linux-stable.git/drivers/usb/core/message.c, branch v4.14.166

USB: CDC: fix sanity checks in CDC union parser

2019-08-25T08:50:21+00:00

commit 54364278fb3cabdea51d6398b07c87415065b3fc upstream.

A few checks checked for the size of the pointer to a structure
instead of the structure itself. Copy & paste issue presumably.

Fixes: e4c6fb7794982 ("usbnet: move the CDC parser into USB core")
Cc: stable 
Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum 
Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman

USB: core: Fix unterminated string returned by usb_string()

2019-05-08T05:20:46+00:00

commit c01c348ecdc66085e44912c97368809612231520 upstream.

Some drivers (such as the vub300 MMC driver) expect usb_string() to
return a properly NUL-terminated string, even when an error occurs.
(In fact, vub300's probe routine doesn't bother to check the return
code from usb_string().)  When the driver goes on to use an
unterminated string, it leads to kernel errors such as
stack-out-of-bounds, as found by the syzkaller USB fuzzer.

An out-of-range string index argument is not at all unlikely, given
that some devices don't provide string descriptors and therefore list
0 as the value for their string indexes.  This patch makes
usb_string() return a properly terminated empty string along with the
-EINVAL error code when an out-of-range index is encountered.

And since a USB string index is a single-byte value, indexes >= 256
are just as invalid as values of 0 or below.

Signed-off-by: Alan Stern 
Reported-by: syzbot+b75b85111c10b8d680f1@syzkaller.appspotmail.com
CC: 
Signed-off-by: Greg Kroah-Hartman

USB: Consolidate LPM checks to avoid enabling LPM twice

2019-05-02T07:40:30+00:00

commit d7a6c0ce8d26412903c7981503bad9e1cc7c45d2 upstream.

USB Bluetooth controller QCA ROME (0cf3:e007) sometimes stops working
after S3:
[ 165.110742] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 168.432065] Bluetooth: hci0: Failed to send body at 4 of 1953 (-110)

After some experiments, I found that disabling LPM can workaround the
issue.

On some platforms, the USB power is cut during S3, so the driver uses
reset-resume to resume the device. During port resume, LPM gets enabled
twice, by usb_reset_and_verify_device() and usb_port_resume().

Consolidate all checks into new LPM helpers to make sure LPM only gets
enabled once.

Fixes: de68bab4fa96 ("usb: Don't enable USB 2.0 Link PM by default.”)
Signed-off-by: Kai-Heng Feng 
Cc: stable  # after much soaking
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

USB: Add new USB LPM helpers

2019-05-02T07:40:30+00:00

commit 7529b2574a7aaf902f1f8159fbc2a7caa74be559 upstream.

Use new helpers to make LPM enabling/disabling more clear.

This is a preparation to subsequent patch.

Signed-off-by: Kai-Heng Feng 
Cc: stable  # after much soaking
Signed-off-by: Greg Kroah-Hartman

usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()

2018-09-26T06:38:07+00:00

commit f9a5b4f58b280c1d26255376713c132f93837621 upstream.

The steps taken by usb core to set a new interface is very different from
what is done on the xHC host side.

xHC hardware will do everything in one go. One command is used to set up
new endpoints, free old endpoints, check bandwidth, and run the new
endpoints.

All this is done by xHC when usb core asks the hcd to check for
available bandwidth. At this point usb core has not yet flushed the old
endpoints, which will cause use-after-free issues in xhci driver as
queued URBs are cancelled on a re-allocated endpoint.

To resolve this add a call to usb_disable_interface() which will flush
the endpoints before calling usb_hcd_alloc_bandwidth()

Additional checks in xhci driver will also be implemented to gracefully
handle stale URB cancel on freed and re-allocated endpoints

Cc: 
Reported-by: Sudip Mukherjee 
Signed-off-by: Mathias Nyman 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

usb: quirks: add control message delay for 1b1c:1b20

2018-03-19T07:42:46+00:00

commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream.

Corsair Strafe RGB keyboard does not respond to usb control messages
sometimes and hence generates timeouts.

Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair
Strafe RGB keyboard") tried to fix those timeouts by adding
USB_QUIRK_DELAY_INIT.

Unfortunately, even with this quirk timeouts of usb_control_msg()
can still be seen, but with a lower frequency (approx. 1 out of 15):

[   29.103520] usb 1-8: string descriptor 0 read error: -110
[   34.363097] usb 1-8: can't set config #1, error -110

Adding further delays to different locations where usb control
messages are issued just moves the timeouts to other locations,
e.g.:

[   35.400533] usbhid 1-8:1.0: can't add hid device: -110
[   35.401014] usbhid: probe of 1-8:1.0 failed with error -110

The only way to reliably avoid those issues is having a pause after
each usb control message. In approx. 200 boot cycles no more timeouts
were seen.

Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary
to have the delay in hub_port_connect() after hub_port_init().

The overall boot time seems not to be influenced by these additional
delays, even on fast machines and lightweight distributions.

Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard")
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich 
Signed-off-by: Greg Kroah-Hartman

USB: core: harden cdc_parse_cdc_header

2017-09-21T15:01:38+00:00

Andrey Konovalov reported a possible out-of-bounds problem for the
cdc_parse_cdc_header function.  He writes:
	It looks like cdc_parse_cdc_header() doesn't validate buflen
	before accessing buffer[1], buffer[2] and so on. The only check
	present is while (buflen > 0).

So fix this issue up by properly validating the buffer length matches
what the descriptor says it is.

Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usb: get rid of some ReST doc build errors

2017-04-11T20:40:48+00:00

We need an space before a numbered list to avoid those warnings:

./drivers/usb/core/message.c:478: ERROR: Unexpected indentation.
./drivers/usb/core/message.c:479: WARNING: Block quote ends without a blank line; unexpected unindent.
./include/linux/usb/composite.h:455: ERROR: Unexpected indentation.
./include/linux/usb/composite.h:456: WARNING: Block quote ends without a blank line; unexpected unindent.

Signed-off-by: Mauro Carvalho Chehab 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Jonathan Corbet

usb: core: update comments for send message functions

2017-01-19T09:34:40+00:00

The commonly use of bottom halves are tasklet and workqueue. The big
difference between tasklet and workqueue is that the tasklet runs in
an interrupt context and the workqueue runs in a process context,
which means it can sleep if need be.

The comment for usb_control/interrupt/bulk_msg() functions note that do
not use this function within an interrupt context, like a 'bottom half'
handler. With this comment, it makes confuse about usage of these
functions.

To more clarify, remove 'bottom half' comment.

Signed-off-by: Jaejoong Kim 
Signed-off-by: Greg Kroah-Hartman

USB: core: add missing license information to some files

2016-10-29T16:51:56+00:00

Some of the USB core files were missing explicit license information.
As all files in the kernel tree are implicitly licensed under the
GPLv2-only, be explicit in case someone get confused looking at
individual files by using the SPDX nomenclature.

Signed-off-by: Greg Kroah-Hartman