linux-stable.git/drivers/usb/chipidea, branch v6.1.44

usb: chipidea: fix missing goto in `ci_hdrc_probe`

2023-05-11T14:03:30+00:00

[ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ]

From the comment of ci_usb_phy_init, it returns an error code if
usb_phy_init has failed, and it should do some clean up, not just
return directly.

Fix this by goto the error handling.

Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core")
Reviewed-by: Dongliang Mu 
Acked-by: Peter Chen 
Signed-off-by: Yinhao Hu 
Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: chipidea: core: fix possible concurrent when switch role

2023-03-30T10:49:24+00:00

commit 451b15ed138ec15bffbebb58a00ebdd884c3e659 upstream.

The user may call role_store() when driver is handling
ci_handle_id_switch() which is triggerred by otg event or power lost
event. Unfortunately, the controller may go into chaos in this case.
Fix this by protecting it with mutex lock.

Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: 
Acked-by: Peter Chen 
Signed-off-by: Xu Yang 
Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: chipdea: core: fix return -EINVAL if request role is the same with current role

2023-03-30T10:49:24+00:00

commit 3670de80678961eda7fa2220883fc77c16868951 upstream.

It should not return -EINVAL if the request role is the same with current
role, return non-error and without do anything instead.

Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: 
Acked-by: Peter Chen 
Signed-off-by: Xu Yang 
Link: https://lore.kernel.org/r/20230317061516.2451728-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

USB: chipidea: fix memory leak with using debugfs_lookup()

2023-03-11T12:55:36+00:00

[ Upstream commit ff35f3ea3baba5b81416ac02d005cfbf6dd182fa ]

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Cc: Peter Chen 
Link: https://lore.kernel.org/r/20230202153235.2412790-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: chipidea: fix deadlock in ci_otg_del_timer

2022-11-09T11:34:18+00:00

There is a deadlock in ci_otg_del_timer(), the process is
shown below:

    (thread 1)                  |        (thread 2)
ci_otg_del_timer()              | ci_otg_hrtimer_func()
  ...                           |
  spin_lock_irqsave() //(1)     |  ...
  ...                           |
  hrtimer_cancel()              |  spin_lock_irqsave() //(2)
  (block forever)

We hold ci->lock in position (1) and use hrtimer_cancel() to
wait ci_otg_hrtimer_func() to stop, but ci_otg_hrtimer_func()
also need ci->lock in position (2). As a result, the
hrtimer_cancel() in ci_otg_del_timer() will be blocked forever.

This patch extracts hrtimer_cancel() from the protection of
spin_lock_irqsave() in order that the ci_otg_hrtimer_func()
could obtain the ci->lock.

What`s more, there will be no race happen. Because the
"next_timer" is always under the protection of
spin_lock_irqsave() and we only check whether "next_timer"
equals to NUM_OTG_FSM_TIMERS in the following code.

Fixes: 3a316ec4c91c ("usb: chipidea: use hrtimer for otg fsm timers")
Cc: stable 
Signed-off-by: Duoming Zhou 
Link: https://lore.kernel.org/r/20220918033312.94348-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: make configs for glue drivers visible with EXPERT

2022-09-08T11:32:50+00:00

Commit 6a108a14fa35 ("kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT")
introduces CONFIG_EXPERT to carry the previous intent of CONFIG_EMBEDDED
and just gives that intent a much better name. That has been clearly a good
and long overdue renaming, and it is clearly an improvement to the kernel
build configuration that has shown to help managing the kernel build
configuration in the last decade.

However, rather than bravely and radically just deleting CONFIG_EMBEDDED,
this commit gives CONFIG_EMBEDDED a new intended semantics, but keeps it
open for future contributors to implement that intended semantics:

    A new CONFIG_EMBEDDED option is added that automatically selects
    CONFIG_EXPERT when enabled and can be used in the future to isolate
    options that should only be considered for embedded systems (RISC
    architectures, SLOB, etc).

Since then, this CONFIG_EMBEDDED implicitly had two purposes:

  - It can make even more options visible beyond what CONFIG_EXPERT makes
    visible. In other words, it may introduce another level of enabling the
    visibility of configuration options: always visible, visible with
    CONFIG_EXPERT and visible with CONFIG_EMBEDDED.

  - Set certain default values of some configurations differently,
    following the assumption that configuring a kernel build for an
    embedded system generally starts with a different set of default values
    compared to kernel builds for all other kind of systems.

Considering the first purpose, at the point in time where CONFIG_EMBEDDED
was renamed to CONFIG_EXPERT, CONFIG_EXPERT already made 130 more options
become visible throughout all different menus for the kernel configuration.
Over the last decade, this has gradually increased, so that currently, with
CONFIG_EXPERT, roughly 170 more options become visible throughout all
different menus for the kernel configuration. In comparison, currently with
CONFIG_EMBEDDED enabled, just seven more options are visible, one in x86,
one in arm, and five for the ChipIdea Highspeed Dual Role Controller.

