linux-stable.git/drivers/usb/core, branch v4.19.321

usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()

2024-09-04T11:13:09+00:00

commit 3a8839bbb86da7968a792123ed2296d063871a52 upstream.

Device attribute group @usb3_hardware_lpm_attr_group is merged by
add_power_attributes(), but it is not unmerged explicitly, fixed by
unmerging it in remove_power_attributes().

Fixes: 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu 
Link: https://lore.kernel.org/r/20240820-sysfs_fix-v2-1-a9441487077e@quicinc.com
Signed-off-by: Greg Kroah-Hartman

USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor

2024-07-18T09:39:38+00:00

commit a368ecde8a5055b627749b09c6218ef793043e47 upstream.

Syzbot has identified a bug in usbcore (see the Closes: tag below)
caused by our assumption that the reserved bits in an endpoint
descriptor's bEndpointAddress field will always be 0.  As a result of
the bug, the endpoint_is_duplicate() routine in config.c (and possibly
other routines as well) may believe that two descriptors are for
distinct endpoints, even though they have the same direction and
endpoint number.  This can lead to confusion, including the bug
identified by syzbot (two descriptors with matching endpoint numbers
and directions, where one was interrupt and the other was bulk).

To fix the bug, we will clear the reserved bits in bEndpointAddress
when we parse the descriptor.  (Note that both the USB-2.0 and USB-3.1
specs say these bits are "Reserved, reset to zero".)  This requires us
to make a copy of the descriptor earlier in usb_parse_endpoint() and
use the copy instead of the original when checking for duplicates.

Signed-off-by: Alan Stern 
Reported-and-tested-by: syzbot+8693a0bb9c10b554272a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/0000000000003d868e061bc0f554@google.com/
Fixes: 0a8fd1346254 ("USB: fix problems with duplicate endpoint addresses")
CC: Oliver Neukum 
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/205a5edc-7fef-4159-b64a-80374b6b101a@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman

USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k

2024-07-18T09:39:38+00:00

commit 3859e85de30815a20bce7db712ce3d94d40a682d upstream.

START BP-850K is a dot matrix printer that crashes when
it receives a Set-Interface request and needs USB_QUIRK_NO_SET_INTF
to work properly.

Cc: stable 
Signed-off-by: jinxiaobo 
Signed-off-by: WangYuli 
Link: https://lore.kernel.org/r/202E4B2BD0F0FEA4+20240702154408.631201-1-wangyuli@uniontech.com
Signed-off-by: Greg Kroah-Hartman

USB: core: Fix deadlock in usb_deauthorize_interface()

2024-04-13T10:50:11+00:00

commit 80ba43e9f799cbdd83842fc27db667289b3150f5 upstream.

Among the attribute file callback routines in
drivers/usb/core/sysfs.c, the interface_authorized_store() function is
the only one which acquires a device lock on an ancestor device: It
calls usb_deauthorize_interface(), which locks the interface's parent
USB device.

The will lead to deadlock if another process already owns that lock
and tries to remove the interface, whether through a configuration
change or because the device has been disconnected.  As part of the
removal procedure, device_del() waits for all ongoing sysfs attribute
callbacks to complete.  But usb_deauthorize_interface() can't complete
until the device lock has been released, and the lock won't be
released until the removal has finished.

The mechanism provided by sysfs to prevent this kind of deadlock is
to use the sysfs_break_active_protection() function, which tells sysfs
not to wait for the attribute callback.

Reported-and-tested by: Yue Sun 
Reported by: xingwei lee 

Signed-off-by: Alan Stern 
Link: https://lore.kernel.org/linux-usb/CAEkJfYO6jRVC8Tfrd_R=cjO0hguhrV31fDPrLrNOOHocDkPoAA@mail.gmail.com/#r
Fixes: 310d2b4124c0 ("usb: interface authorization: SysFS part of USB interface authorization")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1c37eea1-9f56-4534-b9d8-b443438dc869@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman

usb: port: Don't try to peer unused USB ports based on location

2024-04-13T10:50:08+00:00

commit 69c63350e573367f9c8594162288cffa8a26d0d1 upstream.

Unused USB ports may have bogus location data in ACPI PLD tables.
This causes port peering failures as these unused USB2 and USB3 ports
location may match.

Due to these failures the driver prints a
"usb: port power management may be unreliable" warning, and
unnecessarily blocks port power off during runtime suspend.

This was debugged on a couple DELL systems where the unused ports
all returned zeroes in their location data.
Similar bugreports exist for other systems.

Don't try to peer or match ports that have connect type set to
USB_PORT_NOT_USED.

Fixes: 3bfd659baec8 ("usb: find internal hub tier mismatch via acpi")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218465
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218486
Tested-by: Paul Menzel 
Link: https://lore.kernel.org/linux-usb/5406d361-f5b7-4309-b0e6-8c94408f7d75@molgen.mpg.de
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Mathias Nyman 
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218490
Link: https://lore.kernel.org/r/20240222233343.71856-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT

2024-02-23T07:12:56+00:00

commit f17c34ffc792bbb520e4b61baa16b6cfc7d44b13 upstream.

The OTG 1.3 spec has the feature A_ALT_HNP_SUPPORT, which tells
a device that it is connected to the wrong port. Some devices
refuse to operate if you enable that feature, because it indicates
to them that they ought to request to be connected to another port.

According to the spec this feature may be used based only the following
three conditions:

6.5.3 a_alt_hnp_support
Setting this feature indicates to the B-device that it is connected to
an A-device port that is not capable of HNP, but that the A-device does
have an alternate port that is capable of HNP.
The A-device is required to set this feature under the following conditions:
• the A-device has multiple receptacles
• the A-device port that connects to the B-device does not support HNP
• the A-device has another port that does support HNP

A check for the third and first condition is missing. Add it.

Signed-off-by: Oliver Neukum 
Cc: stable 
Fixes: 7d2d641c44269 ("usb: otg: don't set a_alt_hnp_support feature for OTG 2.0 device")
Link: https://lore.kernel.org/r/20240122153545.12284-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman

usb: hub: Replace hardcoded quirk value with BIT() macro

2024-02-23T07:12:50+00:00

[ Upstream commit 6666ea93d2c422ebeb8039d11e642552da682070 ]

This patch replaces the hardcoded quirk value in the macro with
BIT().

Signed-off-by: Hardik Gajjar 
Reviewed-by: Alan Stern 
Link: https://lore.kernel.org/r/20231205181829.127353-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: hub: Guard against accesses to uninitialized BOS descriptors

2023-10-25T09:16:38+00:00

commit f74a7afc224acd5e922c7a2e52244d891bbe44ee upstream.

Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h
access fields inside udev->bos without checking if it was allocated and
initialized. If usb_get_bos_descriptor() fails for whatever
reason, udev->bos will be NULL and those accesses will result in a
crash:

BUG: kernel NULL pointer dereference, address: 0000000000000018
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 
Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021
Workqueue: usb_hub_wq hub_event
RIP: 0010:hub_port_reset+0x193/0x788
Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9
RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310
RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840
RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0
Call Trace:
hub_event+0x73f/0x156e
? hub_activate+0x5b7/0x68f
process_one_work+0x1a2/0x487
worker_thread+0x11a/0x288
kthread+0x13a/0x152
? process_one_work+0x487/0x487
? kthread_associate_blkcg+0x70/0x70
ret_from_fork+0x1f/0x30

Fall back to a default behavior if the BOS descriptor isn't accessible
and skip all the functionalities that depend on it: LPM support checks,
Super Speed capabilitiy checks, U1/U2 states setup.

Signed-off-by: Ricardo Cañuelo 
Cc: stable 
Link: https://lore.kernel.org/r/20230830100418.1952143-1-ricardo.canuelo@collabora.com
Signed-off-by: Greg Kroah-Hartman

USB: quirks: add quirk for Focusrite Scarlett

2023-08-11T09:45:34+00:00

commit 9dc162e22387080e2d06de708b89920c0e158c9a upstream.

The Focusrite Scarlett audio device does not behave correctly during
resumes. Below is what happens during every resume (captured with
Beagle 5000):



//



The Scarlett disconnects and is enumerated again.

However from time to time it drops completely off the USB bus during
resume. Below is captured occurrence of such an event:



//
//




To fix the condition a user has to unplug and plug the device again.

With USB_QUIRK_RESET_RESUME applied ("usbcore.quirks=1235:8211:b")
for the Scarlett audio device the issue still reproduces.

Applying USB_QUIRK_DISCONNECT_SUSPEND ("usbcore.quirks=1235:8211:m")
fixed the issue and the Scarlett audio device didn't drop off the USB
bus for ~5000 suspend/resume cycles where originally issue reproduced in
~100 or less suspend/resume cycles.

Signed-off-by: Łukasz Bartosik 
Cc: stable 
Link: https://lore.kernel.org/r/20230724112911.1802577-1-lb@semihalf.com
Signed-off-by: Greg Kroah-Hartman

USB: core: Add routines for endpoint checks in old drivers

2023-05-30T11:42:14+00:00

commit 13890626501ffda22b18213ddaf7930473da5792 upstream.

Many of the older USB drivers in the Linux USB stack were written
based simply on a vendor's device specification.  They use the
endpoint information in the spec and assume these endpoints will
always be present, with the properties listed, in any device matching
the given vendor and product IDs.

While that may have been true back then, with spoofing and fuzzing it
is not true any more.  More and more we are finding that those old
drivers need to perform at least a minimum of checking before they try
to use any endpoint other than ep0.

To make this checking as simple as possible, we now add a couple of
utility routines to the USB core.  usb_check_bulk_endpoints() and
usb_check_int_endpoints() take an interface pointer together with a
list of endpoint addresses (numbers and directions).  They check that
the interface's current alternate setting includes endpoints with
those addresses and that each of these endpoints has the right type:
bulk or interrupt, respectively.

Although we already have usb_find_common_endpoints() and related
routines meant for a similar purpose, they are not well suited for
this kind of checking.  Those routines find endpoints of various
kinds, but only one (either the first or the last) of each kind, and
they don't verify that the endpoints' addresses agree with what the
caller expects.

In theory the new routines could be more general: They could take a
particular altsetting as their argument instead of always using the
interface's current altsetting.  In practice I think this won't matter
too much; multiple altsettings tend to be used for transferring media
(audio or visual) over isochronous endpoints, not bulk or interrupt.
Drivers for such devices will generally require more sophisticated
checking than these simplistic routines provide.

Signed-off-by: Alan Stern 
Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman