linux-stable.git/drivers/usb/core, branch v3.12.64

USB: change bInterval default to 10 ms

2016-09-29T09:14:25+00:00

commit 08c5cd37480f59ea39682f4585d92269be6b1424 upstream.

Some full-speed mceusb infrared transceivers contain invalid endpoint
descriptors for their interrupt endpoints, with bInterval set to 0.
In the past they have worked out okay with the mceusb driver, because
the driver sets the bInterval field in the descriptor to 1,
overwriting whatever value may have been there before.  However, this
approach was never sanctioned by the USB core, and in fact it does not
work with xHCI controllers, because they use the bInterval value that
was present when the configuration was installed.

Currently usbcore uses 32 ms as the default interval if the value in
the endpoint descriptor is invalid.  It turns out that these IR
transceivers don't work properly unless the interval is set to 10 ms
or below.  To work around this mceusb problem, this patch changes the
endpoint-descriptor parsing routine, making the default interval value
be 10 ms rather than 32 ms.

Signed-off-by: Alan Stern 
Tested-by: Wade Berrier 
Signed-off-by: Jiri Slaby

USB: fix typo in wMaxPacketSize validation

2016-09-23T07:29:22+00:00

commit 6c73358c83ce870c0cf32413e5cadb3b9a39c606 upstream.

The maximum value allowed for wMaxPacketSize of a high-speed interrupt
endpoint is 1024 bytes, not 1023.

Signed-off-by: Alan Stern 
Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Signed-off-by: Jiri Slaby

USB: validate wMaxPacketValue entries in endpoint descriptors

2016-09-21T11:40:08+00:00

commit aed9d65ac3278d4febd8665bd7db59ef53e825fe upstream.

Erroneous or malicious endpoint descriptors may have non-zero bits in
reserved positions, or out-of-bounds values.  This patch helps prevent
these from causing problems by bounds-checking the wMaxPacketValue
entries in endpoint descriptors and capping the values at the maximum
allowed.

This issue was first discovered and tests were conducted by Jake Lamberson
, an intern working for Rosie Hall.

Signed-off-by: Alan Stern 
Reported-by: roswest 
Tested-by: roswest 
Signed-off-by: Jiri Slaby

usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices

2016-09-21T11:40:08+00:00

commit 8a1b2725a60d3267135c15e80984b4406054f650 upstream.

Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can
handle the new speed.
In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed
devices. In a few places we add a "Plus" string to inform the user of the
new speed.

[js] backport to 3.12: no use_new_scheme yet

Signed-off-by: Mathias Nyman 
Signed-off-by: Jiri Slaby

USB: usbfs: fix potential infoleak in devio

2016-07-21T06:36:05+00:00

commit 681fef8380eb818c0b845fca5d2ab1dcbab114ee upstream.

The stack object “ci” has a total size of 8 bytes. Its last 3 bytes
are padding bytes which are not initialized and leaked to userland
via “copy_to_user”.

Signed-off-by: Kangjie Lu 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

usb: quirks: Add no-lpm quirk for Acer C120 LED Projector

2016-07-21T06:35:56+00:00

commit 32cb0b37098f4beeff5ad9e325f11b42a6ede56c upstream.

The Acer C120 LED Projector is a USB-3 connected pico projector which
takes both its power and video data from USB-3.

In combination with some hubs this device does not play well with
lpm, so disable lpm for it.

Signed-off-by: Hans de Goede 
Signed-off-by: Jiri Slaby

usb: hcd: out of bounds access in for_each_companion

2016-05-02T17:54:56+00:00

commit e86103a75705c7c530768f4ffaba74cf382910f2 upstream.

On BXT platform Host Controller and Device Controller figure as
same PCI device but with different device function. HCD should
not pass data to Device Controller but only to Host Controllers.
Checking if companion device is Host Controller, otherwise skip.

Signed-off-by: Robert Dobrowolski 
Acked-by: Alan Stern 
Signed-off-by: Jiri Slaby

USB: usb_driver_claim_interface: add sanity checking

2016-04-11T14:44:05+00:00

commit 0b818e3956fc1ad976bee791eadcbb3b5fec5bfd upstream.

Attacks that trick drivers into passing a NULL pointer
to usb_driver_claim_interface() using forged descriptors are
known. This thwarts them by sanity checking.

Signed-off-by: Oliver Neukum 
Signed-off-by: Jiri Slaby

usb: hub: fix a typo in hub_port_init() leading to wrong logic

2016-04-11T14:44:03+00:00

commit 0d5ce778c43bf888328231bcdce05d5c860655aa upstream.

A typo of j for i led to a logic bug. To rule out future
confusion, the variable names are made meaningful.

Signed-off-by: Oliver Neukum 
Signed-off-by: Jiri Slaby

usb: retry reset if a device times out

2016-04-11T14:44:03+00:00

commit 264904ccc33c604d4b3141bbd33808152dfac45b upstream.

Some devices I got show an inability to operate right after
power on if they are already connected. They are beyond recovery
if the descriptors are requested multiple times. So in case of
a timeout we rather bail early and reset again. But it must be
done only on the first loop lest we get into a reset/time out
spiral that can be overcome with a retry.

This patch is a rework of a patch that fell through the cracks.
http://www.spinics.net/lists/linux-usb/msg103263.html

Signed-off-by: Oliver Neukum 
Signed-off-by: Jiri Slaby