linux-stable.git/drivers/usb/class, branch v3.18.129

usb: cdc-acm: add entry for Hiro (Conexant) modem

2018-11-27T15:05:37+00:00

commit 63529eaa6164ef7ab4b907b25ac3648177e5e78f upstream.

The cdc-acm kernel module currently does not support the Hiro (Conexant)
H05228 USB modem. The patch below adds the device specific information:
	idVendor	0x0572
	idProduct	0x1349

Signed-off-by: Maarten Jacobs 
Acked-by: Oliver Neukum 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

cdc-acm: correct counting of UART states in serial state notification

2018-11-10T15:39:23+00:00

commit f976d0e5747ca65ccd0fb2a4118b193d70aa1836 upstream.

The usb standard ("Universal Serial Bus Class Definitions for Communication
Devices") distiguishes between "consistent signals" (DSR, DCD), and
"irregular signals" (break, ring, parity error, framing error, overrun).
The bits of "irregular signals" are set, if this error/event occurred on
the device side and are immeadeatly unset, if the serial state notification
was sent.
Like other drivers of real serial ports do, just the occurence of those
events should be counted in serial_icounter_struct (but no 1->0
transitions).

Signed-off-by: Tobias Herzog 
Acked-by: Oliver Neukum 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()"

2018-10-13T07:09:27+00:00

commit e871db8d78df1c411032cbb3acfdf8930509360e upstream.

This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427.

The bug the patch describes to, has been already fixed in commit
2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback")
so need to this, revert it.

Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()")
Cc: stable 
Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Greg Kroah-Hartman

usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()

2018-09-26T06:33:58+00:00

commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427 upstream.

wdm_in_callback() is a completion handler function for the USB driver.
So it should not sleep. But it calls service_outstanding_interrupt(),
which calls usb_submit_urb() with GFP_KERNEL.

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usb: cdc_acm: Add quirk for Castles VEGA3000

2018-07-28T05:43:19+00:00

commit 1445cbe476fc3dd09c0b380b206526a49403c071 upstream.

The device (a POS terminal) implements CDC ACM, but has not union
descriptor.

Signed-off-by: Lubomir Rintel 
Acked-by: Oliver Neukum 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

CDC-ACM: apply quirk for card reader

2018-02-07T19:07:56+00:00

commit df1cc78a52491f71d8170d513d0f6f114faa1bda upstream.

This devices drops random bytes from messages if you talk to it
too fast.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: Do not log urb submission errors on disconnect

2018-02-07T19:07:56+00:00

commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream.

When disconnected sometimes the cdc-acm driver logs errors like these:

[20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19
[20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19
[20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19
[20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19
[20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19
[20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19
[20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19

Silence these by not logging errors when the result is -ENODEV.

Signed-off-by: Hans de Goede 
Acked-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: fix buffer overflows with parsing CDC headers

2017-11-30T08:35:54+00:00

Parsing CDC headers a buffer overflow cannot just be prevented
by checking that the remainder of the buffer is longer than minimum
length. The size of the fields to be parsed must be figured in, too.

In newer kernels this issue has been fixed at a central location with

commit 2e1c42391ff2556387b3cb6308b24f6f65619feb
Author: Greg Kroah-Hartman 
Date:   Thu Sep 21 16:58:48 2017 +0200

    USB: core: harden cdc_parse_cdc_header

on anything older the parsing had not been centralised, so a separate
fix for each driver is necessary.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

usb: cdc_acm: Add quirk for Elatec TWN3

2017-10-27T08:17:23+00:00

commit 765fb2f181cad669f2beb87842a05d8071f2be85 upstream.

Elatec TWN3 has the union descriptor on data interface. This results in
failure to bind the device to the driver with the following log:
  usb 1-1.2: new full speed USB device using streamplug-ehci and address 4
  usb 1-1.2: New USB device found, idVendor=09d8, idProduct=0320
  usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  usb 1-1.2: Product: RFID Device (COM)
  usb 1-1.2: Manufacturer: OEM
  cdc_acm 1-1.2:1.0: Zero length descriptor references
  cdc_acm: probe of 1-1.2:1.0 failed with error -22

Adding the NO_UNION_NORMAL quirk for the device fixes the issue.

`lsusb -v` of the device:

Bus 001 Device 003: ID 09d8:0320
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            2 Communications
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        32
  idVendor           0x09d8
  idProduct          0x0320
  bcdDevice            3.00
  iManufacturer           1 OEM
  iProduct                2 RFID Device (COM)
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           67
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              250mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               2
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               0
      CDC Header:
        bcdCDC               1.10
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC ACM:
        bmCapabilities       0x06
          sends break
          line coding and serial state
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
Device Status:     0x0000
  (Bus Powered)

Signed-off-by: Maksim Salau 
Acked-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: add device-id for quirky printer

2017-07-27T22:03:26+00:00

commit fe855789d605590e57f9cd968d85ecce46f5c3fd upstream.

Add device-id entry for DATECS FP-2000 fiscal printer needing the
NO_UNION_NORMAL quirk.

Reported-by: Anton Avramov 
Signed-off-by: Johan Hovold 
Acked-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman