linux-stable.git/drivers/usb/class, branch v3.12.52

USB: cdc_acm: Ignore Infineon Flash Loader utility

2016-01-05T16:48:51+00:00

commit f33a7f72e5fc033daccbb8d4753d7c5c41a4d67b upstream.

Some modems, such as the Telit UE910, are using an Infineon Flash Loader
utility. It has two interfaces, 2/2/0 (Abstract Modem) and 10/0/0 (CDC
Data). The latter can be used as a serial interface to upgrade the
firmware of the modem. However, that isn't possible when the cdc-acm
driver takes control of the device.

The following is an explanation of the behaviour by Daniele Palmas during
discussion on linux-usb.

"This is what happens when the device is turned on (without modifying
the drivers):

[155492.352031] usb 1-3: new high-speed USB device number 27 using ehci-pci
[155492.485429] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
[155492.485436] usb 1-3: New USB device found, idVendor=058b, idProduct=0041
[155492.485439] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[155492.485952] cdc_acm 1-3:1.0: ttyACM0: USB ACM device

This is the flashing device that is caught by the cdc-acm driver. Once
the ttyACM appears, the application starts sending a magic string
(simple write on the file descriptor) to keep the device in flashing
mode. If this magic string is not properly received in a certain time
interval, the modem goes on in normal operative mode:

[155493.748094] usb 1-3: USB disconnect, device number 27
[155494.916025] usb 1-3: new high-speed USB device number 28 using ehci-pci
[155495.059978] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0021
[155495.059983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[155495.059986] usb 1-3: Product: 6 CDC-ACM + 1 CDC-ECM
[155495.059989] usb 1-3: Manufacturer: Telit
[155495.059992] usb 1-3: SerialNumber: 359658044004697
[155495.138958] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[155495.140832] cdc_acm 1-3:1.2: ttyACM1: USB ACM device
[155495.142827] cdc_acm 1-3:1.4: ttyACM2: USB ACM device
[155495.144462] cdc_acm 1-3:1.6: ttyACM3: USB ACM device
[155495.145967] cdc_acm 1-3:1.8: ttyACM4: USB ACM device
[155495.147588] cdc_acm 1-3:1.10: ttyACM5: USB ACM device
[155495.154322] cdc_ether 1-3:1.12 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, 00:00:11:12:13:14

Using the cdc-acm driver, the string, though being sent in the same way
than using the usb-serial-simple driver (I can confirm that the data is
passing properly since I used an hw usb sniffer), does not make the
device to stay in flashing mode."

Signed-off-by: Jonas Jonsson 
Tested-by: Daniele Palmas 
Signed-off-by: Johan Hovold 
Signed-off-by: Jiri Slaby

usblp: do not set TASK_INTERRUPTIBLE before lock

2016-01-05T15:23:35+00:00

commit 19cd80a214821f4b558560ebd76bfb2c38b4f3d8 upstream.

It is not permitted to set task state before lock. usblp_wwait sets
the state to TASK_INTERRUPTIBLE and calls mutex_lock_interruptible.
Upon return from that function, the state will be TASK_RUNNING again.

This is clearly a bug and a warning is generated with LOCKDEP too:
WARNING: CPU: 1 PID: 5109 at kernel/sched/core.c:7404 __might_sleep+0x7d/0x90()
do not call blocking ops when !TASK_RUNNING; state=1 set at [] usblp_wwait+0xa0/0x310 [usblp]
Modules linked in: ...
CPU: 1 PID: 5109 Comm: captmon Tainted: G        W       4.2.5-0.gef2823b-default #1
Hardware name: LENOVO 23252SG/23252SG, BIOS G2ET33WW (1.13 ) 07/24/2012
 ffffffff81a4edce ffff880236ec7ba8 ffffffff81716651 0000000000000000
 ffff880236ec7bf8 ffff880236ec7be8 ffffffff8106e146 0000000000000282
 ffffffff81a50119 000000000000028b 0000000000000000 ffff8802dab7c508
Call Trace:
...
 [] warn_slowpath_fmt+0x46/0x50
 [] __might_sleep+0x7d/0x90
 [] mutex_lock_interruptible_nested+0x2f/0x4b0
 [] usblp_wwait+0xcc/0x310 [usblp]
 [] usblp_write+0x72/0x350 [usblp]
 [] __vfs_write+0x28/0xf0
...

Commit 7f477358e2384c54b190cc3b6ce28277050a041b (usblp: Implement the
ENOSPC convention) moved the set prior locking. So move it back after
the lock.

Signed-off-by: Jiri Slaby 
Fixes: 7f477358e2 ("usblp: Implement the ENOSPC convention")
Acked-By: Pete Zaitcev 
Signed-off-by: Jiri Slaby 
Signed-off-by: Jiri Slaby

USB: usbtmc: add device quirk for Rigol DS6104

2015-10-07T07:24:56+00:00

commit f50420223071b6ff4b586308f5c27eec54694a81 upstream.

Recently we purchased the Rigol DS6104 and when I try to operate it from
my Linux pc, everything works well with the default usbtmc driver,
except when I want to download a big datachunk like a screenshot. This
bitmapfile has a size of 1152054 bytes but I receive a smaller file and
no new packets can be read.

When I took a look at the driver source, I found this "Rigol quirk" and
I added the id of the new DS series oscilloscopes to this list. I
compiled it and loaded the new driver and now everything seems to work
fine.

Signed-off-by: Teunis van Beelen 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

cdc-wdm: fix endianness bug in debug statements

2015-05-04T09:49:49+00:00

commit 323ece54e0761198946ecd0c2091f1d2bfdfcb64 upstream.

Values directly from descriptors given in debug statements
must be converted to native endianness.

Signed-off-by: Oliver Neukum 
Signed-off-by: Jiri Slaby

cdc-acm: Add support for Denso cradle CU-321

2015-03-12T16:31:25+00:00

commit b20b1618b8fca858c83e52da4aa22cd6b13b0359 upstream.

In order to support an older USB cradle by Denso, I added its vendor- and product-ID to the array of usb_device_id acm_ids. In this way cdc-acm feels responsible for this cradle. The related /dev/ttyACM node is being created properly, and the data transfer works.

However, later cradle models by Denso do have proper descriptors, so the patch is not required for these. At the same time both the older and the later model have the same vendor- and product-ID, but they both work with the patched driver.

Declaration of the Denso cradles I tested:
- both models have the same IDs: vendorID 0x076d, productID 0x0006
- older model: Denso CU-321 (descriptors not properly set)
- later model: Denso CU-821 (with proper descriptors)

Signed-off-by: Bjoern Gerhart 
Acked-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Jiri Slaby

cdc-acm: memory leak in error case

2015-01-26T13:38:58+00:00

commit d908f8478a8d18e66c80a12adb27764920c1f1ca upstream.

If probe() fails not only the attributes need to be removed
but also the memory freed.

Reported-by: Ahmed Tamrawi 
Signed-off-by: Oliver Neukum 
Signed-off-by: Jiri Slaby

USB: cdc-acm: check for valid interfaces

2015-01-26T13:38:56+00:00

commit 403dff4e2c94f275e24fd85f40b2732ffec268a1 upstream.

We need to check that we have both a valid data and control inteface for both
types of headers (union and not union.)

References: https://bugzilla.kernel.org/show_bug.cgi?id=83551
Reported-by: Simon Schubert <2+kernel@0x2c.org>
Signed-off-by: Jiri Slaby

USB: cdc-acm: only raise DTR on transitions from B0

2014-11-13T18:02:45+00:00

commit 4473d054ceb572557954f9536731d39b20937b0c upstream.

Make sure to only raise DTR on transitions from B0 in set_termios.

Also allow set_termios to be called from open with a termios_old of
NULL. Note that DTR will not be raised prematurely in this case.

Signed-off-by: Johan Hovold 
Signed-off-by: Jiri Slaby

USB: cdc-acm: add device id for GW Instek AFG-2225

2014-11-13T18:02:45+00:00

commit cf84a691a61606a2e7269907d3727e2d9fa148ee upstream.

Add device-id entry for GW Instek AFG-2225, which has a byte swapped
bInterfaceSubClass (0x20).

Reported-by: Karl Palsson 
Signed-off-by: Johan Hovold 
Signed-off-by: Jiri Slaby

USB: cdc-acm: fix runtime PM imbalance at shutdown

2014-07-02T10:05:47+00:00

commit 5292afa657d0e790b7479ad8eef9450c1e040b3d upstream.

Make sure only to decrement the PM counters if they were actually
incremented.

Note that the USB PM counter, but not necessarily the driver core PM
counter, is reset when the interface is unbound.

Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices
that support remote wakeup")

Signed-off-by: Johan Hovold 
Signed-off-by: Jiri Slaby