linux-stable.git/drivers/usb/core, branch v3.1.2 Linux kernel stable tree USB: Update last_busy time after autosuspend fails 2011-11-11T17:44:11+00:00 Alan Stern stern@rowland.harvard.edu 2011-11-03T23:52:46+00:00 54974aaab296975b7dd3512686d38ec658048b04 commit b2c0a863e14676fa5760c6d828fd373288e2f64a upstream. Originally, the runtime PM core would send an idle notification whenever a suspend attempt failed. The idle callback routine could then schedule a delayed suspend for some time later. However this behavior was changed by commit f71648d73c1650b8b4aceb3856bebbde6daa3b86 (PM / Runtime: Remove idle notification after failing suspend). No notifications were sent, and there was no clear mechanism to retry failed suspends. This caused problems for the usbhid driver, because it fails autosuspend attempts as long as a key is being held down. A companion patch changes the PM core's behavior, but we also need to change the USB core. In particular, this patch (as1493) updates the device's last_busy time when an autosuspend fails, so that the PM core will retry the autosuspend in the future when the delay time expires again. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit b2c0a863e14676fa5760c6d828fd373288e2f64a upstream.

Originally, the runtime PM core would send an idle notification
whenever a suspend attempt failed.  The idle callback routine could
then schedule a delayed suspend for some time later.

However this behavior was changed by commit
f71648d73c1650b8b4aceb3856bebbde6daa3b86 (PM / Runtime: Remove idle
notification after failing suspend).  No notifications were sent, and
there was no clear mechanism to retry failed suspends.

This caused problems for the usbhid driver, because it fails
autosuspend attempts as long as a key is being held down.  A companion
patch changes the PM core's behavior, but we also need to change the
USB core.  In particular, this patch (as1493) updates the device's
last_busy time when an autosuspend fails, so that the PM core will
retry the autosuspend in the future when the delay time expires
again.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: add quirk for Logitech C300 web cam 2011-11-11T17:42:44+00:00 Jon Levell linuxusb@coralbark.net 2011-09-29T19:42:52+00:00 69b5709c67c8647f56e37d522f608d9e48a1a878 commit 5b253d88cc6c65a23cefc457a5a4ef139913c5fc upstream. My webcam is a Logitech C300 and I get "chipmunk"ed squeaky sound. The following trivial patch fixes it. Signed-off-by: Jon Levell <linuxusb@coralbark.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 5b253d88cc6c65a23cefc457a5a4ef139913c5fc upstream.

My webcam is a Logitech C300 and I get "chipmunk"ed squeaky sound.
The following trivial patch fixes it.

Signed-off-by: Jon Levell <linuxusb@coralbark.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: add RESET_RESUME for webcams shown to be quirky 2011-11-11T17:42:38+00:00 Oliver Neukum oneukum@suse.de 2011-09-13T06:42:21+00:00 e7f5326684730b0bed49e6df926b36bf8e0d8ac7 commit 2394d67e446bf616a0885167d5f0d397bdacfdfc upstream. The new runtime PM code has shown that many webcams suffer from a race condition that may crash them upon resume. Runtime PM is especially prone to show the problem because it retains power to the cameras at all times. However system suspension may also crash the devices and retain power to the devices. The only way to solve this problem without races is in usbcore with the RESET_RESUME quirk. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 2394d67e446bf616a0885167d5f0d397bdacfdfc upstream.

The new runtime PM code has shown that many webcams suffer
from a race condition that may crash them upon resume.
Runtime PM is especially prone to show the problem because
it retains power to the cameras at all times. However
system suspension may also crash the devices and retain
power to the devices.
The only way to solve this problem without races is in
usbcore with the RESET_RESUME quirk.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: pid_ns: ensure pid is not freed during kill_pid_info_as_uid 2011-11-11T17:42:37+00:00 Serge Hallyn serge.hallyn@canonical.com 2011-09-26T15:18:29+00:00 d950e568728e94f7b495214fd887aea2a07f0d05 commit aec01c5895051849ed842dc5b8794017a7751f28 upstream. Alan Stern points out that after spin_unlock(&ps->lock) there is no guarantee that ps->pid won't be freed. Since kill_pid_info_as_uid() is called after the spin_unlock(), the pid passed to it must be pinned. Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit aec01c5895051849ed842dc5b8794017a7751f28 upstream.

Alan Stern points out that after spin_unlock(&ps->lock) there is no
guarantee that ps->pid won't be freed.  Since kill_pid_info_as_uid() is
called after the spin_unlock(), the pid passed to it must be pinned.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
usb/core/devio.c: Check for printer class specific request 2011-11-11T17:42:37+00:00 Matthias Dellweg 2500@gmx.de 2011-09-25T12:26:25+00:00 54a996b2eb057a5d375ab33425a0b2d24567219b commit 393cbb5151ecda9f9e14e3082d048dd27a1ff9f6 upstream. In the usb printer class specific request get_device_id the value of wIndex is (interface << 8 | altsetting) instead of just interface. This enables the detection of some printers with libusb. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthias Dellweg <2500@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 393cbb5151ecda9f9e14e3082d048dd27a1ff9f6 upstream.

In the usb printer class specific request get_device_id the value of
wIndex is (interface << 8 | altsetting) instead of just interface.
This enables the detection of some printers with libusb.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthias Dellweg <2500@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: for usb_autopm_get_interface_async -EINPROGRESS is not an error 2011-11-11T17:42:12+00:00 Jim Wylder jwylder1@motorola.com 2011-09-07T02:07:20+00:00 d8d92c4fdbcf740765e4a3f95a8476f78568b3eb commit c5a48592d874ddef8c7880311581eccf0eb30c3b upstream. A return value of -EINPROGRESS from pm_runtime_get indicates that the device is already resuming due to a previous call. Internally, usb_autopm_get_interface_async doesn't treat this as an error and increments the usage count, but passes the error status along to the caller. The logical assumption of the caller is that any negative return value reflects the device not resuming and the pm_usage_cnt not being incremented. Since the usage count is being incremented and the device is resuming, return success (0) instead. Signed-off-by: James Wylder <james.wylder@motorola.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit c5a48592d874ddef8c7880311581eccf0eb30c3b upstream.

A return value of -EINPROGRESS from pm_runtime_get indicates that
the device is already resuming due to a previous call.  Internally,
usb_autopm_get_interface_async doesn't treat this as an error and
increments the usage count, but passes the error status along
to the caller.  The logical assumption of the caller is that
any negative return value reflects the device not resuming
and the pm_usage_cnt not being incremented.  Since the usage count
is being incremented and the device is resuming, return success (0)
instead.

Signed-off-by: James Wylder <james.wylder@motorola.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth. 2011-08-15T16:22:40+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2011-08-09T23:31:54+00:00 8a9af4fdf6d5eeb3200a088354d266a87e8260b0 usb_ifnum_to_if() can return NULL if the USB device does not have a configuration installed (usb_device->actconfig == NULL), or if we can't find the interface number in the installed configuration. Return an error instead of crashing. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> 
usb_ifnum_to_if() can return NULL if the USB device does not have a
configuration installed (usb_device->actconfig == NULL), or if we can't
find the interface number in the installed configuration.  Return an
error instead of crashing.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
usb/config: use proper endian access for wMaxPacketSize 2011-08-01T16:45:29+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2011-07-29T09:05:45+00:00 7de7c7d2cb49900e0b967be871bf695c7d6135c9 wMaxPacketSize is __le16 and should be accessed as such. Also fix the wBytesPerInterval assignment while here. v2: also fix the wBytesPerInterval assigment, noticed by Matt Evans This patch should be backported to the 3.0 kernel. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Matt Evans <matt@ozlabs.org> Cc: stable@kernel.org 
wMaxPacketSize is __le16 and should be accessed as such. Also fix the
wBytesPerInterval assignment while here.

v2: also fix the wBytesPerInterval assigment, noticed by Matt Evans

This patch should be backported to the 3.0 kernel.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Matt Evans <matt@ozlabs.org>
Cc: stable@kernel.org
Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-07-26T06:08:32+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-07-26T06:08:32+00:00 f549953c15deab4c54708b39af86d4edecc6cddc * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits) EHCI: fix direction handling for interrupt data toggles USB: serial: add IDs for WinChipHead USB->RS232 adapter USB: OHCI: fix another regression for NVIDIA controllers usb: gadget: m66592-udc: add pullup function usb: gadget: m66592-udc: add function for external controller usb: gadget: r8a66597-udc: add pullup function usb: renesas_usbhs: support multi driver usb: renesas_usbhs: inaccessible pipe is not an error usb: renesas_usbhs: care buff alignment when dma handler USB: PL2303: correctly handle baudrates above 115200 usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift usb: renesas_usbhs: compile/config are rescued usb: renesas_usbhs: fixup comment-out usb: update email address in ohci-sh and r8a66597-hcd usb: r8a66597-hcd: add function for external controller EHCI: only power off port if over-current is active USB: mon: Allow to use usbmon without debugfs USB: EHCI: go back to using the system clock for QH unlinks ehci: add pci quirk for Ordissimo and RM Slate 100 too ehci: refactor pci quirk to use standard dmi_check_system method ... Fix up trivial conflicts in Documentation/feature-removal-schedule.txt 
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits)
  EHCI: fix direction handling for interrupt data toggles
  USB: serial: add IDs for WinChipHead USB->RS232 adapter
  USB: OHCI: fix another regression for NVIDIA controllers
  usb: gadget: m66592-udc: add pullup function
  usb: gadget: m66592-udc: add function for external controller
  usb: gadget: r8a66597-udc: add pullup function
  usb: renesas_usbhs: support multi driver
  usb: renesas_usbhs: inaccessible pipe is not an error
  usb: renesas_usbhs: care buff alignment when dma handler
  USB: PL2303: correctly handle baudrates above 115200
  usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift
  usb: renesas_usbhs: compile/config are rescued
  usb: renesas_usbhs: fixup comment-out
  usb: update email address in ohci-sh and r8a66597-hcd
  usb: r8a66597-hcd: add function for external controller
  EHCI: only power off port if over-current is active
  USB: mon: Allow to use usbmon without debugfs
  USB: EHCI: go back to using the system clock for QH unlinks
  ehci: add pci quirk for Ordissimo and RM Slate 100 too
  ehci: refactor pci quirk to use standard dmi_check_system method
  ...

Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
USB: additional regression fix for device removal 2011-07-07T20:29:33+00:00 Alan Stern stern@rowland.harvard.edu 2011-07-06T21:03:45+00:00 ca5c485f55d326d9a23e4badd05890148aa53f74 Commit e534c5b831c8b8e9f5edee5c8a37753c808b80dc (USB: fix regression occurring during device removal) didn't go far enough. It failed to take into account that when a driver claims multiple interfaces, it may release them all at the same time. As a result, some interfaces can get released before they are unregistered, and we deadlock trying to acquire the bandwidth_mutex that we already own. This patch (asl478) handles this case by setting the "unregistering" flag on all the interfaces before removing any of them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Tested-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Commit e534c5b831c8b8e9f5edee5c8a37753c808b80dc (USB: fix regression
occurring during device removal) didn't go far enough.  It failed to
take into account that when a driver claims multiple interfaces, it may
release them all at the same time.  As a result, some interfaces can
get released before they are unregistered, and we deadlock trying to
acquire the bandwidth_mutex that we already own.

This patch (asl478) handles this case by setting the "unregistering"
flag on all the interfaces before removing any of them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Tested-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>