linux-stable.git/drivers/usb/core/sysfs.c, branch linux-5.17.y

driver core: Move the "removable" attribute from USB to core

2021-05-27T07:36:31+00:00

Move the "removable" attribute from USB to core in order to allow it to be
supported by other subsystem / buses. Individual buses that want to support
this attribute can populate the removable property of the device while
enumerating it with the 3 possible values -
 - "unknown"
 - "fixed"
 - "removable"
Leaving the field unchanged (i.e. "not supported") would mean that the
attribute would not show up in sysfs for that device. The UAPI (location,
symantics etc) for the attribute remains unchanged.

Move the "removable" attribute from USB to the device core so it can be
used by other subsystems / buses.

By default, devices do not have a "removable" attribute in sysfs.

If a subsystem or bus driver wants to support a "removable" attribute, it
should call device_set_removable() before calling device_register() or
device_add(), e.g.:

    device_set_removable(dev, DEVICE_REMOVABLE);
    device_register(dev);

The possible values and the resulting sysfs attribute contents are:

    DEVICE_REMOVABLE_UNKNOWN  ->  "unknown"
    DEVICE_REMOVABLE          ->  "removable"
    DEVICE_FIXED              ->  "fixed"

Convert the USB "removable" attribute to use this new device core
functionality.  There should be no user-visible change in the location or
semantics of attribute for USB devices.

Reviewed-by: Bjorn Helgaas 
Signed-off-by: Rajat Jain 
Link: https://lore.kernel.org/r/20210524171812.18095-1-rajatja@google.com
Signed-off-by: Greg Kroah-Hartman

usb: core: sysfs: Check for SSP rate in speed attr

2021-03-23T12:18:22+00:00

Check for usb_device->ssp_rate to output the signaling rate for genXxY.

Signed-off-by: Thinh Nguyen 
Link: https://lore.kernel.org/r/80a3214592b30da6ca95bb87984f2a9779de0b14.1615432770.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman

USB: core: Constify static attribute_group structs

2020-11-26T12:40:42+00:00

These are never modified, so make them const to allow the compiler to
put them in read-only memory. Done with the help of coccinelle.

Signed-off-by: Rikard Falkeborn 
Link: https://lore.kernel.org/r/20201125162500.37228-2-rikard.falkeborn@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: core: fix slab-out-of-bounds Read in read_descriptors

2020-09-04T14:41:22+00:00

The USB device descriptor may get changed between two consecutive
enumerations on the same device for some reason, such as DFU or
malicius device.
In that case, we may access the changing descriptor if we don't take
the device lock here.

The issue is reported:
https://syzkaller.appspot.com/bug?id=901a0d9e6519ef8dc7acab25344bd287dd3c7be9

Cc: stable 
Cc: Alan Stern 
Reported-by: syzbot+256e56ddde8b8957eabd@syzkaller.appspotmail.com
Fixes: 217a9081d8e6 ("USB: add all configs to the "descriptors" attribute")
Signed-off-by: Zeng Tao 
Link: https://lore.kernel.org/r/1599201467-11000-1-git-send-email-prime.zeng@hisilicon.com
Signed-off-by: Greg Kroah-Hartman

USB: core: Replace an empty statement with a debug message

2020-04-23T13:28:13+00:00

This patch adds a dev_dbg() message to usb_create_sysfs_intf_files().
The message is not expected ever to appear; it's real purpose is to
satisfy the __must_check attribute on device_create_file() without
triggering a compiler warning about an empty statement.

In fact we don't really care if the sysfs attribute file doesn't get
created.  The interface string descriptor is purely informational and
hardly ever present.

Suggested-by: NeilBrown 
Signed-off-by: Alan Stern 

Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221618500.11262-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman

usb: use kobj_to_dev() API

2020-02-14T16:38:15+00:00

Use kobj_to_dev() API instead of container_of().

Signed-off-by: chenqiwu 
Link: https://lore.kernel.org/r/1581683820-9978-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: setup authorized_default attributes using usb_bus_notify

2019-08-08T14:07:34+00:00

Currently, the authorized_default and interface_authorized_default
attributes for HCD are set up after the uevent has been sent to userland.
This creates a race condition where userland may fail to access this
file when processing the event. Move the appending of these attributes
earlier relying on the usb_bus_notify dispatcher.

Signed-off-by: Thiébaud Weksteen 
Cc: stable 
Link: https://lore.kernel.org/r/20190806110050.38918-1-tweek@google.com
Signed-off-by: Greg Kroah-Hartman

USB: Add new USB LPM helpers

2019-01-18T09:02:56+00:00

Use new helpers to make LPM enabling/disabling more clear.

This is a preparation to subsequent patch.

Signed-off-by: Kai-Heng Feng 
Cc: stable  # after much soaking
Signed-off-by: Greg Kroah-Hartman

USB: USB 3.2 Add sysfs entries for a usb device rx_lanes and tx_lanes

2018-04-22T14:19:26+00:00

Add rx_lanes and tx_lanes lane count sysfs entries for a usb device
struct usb_devuce rx_lanes and tx_lanes variables.

Shows number of lanes used by the usb device

Data rate of a device is the lane speed * lane count, for example
USB 3.2 Gen 2x2 device uses 10Gbps signaling per lane, and has dual-lane
support 10Gbps * 2 = 20Gbps

Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2017-11-14T05:14:07+00:00

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver updates for 4.15-rc1.

  There is the usual amount of gadget and xhci driver updates, along
  with phy and chipidea enhancements. There's also a lot of SPDX tags
  and license boilerplate cleanups as well, which provide some churn in
  the diffstat.

  Other major thing is the typec code that moved out of staging and into
  the "real" part of the drivers/usb/ tree, which was nice to see
  happen.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
  USB: usbfs: compute urb->actual_length for isochronous
  usb: core: message: remember to reset 'ret' to 0 when necessary
  USB: typec: Remove remaining redundant license text
  USB: typec: add SPDX identifiers to some files
  USB: renesas_usbhs: rcar?.h: add SPDX tags
  USB: chipidea: ci_hdrc_tegra.c: add SPDX line
  USB: host: xhci-debugfs: add SPDX lines
  USB: add SPDX identifiers to all remaining Makefiles
  usb: host: isp1362-hcd: remove a couple of redundant assignments
  USB: adutux: remove redundant variable minor
  usb: core: add a new usb_get_ptm_status() helper
  usb: core: add a 'type' parameter to usb_get_status()
  usb: core: introduce a new usb_get_std_status() helper
  usb: core: rename usb_get_status() 'type' argument to 'recip'
  usb: core: add Status Type definitions
  USB: gadget: Remove redundant license text
  USB: gadget: function: Remove redundant license text
  USB: gadget: udc: Remove redundant license text
  USB: gadget: legacy: Remove redundant license text
  ...