linux-stable.git/drivers/usb/core, branch v3.12.59

USB: usb_driver_claim_interface: add sanity checking

2016-04-11T14:44:05+00:00

commit 0b818e3956fc1ad976bee791eadcbb3b5fec5bfd upstream.

Attacks that trick drivers into passing a NULL pointer
to usb_driver_claim_interface() using forged descriptors are
known. This thwarts them by sanity checking.

Signed-off-by: Oliver Neukum 
Signed-off-by: Jiri Slaby

usb: hub: fix a typo in hub_port_init() leading to wrong logic

2016-04-11T14:44:03+00:00

commit 0d5ce778c43bf888328231bcdce05d5c860655aa upstream.

A typo of j for i led to a logic bug. To rule out future
confusion, the variable names are made meaningful.

Signed-off-by: Oliver Neukum 
Signed-off-by: Jiri Slaby

usb: retry reset if a device times out

2016-04-11T14:44:03+00:00

commit 264904ccc33c604d4b3141bbd33808152dfac45b upstream.

Some devices I got show an inability to operate right after
power on if they are already connected. They are beyond recovery
if the descriptors are requested multiple times. So in case of
a timeout we rather bail early and reset again. But it must be
done only on the first loop lest we get into a reset/time out
spiral that can be overcome with a retry.

This patch is a rework of a patch that fell through the cracks.
http://www.spinics.net/lists/linux-usb/msg103263.html

Signed-off-by: Oliver Neukum 
Signed-off-by: Jiri Slaby

USB: fix invalid memory access in hub_activate()

2016-04-11T14:43:52+00:00

commit e50293ef9775c5f1cf3fcc093037dd6a8c5684ea upstream.

Commit 8520f38099cc ("USB: change hub initialization sleeps to
delayed_work") changed the hub_activate() routine to make part of it
run in a workqueue.  However, the commit failed to take a reference to
the usb_hub structure or to lock the hub interface while doing so.  As
a result, if a hub is plugged in and quickly unplugged before the work
routine can run, the routine will try to access memory that has been
deallocated.  Or, if the hub is unplugged while the routine is
running, the memory may be deallocated while it is in active use.

This patch fixes the problem by taking a reference to the usb_hub at
the start of hub_activate() and releasing it at the end (when the work
is finished), and by locking the hub interface while the work routine
is running.  It also adds a check at the start of the routine to see
if the hub has already been disconnected, in which nothing should be
done.

Signed-off-by: Alan Stern 
Reported-by: Alexandru Cornea 
Tested-by: Alexandru Cornea 
Fixes: 8520f38099cc ("USB: change hub initialization sleeps to delayed_work")
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

usb: Add connected retry on resume for non SS devices

2016-03-07T14:39:35+00:00

commit 6b82b1223e3b14afd89d167795671a9f4f77b2f0 upstream.

Currently usb_port_resume waits for up to 2 seconds for CONNECT
status for SS devices only. This change will do the same thing for
non-SS devices even though the reason is a little different. This
will fix an issue where VBUS is turned off during system wide
"suspend to ram" and some 2.0 devices take greater than the current
max of 100ms to show connected after VBUS is enabled. This is most
commonly seen on hard drive based devices and USB3.0 devices plugged
into a 2.0 only port.

Signed-off-by: Al Cooper 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

USB: quirks: Fix another ELAN touchscreen

2016-01-25T14:15:36+00:00

commit df36c5bede207f734e4750beb2b14fb892050280 upstream.

Like other buggy models that had their fixes [1], the touchscreen with
id 04f3:21b8 from ELAN Microelectronics needs the device-qualifier
quirk. Otherwise, it fails to respond, blocks the boot for a random
amount of time and pollutes dmesg with:

[ 2887.373196] usb 1-5: new full-speed USB device number 41 using xhci_hcd
[ 2889.502000] usb 1-5: unable to read config index 0 descriptor/start: -71
[ 2889.502005] usb 1-5: can't read configurations, error -71
[ 2889.654571] usb 1-5: new full-speed USB device number 42 using xhci_hcd
[ 2891.783438] usb 1-5: unable to read config index 0 descriptor/start: -71
[ 2891.783443] usb 1-5: can't read configurations, error -71

[1]: See commits c68929f, 876af5d, d749947, a32c99e and dc703ec.

Tested-by: Adrien Vergé 
Signed-off-by: Adrien Vergé 
Signed-off-by: Greg Kroah-Hartman 
Cc: Oliver Neukum 
Signed-off-by: Jiri Slaby

usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message

2016-01-05T16:48:52+00:00

commit 5377adb092664d336ac212499961cac5e8728794 upstream.

usb_parse_ss_endpoint_companion() now decodes the burst multiplier
correctly in order to check that it's <= 3, but still uses the wrong
expression if warning that it's > 3.

Fixes: ff30cbc8da42 ("usb: Use the USB_SS_MULT() macro to get the ...")
Signed-off-by: Ben Hutchings 
Signed-off-by: Jiri Slaby

USB: add quirk for devices with broken LPM

2016-01-05T16:48:51+00:00

commit ad87e03213b552a5c33d5e1e7a19a73768397010 upstream.

Some USB device / host controller combinations seem to have problems
with Link Power Management.  For example, Steinar found that his xHCI
controller wouldn't handle bandwidth calculations correctly for two
video cards simultaneously when LPM was enabled, even though the bus
had plenty of bandwidth available.

This patch introduces a new quirk flag for devices that should remain
disabled for LPM, and creates quirk entries for Steinar's devices.

Signed-off-by: Alan Stern 
Reported-by: Steinar H. Gunderson 
Signed-off-by: Jiri Slaby

Revert "USB: Add device quirk for ASUS T100 Base Station keyboard"

2015-10-28T15:38:37+00:00

This reverts commit e25ecd21ffdbf1f8287103ccf97205fc30088344 in 3.12,
upstream commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 (USB: Add
device quirk for ASUS T100 Base Station keyboard).

It was applied twice to 3.12 and one backport is bogus.

Cc: Lu Baolu 
Cc: Alan Stern 
Cc: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

USB: Add OTG PET device to TPL

2015-10-28T15:38:37+00:00

commit e5dff0e80463cc3fa236e898ef1491b40be70b19 upstream.

OTG device shall support this device for allowing compliance automated testing.
The modification is derived from Pavankumar and Vijayavardhans' previous work.

Signed-off-by: Macpaul Lin 
Cc: Pavankumar Kondeti 
Cc: Vijayavardhan Vennapusa 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby