linux-stable.git/drivers/usb/core, branch v4.4.19

USB: usbfs: fix potential infoleak in devio

2016-08-20T16:09:16+00:00

commit 681fef8380eb818c0b845fca5d2ab1dcbab114ee upstream.

The stack object “ci” has a total size of 8 bytes. Its last 3 bytes
are padding bytes which are not initialized and leaked to userland
via “copy_to_user”.

Signed-off-by: Kangjie Lu 
Signed-off-by: Chas Williams 
Signed-off-by: Greg Kroah-Hartman

usb: quirks: Add no-lpm quirk for Elan

2016-08-20T16:09:16+00:00

commit 25b1f9acc452209ae0fcc8c1332be852b5c52f53 upstream.

BugLink: http://bugs.launchpad.net/bugs/1498667

As reported in BugLink, this device has an issue with Linux Power
Management so adding a quirk.  This quirk was reccomended by Alan Stern:

http://lkml.iu.edu/hypermail/linux/kernel/1606.2/05590.html

Signed-off-by: Joseph Salisbury 
Signed-off-by: Greg Kroah-Hartman

usb: quirks: Add no-lpm quirk for Acer C120 LED Projector

2016-07-11T16:31:12+00:00

commit 32cb0b37098f4beeff5ad9e325f11b42a6ede56c upstream.

The Acer C120 LED Projector is a USB-3 connected pico projector which
takes both its power and video data from USB-3.

In combination with some hubs this device does not play well with
lpm, so disable lpm for it.

Signed-off-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

usb: quirks: Fix sorting

2016-07-11T16:31:12+00:00

commit 81099f97bd31e25ff2719a435b1860fc3876122f upstream.

Properly sort all the entries by vendor id.

Signed-off-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

USB: leave LPM alone if possible when binding/unbinding interface drivers

2016-06-01T19:15:51+00:00

commit 6fb650d43da3e7054984dc548eaa88765a94d49f upstream.

When a USB driver is bound to an interface (either through probing or
by claiming it) or is unbound from an interface, the USB core always
disables Link Power Management during the transition and then
re-enables it afterward.  The reason is because the driver might want
to prevent hub-initiated link power transitions, in which case the HCD
would have to recalculate the various LPM parameters.  This
recalculation takes place when LPM is re-enabled and the new
parameters are sent to the device and its parent hub.

However, if the driver does not want to prevent hub-initiated link
power transitions then none of this work is necessary.  The parameters
don't need to be recalculated, and LPM doesn't need to be disabled and
re-enabled.

It turns out that disabling and enabling LPM can be time-consuming,
enough so that it interferes with user programs that want to claim and
release interfaces rapidly via usbfs.  Since the usbfs kernel driver
doesn't set the disable_hub_initiated_lpm flag, we can speed things up
and get the user programs to work by leaving LPM alone whenever the
flag isn't set.

And while we're improving the way disable_hub_initiated_lpm gets used,
let's also fix its kerneldoc.

Signed-off-by: Alan Stern 
Tested-by: Matthew Giassa 
CC: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

usb: hcd: out of bounds access in for_each_companion

2016-05-04T21:48:41+00:00

commit e86103a75705c7c530768f4ffaba74cf382910f2 upstream.

On BXT platform Host Controller and Device Controller figure as
same PCI device but with different device function. HCD should
not pass data to Device Controller but only to Host Controllers.
Checking if companion device is Host Controller, otherwise skip.

Signed-off-by: Robert Dobrowolski 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

Revert "usb: hub: do not clear BOS field during reset device"

2016-04-20T06:42:17+00:00

commit e5bdfd50d6f76077bf8441d130c606229e100d40 upstream.

This reverts commit d8f00cd685f5c8e0def8593e520a7fef12c22407.

Tony writes:

This upstream commit is causing an oops:
d8f00cd685f5 ("usb: hub: do not clear BOS field during reset device")

This patch has already been included in several -stable kernels.  Here
are the affected kernels:
4.5.0-rc4 (current git)
4.4.2
4.3.6 (currently in review)
4.1.18
3.18.27
3.14.61

How to reproduce the problem:
Boot kernel with slub debugging enabled (otherwise memory corruption
will cause random oopses later instead of immediately)
Plug in USB 3.0 disk to xhci USB 3.0 port
dd if=/dev/sdc of=/dev/null bs=65536
(where /dev/sdc is the USB 3.0 disk)
Unplug USB cable while dd is still going
Oops is immediate:

Reported-by: Tony Battersby 
Cc: Du, Changbin 
Cc: Roger Quadros 
Signed-off-by: Greg Kroah-Hartman

USB: usb_driver_claim_interface: add sanity checking

2016-04-12T16:08:41+00:00

commit 0b818e3956fc1ad976bee791eadcbb3b5fec5bfd upstream.

Attacks that trick drivers into passing a NULL pointer
to usb_driver_claim_interface() using forged descriptors are
known. This thwarts them by sanity checking.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

usb: hub: fix a typo in hub_port_init() leading to wrong logic

2016-04-12T16:08:40+00:00

commit 0d5ce778c43bf888328231bcdce05d5c860655aa upstream.

A typo of j for i led to a logic bug. To rule out future
confusion, the variable names are made meaningful.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

usb: retry reset if a device times out

2016-04-12T16:08:40+00:00

commit 264904ccc33c604d4b3141bbd33808152dfac45b upstream.

Some devices I got show an inability to operate right after
power on if they are already connected. They are beyond recovery
if the descriptors are requested multiple times. So in case of
a timeout we rather bail early and reset again. But it must be
done only on the first loop lest we get into a reset/time out
spiral that can be overcome with a retry.

This patch is a rework of a patch that fell through the cracks.
http://www.spinics.net/lists/linux-usb/msg103263.html

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman