linux-stable.git/drivers/usb/class, branch linux-4.9.y Linux kernel stable tree USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020) 2022-09-15T10:39:45+00:00 Thierry GUIBERT thierry.guibert@croix-rouge.fr 2022-08-19T08:17:02+00:00 b420f94e3ee37da7afebf85be0492ac9d837ea83 commit a10bc71729b236fe36de0d8e4d35c959fd8dec3a upstream. Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver enabling the AT serial port. The Vendor Id is 0x0C26 The Product ID is 0x0020 Output of lsusb : Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0c26 Prolific Technology Inc. idProduct 0x0020 bcdDevice 0.00 iManufacturer 1 ICOM Inc. iProduct 2 ICOM Radio iSerial 3 *obfuscated* bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0030 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a10bc71729b236fe36de0d8e4d35c959fd8dec3a upstream.

Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver
enabling the AT serial port.
The Vendor Id is 0x0C26
The Product ID is 0x0020

Output of lsusb :
Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            2 Communications
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0c26 Prolific Technology Inc.
  idProduct          0x0020
  bcdDevice            0.00
  iManufacturer           1 ICOM Inc.
  iProduct                2 ICOM Radio
  iSerial                 3 *obfuscated*
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0030
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: cdc-wdm: fix reading stuck on device close 2022-05-18T07:15:43+00:00 Sergey Ryazanov ryazanov.s.a@gmail.com 2022-05-01T17:58:28+00:00 90bcb9afaeaa7943dafe4e7ad6c01ba6dddf8b08 commit 01e01f5c89773c600a9f0b32c888de0146066c3a upstream. cdc-wdm tracks whether a response reading request is in-progress and blocks the next request from being sent until the previous request is completed. As soon as last user closes the cdc-wdm device file, the driver cancels any ongoing requests, resets the pending response counter, but leaves the response reading in-progress flag (WDM_RESPONDING) untouched. So if the user closes the device file during the response receive request is being performed, no more data will be obtained from the modem. The request will be cancelled, effectively preventing the WDM_RESPONDING flag from being reseted. Keeping the flag set will prevent a new response receive request from being sent, permanently blocking the read path. The read path will staying blocked until the module will be reloaded or till the modem will be re-attached. This stuck has been observed with a Huawei E3372 modem attached to an OpenWrt router and using the comgt utility to set up a network connection. Fix this issue by clearing the WDM_RESPONDING flag on the device file close. Without this fix, the device reading stuck can be easily reproduced in a few connection establishing attempts. With this fix, a load test for modem connection re-establishing worked for several hours without any issues. Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device") Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 01e01f5c89773c600a9f0b32c888de0146066c3a upstream.

cdc-wdm tracks whether a response reading request is in-progress and
blocks the next request from being sent until the previous request is
completed. As soon as last user closes the cdc-wdm device file, the
driver cancels any ongoing requests, resets the pending response
counter, but leaves the response reading in-progress flag
(WDM_RESPONDING) untouched.

So if the user closes the device file during the response receive
request is being performed, no more data will be obtained from the
modem. The request will be cancelled, effectively preventing the
WDM_RESPONDING flag from being reseted. Keeping the flag set will
prevent a new response receive request from being sent, permanently
blocking the read path. The read path will staying blocked until the
module will be reloaded or till the modem will be re-attached.

This stuck has been observed with a Huawei E3372 modem attached to an
OpenWrt router and using the comgt utility to set up a network
connection.

Fix this issue by clearing the WDM_RESPONDING flag on the device file
close.

Without this fix, the device reading stuck can be easily reproduced in a
few connection establishing attempts. With this fix, a load test for
modem connection re-establishing worked for several hours without any
issues.

Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device")
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cdc-acm: fix break reporting 2021-10-17T08:05:38+00:00 Johan Hovold johan@kernel.org 2021-09-29T09:09:37+00:00 29e0a6c4d9b98e2ebc9130bc391ed72aafe1786f commit 58fc1daa4d2e9789b9ffc880907c961ea7c062cc upstream. A recent change that started reporting break events forgot to push the event to the line discipline, which meant that a detected break would not be reported until further characters had been receive (the port could even have been closed and reopened in between). Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 58fc1daa4d2e9789b9ffc880907c961ea7c062cc upstream.

A recent change that started reporting break events forgot to push the
event to the line discipline, which meant that a detected break would
not be reported until further characters had been receive (the port
could even have been closed and reopened in between).

Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cdc-acm: fix racy tty buffer accesses 2021-10-17T08:05:38+00:00 Johan Hovold johan@kernel.org 2021-09-29T09:09:36+00:00 4724fe0c147316e0da40e28f53ed170b40dcc9e4 commit 65a205e6113506e69a503b61d97efec43fc10fd7 upstream. A recent change that started reporting break events to the line discipline caused the tty-buffer insertions to no longer be serialised by inserting events also from the completion handler for the interrupt endpoint. Completion calls for distinct endpoints are not guaranteed to be serialised. For example, in case a host-controller driver uses bottom-half completion, the interrupt and bulk-in completion handlers can end up running in parallel on two CPUs (high-and low-prio tasklets, respectively) thereby breaking the tty layer's single producer assumption. Fix this by holding the read lock also when inserting characters from the bulk endpoint. Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210929090937.7410-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 65a205e6113506e69a503b61d97efec43fc10fd7 upstream.

A recent change that started reporting break events to the line
discipline caused the tty-buffer insertions to no longer be serialised
by inserting events also from the completion handler for the interrupt
endpoint.

Completion calls for distinct endpoints are not guaranteed to be
serialised. For example, in case a host-controller driver uses
bottom-half completion, the interrupt and bulk-in completion handlers
can end up running in parallel on two CPUs (high-and low-prio tasklets,
respectively) thereby breaking the tty layer's single producer
assumption.

Fix this by holding the read lock also when inserting characters from
the bulk endpoint.

Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210929090937.7410-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: usbtmc: Fix RCU stall warning 2021-08-15T11:01:02+00:00 Qiang.zhang qiang.zhang@windriver.com 2021-07-23T00:43:34+00:00 adfb8b5476e7c4627e22428be6f8f18f052ace47 commit 30fad76ce4e98263edfa8f885c81d5426c1bf169 upstream. rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (2 ticks this GP) idle=d92/1/0x4000000000000000 softirq=25390/25392 fqs=3 (t=12164 jiffies g=31645 q=43226) rcu: rcu_preempt kthread starved for 12162 jiffies! g31645 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task ........... usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: usb_submit_urb failed: -19 The function usbtmc_interrupt() resubmits urbs when the error status of an urb is -EPROTO. In systems using the dummy_hcd usb controller this can result in endless interrupt loops when the usbtmc device is disconnected from the host system. Since host controller drivers already try to recover from transmission errors, there is no need to resubmit the urb or try other solutions to repair the error situation. In case of errors the INT pipe just stops to wait for further packets. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation") Cc: stable@vger.kernel.org Reported-by: syzbot+e2eae5639e7203360018@syzkaller.appspotmail.com Signed-off-by: Qiang.zhang <qiang.zhang@windriver.com> Acked-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Link: https://lore.kernel.org/r/20210723004334.458930-1-qiang.zhang@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 30fad76ce4e98263edfa8f885c81d5426c1bf169 upstream.

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    1-...!: (2 ticks this GP) idle=d92/1/0x4000000000000000
        softirq=25390/25392 fqs=3
        (t=12164 jiffies g=31645 q=43226)
rcu: rcu_preempt kthread starved for 12162 jiffies! g31645 f0x0
     RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu:    Unless rcu_preempt kthread gets sufficient CPU time,
        OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt     state:R  running task
...........
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: usb_submit_urb failed: -19

The function usbtmc_interrupt() resubmits urbs when the error status
of an urb is -EPROTO. In systems using the dummy_hcd usb controller
this can result in endless interrupt loops when the usbtmc device is
disconnected from the host system.

Since host controller drivers already try to recover from transmission
errors, there is no need to resubmit the urb or try other solutions
to repair the error situation.

In case of errors the INT pipe just stops to wait for further packets.

Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation")
Cc: stable@vger.kernel.org
Reported-by: syzbot+e2eae5639e7203360018@syzkaller.appspotmail.com
Signed-off-by: Qiang.zhang <qiang.zhang@windriver.com>
Acked-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Link: https://lore.kernel.org/r/20210723004334.458930-1-qiang.zhang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cdc-acm: blacklist Heimann USB Appset device 2021-07-20T14:20:56+00:00 Hannu Hartikainen hannu@hrtk.in 2021-06-22T14:14:54+00:00 a45095718804ce2e76ab9f3f84906a2ab14b984c commit 4897807753e078655a78de39ed76044d784f3e63 upstream. The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be a CDC-ACM device in its descriptors but in fact is not. If it is run with echo disabled it returns garbled data, probably due to something that happens in the TTY layer. And when run with echo enabled (the default), it will mess up the calibration data of the sensor the first time any data is sent to the device. In short, I had a bad time after connecting the sensor and trying to get it to work. I hope blacklisting it in the cdc-acm driver will save someone else a bit of trouble. Signed-off-by: Hannu Hartikainen <hannu@hrtk.in> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210622141454.337948-1-hannu@hrtk.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4897807753e078655a78de39ed76044d784f3e63 upstream.

The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be
a CDC-ACM device in its descriptors but in fact is not. If it is run
with echo disabled it returns garbled data, probably due to something
that happens in the TTY layer. And when run with echo enabled (the
default), it will mess up the calibration data of the sensor the first
time any data is sent to the device.

In short, I had a bad time after connecting the sensor and trying to get
it to work. I hope blacklisting it in the cdc-acm driver will save
someone else a bit of trouble.

Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210622141454.337948-1-hannu@hrtk.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cdc-acm: fix unprivileged TIOCCSERIAL 2021-05-22T08:40:24+00:00 Johan Hovold johan@kernel.org 2021-04-08T13:16:01+00:00 ff0a02ce435df75a3ed42141bc54e60319743009 [ Upstream commit dd5619582d60007139f0447382d2839f4f9e339b ] TIOCSSERIAL is a horrid, underspecified, legacy interface which for most serial devices is only useful for setting the close_delay and closing_wait parameters. A non-privileged user has only ever been able to set the since long deprecated ASYNC_SPD flags and trying to change any other *supported* feature should result in -EPERM being returned. Setting the current values for any supported features should return success. Fix the cdc-acm implementation which instead indicated that the TIOCSSERIAL ioctl was not even implemented when a non-privileged user set the current values. Fixes: ba2d8ce9db0a ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210408131602.27956-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dd5619582d60007139f0447382d2839f4f9e339b ]

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.

Fix the cdc-acm implementation which instead indicated that the
TIOCSSERIAL ioctl was not even implemented when a non-privileged user
set the current values.

Fixes: ba2d8ce9db0a ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210408131602.27956-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
USB: cdc-acm: fix use-after-free after probe failure 2021-04-07T10:05:41+00:00 Johan Hovold johan@kernel.org 2021-03-22T15:53:12+00:00 2ca049e0e2b0cb31468dffbb407891870d8e1187 commit 4e49bf376c0451ad2eae2592e093659cde12be9a upstream. If tty-device registration fails the driver would fail to release the data interface. When the device is later disconnected, the disconnect callback would still be called for the data interface and would go about releasing already freed resources. Fixes: c93d81955005 ("usb: cdc-acm: fix error handling in acm_probe()") Cc: stable@vger.kernel.org # 3.9 Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4e49bf376c0451ad2eae2592e093659cde12be9a upstream.

If tty-device registration fails the driver would fail to release the
data interface. When the device is later disconnected, the disconnect
callback would still be called for the data interface and would go about
releasing already freed resources.

Fixes: c93d81955005 ("usb: cdc-acm: fix error handling in acm_probe()")
Cc: stable@vger.kernel.org      # 3.9
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: cdc-acm: downgrade message to debug 2021-04-07T10:05:41+00:00 Oliver Neukum oneukum@suse.com 2021-03-11T13:01:26+00:00 e7fa184b40d8baa4ec62284d7b98f2d506c3fdca commit e4c77070ad45fc940af1d7fb1e637c349e848951 upstream. This failure is so common that logging an error here amounts to spamming log files. Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e4c77070ad45fc940af1d7fb1e637c349e848951 upstream.

This failure is so common that logging an error here amounts
to spamming log files.

Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cdc-acm: fix BREAK rx code path adding necessary calls 2021-04-07T10:05:41+00:00 Oliver Neukum oneukum@suse.com 2021-03-11T13:37:14+00:00 c611624eea8ecf84c35416de0af8e923fbb5c2f6 commit 08dff274edda54310d6f1cf27b62fddf0f8d146e upstream. Counting break events is nice but we should actually report them to the tty layer. Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 08dff274edda54310d6f1cf27b62fddf0f8d146e upstream.

Counting break events is nice but we should actually report them to
the tty layer.

Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>