linux-stable.git/drivers/usb/class, branch v4.4.201

USB: usblp: fix use-after-free on disconnect

2019-10-29T08:13:25+00:00

commit 7a759197974894213621aa65f0571b51904733d6 upstream.

A recent commit addressing a runtime PM use-count regression, introduced
a use-after-free by not making sure we held a reference to the struct
usb_interface for the lifetime of the driver data.

Fixes: 9a31535859bf ("USB: usblp: fix runtime PM after driver unbind")
Cc: stable 
Reported-by: syzbot+cd24df4d075c319ebfc5@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20191015175522.18490-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

USB: usblp: fix runtime PM after driver unbind

2019-10-17T20:41:00+00:00

commit 9a31535859bfd8d1c3ed391f5e9247cd87bb7909 upstream.

Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.

Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.

Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter")
Cc: stable 
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20191001084908.2003-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

USB: cdc-wdm: fix race between write and disconnect due to flag abuse

2019-09-06T08:18:16+00:00

commit 1426bd2c9f7e3126e2678e7469dca9fd9fc6dd3e upstream.

In case of a disconnect an ongoing flush() has to be made fail.
Nevertheless we cannot be sure that any pending URB has already
finished, so although they will never succeed, they still must
not be touched.
The clean solution for this is to check for WDM_IN_USE
and WDM_DISCONNECTED in flush(). There is no point in ever
clearing WDM_IN_USE, as no further writes make sense.

The issue is as old as the driver.

Fixes: afba937e540c9 ("USB: CDC WDM driver")
Reported-by: syzbot+d232cca6ec42c2edb3fc@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum 
Cc: stable 
Link: https://lore.kernel.org/r/20190827103436.21143-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman

usb: cdc-acm: make sure a refcount is taken early enough

2019-08-25T08:53:02+00:00

commit c52873e5a1ef72f845526d9f6a50704433f9c625 upstream.

destroy() will decrement the refcount on the interface, so that
it needs to be taken so early that it never undercounts.

Fixes: 7fb57a019f94e ("USB: cdc-acm: Fix potential deadlock (lockdep warning)")
Cc: stable 
Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum 
Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman

usb: cdc-acm: send ZLP for Telit 3G Intel based modems

2019-01-16T21:16:10+00:00

commit 34aabf918717dd14e05051896aaecd3b16b53d95 upstream.

Telit 3G Intel based modems require zero packet to be sent if
out data size is equal to the endpoint max packet size.

Signed-off-by: Daniele Palmas 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.

2019-01-13T09:05:30+00:00

commit eafb27fa5283599ce6c5492ea18cf636a28222bb upstream.

Mediatek Preloader is a proprietary embedded boot loader for loading
Little Kernel and Linux into device DRAM.

This boot loader also handle firmware update. Mediatek Preloader will be
enumerated as a virtual COM port when the device is connected to Windows
or Linux OS via CDC-ACM class driver. When the USB enumeration has been
done, Mediatek Preloader will send out handshake command "READY" to PC
actively instead of waiting command from the download tool.

Since Linux 4.12, the commit "tty: reset termios state on device
registration" (93857edd9829e144acb6c7e72d593f6e01aead66) causes Mediatek
Preloader receiving some abnoraml command like "READYXX" as it sent.
This will be recognized as an incorrect response. The behavior change
also causes the download handshake fail. This change only affects
subsequent connects if the reconnected device happens to get the same minor
number.

By disabling the ECHO termios flag could avoid this problem. However, it
cannot be done by user space configuration when download tool open
/dev/ttyACM0. This is because the device running Mediatek Preloader will
send handshake command "READY" immediately once the CDC-ACM driver is
ready.

This patch wants to fix above problem by introducing "DISABLE_ECHO"
property in driver_info. When Mediatek Preloader is connected, the
CDC-ACM driver could disable ECHO flag in termios to avoid the problem.

Signed-off-by: Macpaul Lin 
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold 
Acked-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

usb: cdc-acm: add entry for Hiro (Conexant) modem

2018-11-27T15:08:02+00:00

commit 63529eaa6164ef7ab4b907b25ac3648177e5e78f upstream.

The cdc-acm kernel module currently does not support the Hiro (Conexant)
H05228 USB modem. The patch below adds the device specific information:
	idVendor	0x0572
	idProduct	0x1349

Signed-off-by: Maarten Jacobs 
Acked-by: Oliver Neukum 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

cdc-acm: correct counting of UART states in serial state notification

2018-11-10T15:41:43+00:00

commit f976d0e5747ca65ccd0fb2a4118b193d70aa1836 upstream.

The usb standard ("Universal Serial Bus Class Definitions for Communication
Devices") distiguishes between "consistent signals" (DSR, DCD), and
"irregular signals" (break, ring, parity error, framing error, overrun).
The bits of "irregular signals" are set, if this error/event occurred on
the device side and are immeadeatly unset, if the serial state notification
was sent.
Like other drivers of real serial ports do, just the occurence of those
events should be counted in serial_icounter_struct (but no 1->0
transitions).

Signed-off-by: Tobias Herzog 
Acked-by: Oliver Neukum 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()"

2018-10-10T06:52:08+00:00

commit e871db8d78df1c411032cbb3acfdf8930509360e upstream.

This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427.

The bug the patch describes to, has been already fixed in commit
2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback")
so need to this, revert it.

Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()")
Cc: stable 
Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Greg Kroah-Hartman

usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()

2018-09-26T06:35:08+00:00

commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427 upstream.

wdm_in_callback() is a completion handler function for the USB driver.
So it should not sleep. But it calls service_outstanding_interrupt(),
which calls usb_submit_urb() with GFP_KERNEL.

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman