linux-stable.git/drivers/usb/chipidea, branch v6.5.2

usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0

2023-09-06T20:22:23+00:00

commit 36668515d56bf73f06765c71e08c8f7465f1e5c4 upstream.

In current driver, the value of tuning parameter will not take effect
if samsung,picophy-* is assigned as 0. Because 0 is also a valid value
acccording to the description of USB_PHY_CFG1 register, this will improve
the logic to let it work.

Fixes: 58a3cefb3840 ("usb: chipidea: imx: add two samsung picophy parameters tuning implementation")
cc: 
Signed-off-by: Xu Yang 
Acked-by: Peter Chen 
Link: https://lore.kernel.org/r/20230627112126.1882666-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: imx: add missing USB PHY DPDM wakeup setting

2023-06-13T10:05:42+00:00

USB PHY DPDM wakeup bit is enabled by default, when USB wakeup
is not required(/sys/.../wakeup is disabled), this bit should be
disabled, otherwise we will have unexpected wakeup if do USB device
connect/disconnect while system sleep.
This bit can be enabled for both host and device mode.

Signed-off-by: Li Jun 
Signed-off-by: Xu Yang 
Acked-by: Peter Chen 
Message-ID: <20230517081907.3410465-3-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: imx: turn off vbus comparator when suspend

2023-06-13T10:05:42+00:00

As we use bvalid for vbus wakeup source, to save power when
suspend, turn off the vbus comparator for imx7d and imx8mm.

Below is this bit description from RM of iMX8MM
"VBUS Valid Comparator Enable:

This signal controls the USB OTG PHY VBUS Valid comparator which
indicates whether the voltage on the USB_OTG*_VBUS pin is below
the VBUS Valid threshold. The VBUS Valid threshold is nominally
4.75V on this USB PHY. The VBUS Valid threshold can be adjusted
using the USBNC_OTGn_PHY_CFG1[OTGTUNE0] bit field. Status of the
VBUS Valid comparator, when it is enabled, is reported on the
USBNC_OTGn_PHY_STATUS[VBUS_VLD] bit.
When OTGDISABLE0 (USBNC_USB_OTGx_PHY_CFG2[10])is set to 1'b0 and
DRVVBUS0 is set to 1'b1, the Bandgap circuitry and VBUS Valid
comparator are powered, even in Suspend or Sleep mode.
DRVVBUS0 should be reset to 1'b0 when the internal VBUS Valid comparator
is not required, to reduce quiescent current in Suspend or Sleep mode.
 - 0 The VBUS Valid comparator is disabled
  - 1 The VBUS Valid comparator is enabled"

Signed-off-by: Li Jun 
Signed-off-by: Xu Yang 
Acked-by: Peter Chen 
Message-ID: <20230517081907.3410465-2-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: imx: don't request QoS for imx8ulp

2023-06-13T09:57:11+00:00

Use dedicated imx8ulp usb compatible to remove QoS request
since imx8ulp has no such limitation of imx7ulp: DMA will
not work if system enters idle.

Signed-off-by: Xu Yang 
Signed-off-by: Li Jun 
Acked-by: Peter Chen 
Message-ID: <20230530104007.1294702-2-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: imx: remove one duplicated reg define

2023-05-29T14:49:25+00:00

Remove one duplicated definition of MX7D_USB_OTG_PHY_CFG1.

Signed-off-by: Li Jun 
Signed-off-by: Xu Yang 
Link: https://lore.kernel.org/r/20230517081907.3410465-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: chipidea/core: Convert to platform remove callback returning void

2023-05-28T11:36:15+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20230517230239.187727-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

usb: chipidea/ci_hdrc_usb2: Convert to platform remove callback returning void

2023-05-28T11:36:15+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20230517230239.187727-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

usb: chipidea/ci_hdrc_tegra: Convert to platform remove callback returning void

2023-05-28T11:36:15+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20230517230239.187727-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

usb: chipidea/ci_hdrc_msm: Convert to platform remove callback returning void

2023-05-28T11:36:15+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20230517230239.187727-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

usb: chipidea/ci_hdrc_imx: Convert to platform remove callback returning void

2023-05-28T11:36:15+00:00

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20230517230239.187727-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman