linux-stable.git/drivers/usb/core, branch v3.11.8 Linux kernel stable tree USB: quirks: add touchscreen that is dazzeled by remote wakeup 2013-11-13T03:08:06+00:00 Oliver Neukum oneukum@suse.de 2013-10-16T10:26:07+00:00 8763fe5320d35c791358e837cbbcc9a4b723d5e3 commit 614ced91fc6fbb5a1cdd12f0f1b6c9197d9f1350 upstream. The device descriptors are messed up after remote wakeup Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 614ced91fc6fbb5a1cdd12f0f1b6c9197d9f1350 upstream.

The device descriptors are messed up after remote wakeup

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: quirks.c: add one device that cannot deal with suspension 2013-11-13T03:08:06+00:00 Oliver Neukum oneukum@suse.de 2013-10-14T14:22:40+00:00 d7baca932367b91222e3b1485da85d90a5f144dd commit 4294bca7b423d1a5aa24307e3d112a04075e3763 upstream. The device is not responsive when resumed, unless it is reset. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4294bca7b423d1a5aa24307e3d112a04075e3763 upstream.

The device is not responsive when resumed, unless it is reset.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit 2013-10-05T14:17:57+00:00 Kurt Garloff kurt@garloff.de 2013-09-24T12:13:48+00:00 f4a51c743e0740c438c7aa49844b8a2adae93966 commit 831abf76643555a99b80a3b54adfa7e4fa0a3259 upstream. Trying to read data from the Pegasus Technologies NoteTaker (0e20:0101) [1] with the Windows App (EasyNote) works natively but fails when Windows is running under KVM (and the USB device handed to KVM). The reason is a USB control message usb 4-2.2: control urb: bRequestType=22 bRequest=09 wValue=0200 wIndex=0001 wLength=0008 This goes to endpoint address 0x01 (wIndex); however, endpoint address 0x01 does not exist. There is an endpoint 0x81 though (same number, but other direction); the app may have meant that endpoint instead. The kernel thus rejects the IO and thus we see the failure. Apparently, Linux is more strict here than Windows ... we can't change the Win app easily, so that's a problem. It seems that the Win app/driver is buggy here and the driver does not behave fully according to the USB HID class spec that it claims to belong to. The device seems to happily deal with that though (and seems to not really care about this value much). So the question is whether the Linux kernel should filter here. Rejecting has the risk that somewhat non-compliant userspace apps/ drivers (most likely in a virtual machine) are prevented from working. Not rejecting has the risk of confusing an overly sensitive device with such a transfer. Given the fact that Windows does not filter it makes this risk rather small though. The patch makes the kernel more tolerant: If the endpoint address in wIndex does not exist, but an endpoint with toggled direction bit does, it will let the transfer through. (It does NOT change the message.) With attached patch, the app in Windows in KVM works. usb 4-2.2: check_ctrlrecip: process 13073 (qemu-kvm) requesting ep 01 but needs 81 I suspect this will mostly affect apps in virtual environments; as on Linux the apps would have been adapted to the stricter handling of the kernel. I have done that for mine[2]. [1] http://www.pegatech.com/ [2] https://sourceforge.net/projects/notetakerpen/ Signed-off-by: Kurt Garloff <kurt@garloff.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 831abf76643555a99b80a3b54adfa7e4fa0a3259 upstream.

Trying to read data from the Pegasus Technologies NoteTaker (0e20:0101)
[1] with the Windows App (EasyNote) works natively but fails when
Windows is running under KVM (and the USB device handed to KVM).

The reason is a USB control message
 usb 4-2.2: control urb: bRequestType=22 bRequest=09 wValue=0200 wIndex=0001 wLength=0008
This goes to endpoint address 0x01 (wIndex); however, endpoint address
0x01 does not exist. There is an endpoint 0x81 though (same number,
but other direction); the app may have meant that endpoint instead.

The kernel thus rejects the IO and thus we see the failure.

Apparently, Linux is more strict here than Windows ... we can't change
the Win app easily, so that's a problem.

It seems that the Win app/driver is buggy here and the driver does not
behave fully according to the USB HID class spec that it claims to
belong to.  The device seems to happily deal with that though (and
seems to not really care about this value much).

So the question is whether the Linux kernel should filter here.
Rejecting has the risk that somewhat non-compliant userspace apps/
drivers (most likely in a virtual machine) are prevented from working.
Not rejecting has the risk of confusing an overly sensitive device with
such a transfer. Given the fact that Windows does not filter it makes
this risk rather small though.

The patch makes the kernel more tolerant: If the endpoint address in
wIndex does not exist, but an endpoint with toggled direction bit does,
it will let the transfer through. (It does NOT change the message.)

With attached patch, the app in Windows in KVM works.
 usb 4-2.2: check_ctrlrecip: process 13073 (qemu-kvm) requesting ep 01 but needs 81

I suspect this will mostly affect apps in virtual environments; as on
Linux the apps would have been adapted to the stricter handling of the
kernel. I have done that for mine[2].

[1] http://www.pegatech.com/
[2] https://sourceforge.net/projects/notetakerpen/

Signed-off-by: Kurt Garloff <kurt@garloff.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: don't check pm qos NO_POWER_OFF flag in usb_port_suspend() 2013-09-27T00:21:42+00:00 Lan Tianyu tianyu.lan@intel.com 2013-07-03T14:17:54+00:00 4d425b4eb684168380ab3fc959b2c418c0c3d44d commit 98a4f1ff7bea8002ab79d6776e30d27932e88244 upstream. The pm qos NO_POWER_OFF flag is checked twice during usb device suspend to see if the usb port power off condition is met. This is redundant and also will prevent the port from being powered off if the NO_POWER_OFF flag is changed to 1 from 0 after the device was already suspended. More detail in the following link. http://marc.info/?l=linux-usb&m=136543949130865&w=2 This patch should be backported to kernels as old as 3.7, that contain the commit f7ac7787ad361e31a7972e2854ed8dc2eedfac3b "usb/acpi: Use ACPI methods to power off ports." Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 98a4f1ff7bea8002ab79d6776e30d27932e88244 upstream.

The pm qos NO_POWER_OFF flag is checked twice during usb device suspend
to see if the usb port power off condition is met. This is redundant and
also will prevent the port from being powered off if the NO_POWER_OFF
flag is changed to 1 from 0 after the device was already suspended.

More detail in the following link.
	http://marc.info/?l=linux-usb&m=136543949130865&w=2

This patch should be backported to kernels as old as 3.7, that
contain the commit f7ac7787ad361e31a7972e2854ed8dc2eedfac3b "usb/acpi:
Use ACPI methods to power off ports."

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: handle LPM errors during device suspend correctly 2013-09-27T00:21:40+00:00 Alan Stern stern@rowland.harvard.edu 2013-07-30T19:39:02+00:00 ee04f90d8a21f96edd0c2207e2b1040874307fd6 commit aa5ceae24bf8dff1d6fe87c6c4b08e69c6d33550 upstream. The hub driver's usb_port_suspend() routine doesn't handle errors related to Link Power Management properly. It always returns failure, it doesn't try to clean up the wakeup setting, (in the case of system sleep) it doesn't try to go ahead with the port suspend regardless, and it doesn't try to apply the new power-off mechanism. This patch fixes these problems. Note: Sarah fixed this patch to apply against 3.11, since the original commit (4fae6f0fa86f92e6bc7429371b1e177ad0aaac66 "USB: handle LPM errors during device suspend correctly") called usb_disable_remote_wakeup, which won't be added until 3.12. This patch should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections.". There will be merge conflicts, since LTM wasn't added until 3.6. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aa5ceae24bf8dff1d6fe87c6c4b08e69c6d33550 upstream.

The hub driver's usb_port_suspend() routine doesn't handle errors
related to Link Power Management properly.  It always returns failure,
it doesn't try to clean up the wakeup setting, (in the case of system
sleep) it doesn't try to go ahead with the port suspend regardless,
and it doesn't try to apply the new power-off mechanism.

This patch fixes these problems.

Note: Sarah fixed this patch to apply against 3.11, since the original
commit (4fae6f0fa86f92e6bc7429371b1e177ad0aaac66 "USB: handle LPM errors
during device suspend correctly") called usb_disable_remote_wakeup,
which won't be added until 3.12.

This patch should be backported to kernels as old as 3.5, that
contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB:
Disable USB 3.0 LPM in critical sections.".  There will be merge
conflicts, since LTM wasn't added until 3.6.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: config->desc.bLength may not exceed amount of data returned by the device 2013-09-27T00:21:39+00:00 Hans de Goede hdegoede@redhat.com 2013-08-03T14:37:48+00:00 6a60f9edfff43606eb9b574082b8d242f9977e8f commit b4f17a488ae2e09bfcf95c0e0b4219c246f1116a upstream. While reading the config parsing code I noticed this check is missing, without this check config->desc.wTotalLength can end up with a value larger then the dev->rawdescriptors length for the config, and when userspace then tries to get the rawdescriptors bad things may happen. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b4f17a488ae2e09bfcf95c0e0b4219c246f1116a upstream.

While reading the config parsing code I noticed this check is missing, without
this check config->desc.wTotalLength can end up with a value larger then the
dev->rawdescriptors length for the config, and when userspace then tries to
get the rawdescriptors bad things may happen.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: Don't fail port power resume on device disconnect. 2013-09-27T00:21:39+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-08-06T01:58:15+00:00 7db4ad4c9faa61112c01c78e2dc978209e10f907 commit d49dad3e11638f66be4e16573ffaa8c46a09e3b3 upstream. Userspace can tell the kernel to power off any USB port, including ones that are visible and connectible to users. When an attached USB device goes into suspend, the port will be powered off if the pm_qos_no_port_poweroff file for its port is set to 0, the device does not have remote wakeup enabled, and the device is marked as persistent. If the user disconnects the USB device while the port is powered off, the current code does not handle that properly. If you disconnect a device, and then run `lsusb -v -s` for the device, the device disconnect does not get handled by the USB core. The runtime resume of the port fails, because hub_port_debounce_be_connected() returns -ETIMEDOUT. This means the port resume fails and khubd doesn't handle the USB device disconnect. This leaves the device listed in lsusb, and the port's runtime_status will be permanently marked as "error". Fix this by ignoring the return value of hub_port_debounce_be_connected. Users can disconnect USB devices while the ports are powered off, and we must be able to handle that. This patch should be backported to kernels as old as 3.9, that contain the commit ad493e5e580546e6c3024b76a41535476da1546a "usb: add usb port auto power off mechanism" Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Lan Tianyu <tianyu.lan@intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d49dad3e11638f66be4e16573ffaa8c46a09e3b3 upstream.

Userspace can tell the kernel to power off any USB port, including ones
that are visible and connectible to users.  When an attached USB device
goes into suspend, the port will be powered off if the
pm_qos_no_port_poweroff file for its port is set to 0, the device does
not have remote wakeup enabled, and the device is marked as persistent.

If the user disconnects the USB device while the port is powered off,
the current code does not handle that properly.  If you disconnect a
device, and then run `lsusb -v -s` for the device, the device disconnect
does not get handled by the USB core.  The runtime resume of the port
fails, because hub_port_debounce_be_connected() returns -ETIMEDOUT.

This means the port resume fails and khubd doesn't handle the USB device
disconnect.  This leaves the device listed in lsusb, and the port's
runtime_status will be permanently marked as "error".

Fix this by ignoring the return value of hub_port_debounce_be_connected.
Users can disconnect USB devices while the ports are powered off, and we
must be able to handle that.

This patch should be backported to kernels as old as 3.9, that
contain the commit ad493e5e580546e6c3024b76a41535476da1546a "usb: add
usb port auto power off mechanism"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Lan Tianyu <tianyu.lan@intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: add two quirky touchscreen 2013-08-14T19:49:27+00:00 Oliver Neukum oneukum@suse.de 2013-08-14T09:01:46+00:00 304ab4ab079a8ed03ce39f1d274964a532db036b These devices tend to become unresponsive after S3 Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
These devices tend to become unresponsive after S3

Signed-off-by: Oliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: core: don't try to reset_device() a port that got just disconnected 2013-07-31T16:51:45+00:00 Julius Werner jwerner@chromium.org 2013-07-31T02:51:20+00:00 481f2d4f89f87a0baa26147f323380e31cfa7c44 The USB hub driver's event handler contains a check to catch SuperSpeed devices that transitioned into the SS.Inactive state and tries to fix them with a reset. It decides whether to do a plain hub port reset or call the usb_reset_device() function based on whether there was a device attached to the port. However, there are device/hub combinations (found with a JetFlash Transcend mass storage stick (8564:1000) on the root hub of an Intel LynxPoint PCH) which can transition to the SS.Inactive state on disconnect (and stay there long enough for the host to notice). In this case, above-mentioned reset check will call usb_reset_device() on the stale device data structure. The kernel will send pointless LPM control messages to the no longer connected device address and can even cause several 5 second khubd stalls on some (buggy?) host controllers, before finally accepting the device's fate amongst a flurry of error messages. This patch makes the choice of reset dependent on the port status that has just been read from the hub in addition to the existence of an in-kernel data structure for the device, and only proceeds with the more extensive reset if both are valid. Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> 
The USB hub driver's event handler contains a check to catch SuperSpeed
devices that transitioned into the SS.Inactive state and tries to fix
them with a reset. It decides whether to do a plain hub port reset or
call the usb_reset_device() function based on whether there was a device
attached to the port.

However, there are device/hub combinations (found with a JetFlash
Transcend mass storage stick (8564:1000) on the root hub of an Intel
LynxPoint PCH) which can transition to the SS.Inactive state on
disconnect (and stay there long enough for the host to notice). In this
case, above-mentioned reset check will call usb_reset_device() on the
stale device data structure. The kernel will send pointless LPM control
messages to the no longer connected device address and can even cause
several 5 second khubd stalls on some (buggy?) host controllers, before
finally accepting the device's fate amongst a flurry of error messages.

This patch makes the choice of reset dependent on the port status that
has just been read from the hub in addition to the existence of an
in-kernel data structure for the device, and only proceeds with the more
extensive reset if both are valid.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
usb: Clear both buffers when clearing a control transfer TT buffer. 2013-07-25T18:37:13+00:00 William Gulland wgulland@google.com 2013-06-27T23:10:20+00:00 2c7b871b9102c497ba8f972aa5d38532f05b654d Control transfers have both IN and OUT (or SETUP) packets, so when clearing TT buffers for a control transfer it's necessary to send two HUB_CLEAR_TT_BUFFER requests to the hub. Signed-off-by: William Gulland <wgulland@google.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Control transfers have both IN and OUT (or SETUP) packets, so when
clearing TT buffers for a control transfer it's necessary to send
two HUB_CLEAR_TT_BUFFER requests to the hub.

Signed-off-by: William Gulland <wgulland@google.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>