As the numbers suggest, these two levels of enabling the visibility of even
more configuration options---beyond what CONFIG_EXPERT enables---never
evolved to a good solution in the last decade. In other words, this
additional level of visibility of configuration option with CONFIG_EMBEDDED
compared to CONFIG_EXPERT has since its introduction never become really
valuable. It requires quite some investigation to actually understand what
is additionally visible and it does not differ significantly in complexity
compared to just enabling CONFIG_EXPERT. This CONFIG_EMBEDDED---or any
other config to show more detailed options beyond CONFIG_EXPERT---is
unlikely to be valuable unless somebody puts significant effort in
identifying how such visibility options can be properly split and creating
clear criteria, when some config option is visible with CONFIG_EXPERT and
when some config option is visible only with some further option enabled
beyond CONFIG_EXPERT, such as CONFIG_EMBEDDED attempted to do. For now, it
is much more reasonable to simply make those additional seven options that
visible with CONFIG_EMBEDDED, visible with CONFIG_EXPERT, and then remove
CONFIG_EMBEDDED. If anyone spends significant effort in structuring the
visibility of config options, they may re-introduce suitable new config
options simply as they see fit.

Make the configs for usb chipidea glue drivers visible when CONFIG_EXPERT
is enabled.

Signed-off-by: Lukas Bulwahn 
Link: https://lore.kernel.org/r/20220908104337.11940-5-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Add support for VBUS control with PHY

2022-08-31T07:07:52+00:00

Some platforms make use of VBUS control over PHY which means controller
driver has to access PHY registers to turn on/off VBUS line.This patch
adds support for such platforms in chipidea.

Flag 'CI_HDRC_PHY_VBUS_CONTROL' added to support VBus control feature.

Acked-by: Peter Chen 
Signed-off-by: Piyush Mehta 
Signed-off-by: Piyush Mehta 
Link: https://lore.kernel.org/r/20220822054051.2941282-1-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman

Merge tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2022-08-05T16:41:12+00:00

Pull tracing updates from Steven Rostedt:

 - Runtime verification infrastructure

   This is the biggest change here. It introduces the runtime
   verification that is necessary for running Linux on safety critical
   systems.

   It allows for deterministic automata models to be inserted into the
   kernel that will attach to tracepoints, where the information on
   these tracepoints will move the model from state to state.

   If a state is encountered that does not belong to the model, it will
   then activate a given reactor, that could just inform the user or
   even panic the kernel (for which safety critical systems will detect
   and can recover from).

 - Two monitor models are also added: Wakeup In Preemptive (WIP - not to
   be confused with "work in progress"), and Wakeup While Not Running
   (WWNR).

 - Added __vstring() helper to the TRACE_EVENT() macro to replace
   several vsnprintf() usages that were all doing it wrong.

 - eprobes now can have their event autogenerated when the event name is
   left off.

 - The rest is various cleanups and fixes.

* tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
  rv: Unlock on error path in rv_unregister_reactor()
  tracing: Use alignof__(struct {type b;}) instead of offsetof()
  tracing/eprobe: Show syntax error logs in error_log file
  scripts/tracing: Fix typo 'the the' in comment
  tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT
  tracing: Use free_trace_buffer() in allocate_trace_buffers()
  tracing: Use a struct alignof to determine trace event field alignment
  rv/reactor: Add the panic reactor
  rv/reactor: Add the printk reactor
  rv/monitor: Add the wwnr monitor
  rv/monitor: Add the wip monitor
  rv/monitor: Add the wip monitor skeleton created by dot2k
  Documentation/rv: Add deterministic automata instrumentation documentation
  Documentation/rv: Add deterministic automata monitor synthesis documentation
  tools/rv: Add dot2k
  Documentation/rv: Add deterministic automaton documentation
  tools/rv: Add dot2c
  Documentation/rv: Add a basic documentation
  rv/include: Add instrumentation helper functions
  rv/include: Add deterministic automata monitor definition via C macros
  ...

usb/chipidea: fix repeated words in comments

2022-07-27T12:38:01+00:00

 Delete the redundant word 'power'.

Acked-by: Peter Chen 
Signed-off-by: Jilin Yuan 
Link: https://lore.kernel.org/r/20220716131630.33151-1-yuanjilin@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: tracing: Use the new __vstring() helper

2022-07-15T21:44:40+00:00

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224749.991587733@goodmis.org

Cc: Peter Chen 
Cc: Ingo Molnar 
Cc: Andrew Morton 
Cc: Greg Kroah-Hartman 
Cc: linux-usb@vger.kernel.org
Signed-off-by: Steven Rostedt (Google)