Chunfeng Yun chunfeng.yun@mediatek.com 2021-04-10T01:20:45+00:00 23c7e3235a3a5d6297374ab48cc74f63d0a3f275 commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream. Return the exactly delay time given by root hub descriptor, this helps to reduce resume time etc. Due to the root hub descriptor is usually provided by the host controller driver, if there is compatibility for a root hub, we can fix it easily without affect other root hub Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream.

Return the exactly delay time given by root hub descriptor,
this helps to reduce resume time etc.

Due to the root hub descriptor is usually provided by the host
controller driver, if there is compatibility for a root hub,
we can fix it easily without affect other root hub

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: usbfs: Don't WARN about excessively large memory allocations 2021-06-03T06:59:04+00:00 Alan Stern stern@rowland.harvard.edu 2021-05-18T20:18:35+00:00 2c835fede13e03f2743a333e4370b5ed2db91e83 commit 4f2629ea67e7225c3fd292c7fe4f5b3c9d6392de upstream. Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers. To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers. CC: Andrew Morton <akpm@linux-foundation.org> CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+882a85c0c8ec4a3e2281@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210518201835.GA1140918@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4f2629ea67e7225c3fd292c7fe4f5b3c9d6392de upstream.

Syzbot found that the kernel generates a WARNing if the user tries to
submit a bulk transfer through usbfs with a buffer that is way too
large.  This isn't a bug in the kernel; it's merely an invalid request
from the user and the usbfs code does handle it correctly.

In theory the same thing can happen with async transfers, or with the
packet descriptor table for isochronous transfers.

To prevent the MM subsystem from complaining about these bad
allocation requests, add the __GFP_NOWARN flag to the kmalloc calls
for these buffers.

CC: Andrew Morton <akpm@linux-foundation.org>
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+882a85c0c8ec4a3e2281@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210518201835.GA1140918@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: core: hub: fix race condition about TRSMRCY of resume 2021-05-19T08:08:31+00:00 Chunfeng Yun chunfeng.yun@mediatek.com 2021-05-12T02:07:38+00:00 7f15d999dd61821cebf73252fda94d6f0b8c4c2f commit 975f94c7d6c306b833628baa9aec3f79db1eb3a1 upstream. This may happen if the port becomes resume status exactly when usb_port_resume() gets port status, it still need provide a TRSMCRY time before access the device. CC: <stable@vger.kernel.org> Reported-by: Tianping Fang <tianping.fang@mediatek.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210512020738.52961-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 975f94c7d6c306b833628baa9aec3f79db1eb3a1 upstream.

This may happen if the port becomes resume status exactly
when usb_port_resume() gets port status, it still need provide
a TRSMCRY time before access the device.

CC: <stable@vger.kernel.org>
Reported-by: Tianping Fang <tianping.fang@mediatek.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210512020738.52961-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: core: hub: Fix PM reference leak in usb_port_resume() 2021-05-11T12:04:07+00:00 Bixuan Cui cuibixuan@huawei.com 2021-04-08T13:08:31+00:00 665dbcf35508b09ee8c861c1c174e9fa65ef32b4 [ Upstream commit 025f97d188006eeee4417bb475a6878d1e0eed3f ] pm_runtime_get_sync will increment pm usage counter even it failed. thus a pairing decrement is needed. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Link: https://lore.kernel.org/r/20210408130831.56239-1-cuibixuan@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 025f97d188006eeee4417bb475a6878d1e0eed3f ]

pm_runtime_get_sync will increment pm usage counter even it failed.
thus a pairing decrement is needed.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210408130831.56239-1-cuibixuan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
USB: Add reset-resume quirk for WD19's Realtek Hub 2021-05-07T08:51:38+00:00 Chris Chiu chris.chiu@canonical.com 2021-04-20T17:46:51+00:00 164f743918222392f912fb7d629f12aefa9d28a2 commit ca91fd8c7643d93bfc18a6fec1a0d3972a46a18a upstream. Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work after the system resumes from suspend with remote wakeup enabled device connected: [ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71) [ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71) Information of this hub: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 5 D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=5487 Rev= 1.47 S: Manufacturer=Dell Inc. S: Product=Dell dock C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms The failure results from the ETIMEDOUT by chance when turning on the suspend feature for the specified port of the hub. The port seems to be in an unknown state so the hub_activate during resume fails the hub_port_status, then the hub will fail to work. The quirky hub needs the reset-resume quirk to function correctly. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210420174651.6202-1-chris.chiu@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ca91fd8c7643d93bfc18a6fec1a0d3972a46a18a upstream.

Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work
after the system resumes from suspend with remote wakeup enabled
device connected:
[ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71)
[ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71)
[ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71)
[ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71)

Information of this hub:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480  MxCh= 5
D:  Ver= 2.10 Cls=09(hub  ) Sub=00 Prot=02 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=5487 Rev= 1.47
S:  Manufacturer=Dell Inc.
S:  Product=Dell dock
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=01 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=02 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

The failure results from the ETIMEDOUT by chance when turning on
the suspend feature for the specified port of the hub. The port
seems to be in an unknown state so the hub_activate during resume
fails the hub_port_status, then the hub will fail to work.

The quirky hub needs the reset-resume quirk to function correctly.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210420174651.6202-1-chris.chiu@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 Ethernet 2021-05-07T08:51:38+00:00 Kai-Heng Feng kai.heng.feng@canonical.com 2021-04-12T13:54:53+00:00 5922dfc42ac84a0007ce66ba5f4ed7b8a5aaed0a commit 8f23fe35ff1e5491b4d279323a8209a31f03ae65 upstream. This is another branded 8153 device that doesn't work well with LPM enabled: [ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71 So disable LPM to resolve the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1922651 Link: https://lore.kernel.org/r/20210412135455.791971-1-kai.heng.feng@canonical.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8f23fe35ff1e5491b4d279323a8209a31f03ae65 upstream.

This is another branded 8153 device that doesn't work well with LPM
enabled:
[ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71

So disable LPM to resolve the issue.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1922651
Link: https://lore.kernel.org/r/20210412135455.791971-1-kai.heng.feng@canonical.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem 2021-04-07T12:47:43+00:00 Vincent Palatin vpalatin@chromium.org 2021-03-19T12:48:02+00:00 e94dec2765b51e2d32ccc2508781139d7f021642 commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd upstream. This LTE modem (M.2 card) has a bug in its power management: there is some kind of race condition for U3 wake-up between the host and the device. The modem firmware sometimes crashes/locks when both events happen at the same time and the modem fully drops off the USB bus (and sometimes re-enumerates, sometimes just gets stuck until the next reboot). Tested with the modem wired to the XHCI controller on an AMD 3015Ce platform. Without the patch, the modem dropped of the USB bus 5 times in 3 days. With the quirk, it stayed connected for a week while the 'runtime_suspended_time' counter incremented as excepted. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd upstream.

This LTE modem (M.2 card) has a bug in its power management:
there is some kind of race condition for U3 wake-up between the host and
the device. The modem firmware sometimes crashes/locks when both events
happen at the same time and the modem fully drops off the USB bus (and
sometimes re-enumerates, sometimes just gets stuck until the next
reboot).

Tested with the modem wired to the XHCI controller on an AMD 3015Ce
platform. Without the patch, the modem dropped of the USB bus 5 times in
3 days. With the quirk, it stayed connected for a week while the
'runtime_suspended_time' counter incremented as excepted.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable 2021-02-26T09:10:27+00:00 Stefan Ursella stefan.ursella@wolfvision.net 2021-02-10T14:07:11+00:00 54a3c25368d9c08e8ffe25b4b92e80a594f24673 commit 1ebe718bb48278105816ba03a0408ecc2d6cf47f upstream. Without this quirk starting a video capture from the device often fails with kernel: uvcvideo: Failed to set UVC probe control : -110 (exp. 34). Signed-off-by: Stefan Ursella <stefan.ursella@wolfvision.net> Link: https://lore.kernel.org/r/20210210140713.18711-1-stefan.ursella@wolfvision.net Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1ebe718bb48278105816ba03a0408ecc2d6cf47f upstream.

Without this quirk starting a video capture from the device often fails with

kernel: uvcvideo: Failed to set UVC probe control : -110 (exp. 34).

Signed-off-by: Stefan Ursella <stefan.ursella@wolfvision.net>
Link: https://lore.kernel.org/r/20210210140713.18711-1-stefan.ursella@wolfvision.net
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: quirks: sort quirk entries 2021-02-26T09:10:26+00:00 Johan Hovold johan@kernel.org 2021-02-10T11:17:46+00:00 96ef50ec7266408fd1e41d0de48d5ebf97fc7ca3 commit 43861d29c0810a70792bf69d37482efb7bb6677d upstream. Move the last entry to its proper place to maintain the VID/PID sort order. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210210111746.13360-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 43861d29c0810a70792bf69d37482efb7bb6677d upstream.

Move the last entry to its proper place to maintain the VID/PID sort
order.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210210111746.13360-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: add RESET_RESUME quirk for Snapscan 1212 2020-12-21T12:27:05+00:00 Oliver Neukum oneukum@suse.com 2020-12-07T13:03:23+00:00 56339afa39e54c75ce2893fee84631eff72d3fa5 commit 08a02f954b0def3ada8ed6d4b2c7bcb67e885e9c upstream. I got reports that some models of this old scanner need this when using runtime PM. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201207130323.23857-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 08a02f954b0def3ada8ed6d4b2c7bcb67e885e9c upstream.

I got reports that some models of this old scanner need
this when using runtime PM.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201207130323.23857-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>