linux-stable.git/drivers/usb/chipidea, branch v5.8

usb: chipidea: core: add wakeup support for extcon

2020-07-07T17:57:21+00:00

If wakeup event occurred by extcon event, it needs to call
ci_irq again since the first ci_irq calling at extcon notifier
only wakes up controller, but do noop for event handling,
it causes the extcon use case can't work well from low power mode.

Cc: 
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Reported-by: Philippe Schenker 
Tested-by: Philippe Schenker 
Signed-off-by: Peter Chen 
Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-ci-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next

2020-05-26T08:27:14+00:00

Peter writes:

- Some improvments for ci_hdrc_usb2.c
- Support imx7d USB charger
- Add software sg support for UDC
- Enable user trigger role switch

* tag 'usb-ci-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
  usb: chipidea: Enable user-space triggered role-switching
  usb: chipidea: udc: add software sg list support
  usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulp
  usb: chipidea: pull down dp for possible charger detection operation
  usb: chipidea: introduce imx7d USB charger detection
  usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use
  usb: chipidea: usb2: remove unneeded semicolon
  usb: chipidea: allow disabling glue drivers if EMBEDDED
  usb: chipidea: usb2: absorb zevio glue driver
  usb: chipidea: usb2: make clock optional
  usb: chipidea: usb2: fix formatting
  usb: chipidea: usb2: constify zynq_pdata
  usb: chipidea: core: show the real pointer value for register
  usb: chipidea: core: refine the description for this driver
  usb: chipidea: udc: fix the kernel doc for udc.h

usb: chipidea: msm: Ensure proper controller reset using role switch API

2020-05-07T06:46:35+00:00

Currently we check to make sure there is no error state on the extcon
handle for VBUS when writing to the HS_PHY_GENCONFIG_2 register. When using
the USB role-switch API we still need to write to this register absent an
extcon handle.

This patch makes the appropriate update to ensure the write happens if
role-switching is true.

Fixes: 05559f10ed79 ("usb: chipidea: add role switch class support")
Cc: stable 
Cc: Greg Kroah-Hartman 
Cc: Philipp Zabel 
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Stephen Boyd 
Signed-off-by: Bryan O'Donoghue 
Signed-off-by: Peter Chen 
Link: https://lore.kernel.org/r/20200507004918.25975-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Enable user-space triggered role-switching

2020-05-06T01:45:24+00:00

The flag provided by the USB role-switch logic allow_userspace_control
allows user-space to trigger a role-switch. Several other USB controller
drivers already enable this feature. Let's switch it on for the chipidea
core now also.

Cc: Peter Chen 
Cc: Jun Li 
Cc: Greg Kroah-Hartman 
Cc: Liam Girdwood 
Cc: Mark Brown 
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Stephen Boyd 
Signed-off-by: Bryan O'Donoghue 
Signed-off-by: Peter Chen

usb: chipidea: udc: add software sg list support

2020-05-06T01:42:35+00:00

The chipidea controller doesn't support short transfer for sg list,
so we still keep setting IOC per TD, otherwise, there will be no interrupt
for short transfer. Each TD has five entries for data buffer, each data
buffer could be non-countinuous 4KB buffer, so it could handle
up to 5 sg buffers one time. The benefit of this patch is avoiding
OOM for low memory system(eg, 256MB) during large USB transfers, see
below for detail. The non-sg handling has not changed.

ufb: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP),
nodemask=(null),cpuset=/,mems_allowed=0
CPU: 2 PID: 370 Comm: ufb Not tainted 5.4.3-1.1.0+g54b3750d61fd #1
Hardware name: NXP i.MX8MNano DDR4 EVK board (DT)
Call trace:
 dump_backtrace+0x0/0x140
 show_stack+0x14/0x20
 dump_stack+0xb4/0xf8
 warn_alloc+0xec/0x158
 __alloc_pages_slowpath+0x9cc/0x9f8
 __alloc_pages_nodemask+0x21c/0x280
 alloc_pages_current+0x7c/0xe8
 kmalloc_order+0x1c/0x88
 __kmalloc+0x25c/0x298
 ffs_epfile_io.isra.0+0x20c/0x7d0
 ffs_epfile_read_iter+0xa8/0x188
 new_sync_read+0xe4/0x170
 __vfs_read+0x2c/0x40
 vfs_read+0xc8/0x1a0
 ksys_read+0x68/0xf0
 __arm64_sys_read+0x18/0x20
 el0_svc_common.constprop.0+0x68/0x160
 el0_svc_handler+0x20/0x80
 el0_svc+0x8/0xc
Mem-Info:
active_anon:2856 inactive_anon:5269 isolated_anon:12
 active_file:5238 inactive_file:18803 isolated_file:0
 unevictable:0 dirty:22 writeback:416 unstable:0
 slab_reclaimable:4073 slab_unreclaimable:3408
 mapped:727 shmem:7393 pagetables:37 bounce:0
 free:4104 free_pcp:118 free_cma:0
Node 0 active_anon:11436kB inactive_anon:21076kB active_file:20988kB inactive_file:75216kB unevictable:0kB isolated(ano
Node 0 DMA32 free:16820kB min:1808kB low:2260kB high:2712kB active_anon:11436kB inactive_anon:21076kB active_file:2098B
lowmem_reserve[]: 0 0 0
Node 0 DMA32: 508*4kB (UME) 242*8kB (UME) 730*16kB (UM) 21*32kB (UME) 5*64kB (UME) 2*128kB (M) 0*256kB 0*512kB 0*1024kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB
31455 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap  = 0kB
Total swap = 0kB
65536 pages RAM
0 pages HighMem/MovableOnly
10766 pages reserved
0 pages cma reserved
0 pages hwpoisoned

Reviewed-by: Jun Li 
Signed-off-by: Peter Chen

usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulp

2020-05-06T01:42:28+00:00

imx7ulp uses different USB PHY with imx7d (MXS PHY vs PICO PHY), so the
features are supported by non-core register are a little different.
For example, autoresume feature is supported by all controllers for
imx7ulp, but for imx7d, it is only supported by non-HSIC controller.

Besides, these two platforms use different HSIC controller, imx7ulp
needs software operation, but imx7d doesn't.

Signed-off-by: Peter Chen

usb: chipidea: pull down dp for possible charger detection operation

2020-05-06T01:42:21+00:00

The bootloader may use device mode, and keep dp up. We need dp
to be pulled down before possbile charger detection operation.

Signed-off-by: Peter Chen

usb: chipidea: introduce imx7d USB charger detection

2020-05-06T01:42:03+00:00

imx7d (and imx8mm, imx8mn) uses Samsung PHY and USB generic PHY driver.
The USB generic PHY driver is impossible to have a charger detection
for every user, so we implement USB charger detection routine at glue
layer. After the detection has finished, it will notify USB PHY
charger framework, and the uevents will be triggered.

Signed-off-by: Jun Li 
Signed-off-by: Peter Chen

usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use

2020-05-06T01:41:55+00:00

Some vendors glue layer need to handle some events for vbus, eg,
some i.mx platforms (imx7d, imx8mm, imx8mn, etc) needs vbus event
to handle charger detection, its charger detection is finished at
glue layer code, but not at USB PHY driver.

Signed-off-by: Peter Chen

usb: chipidea: usb2: remove unneeded semicolon

2020-04-29T01:47:19+00:00

Fix the following coccicheck warning:

drivers/usb/chipidea/ci_hdrc_usb2.c:75:28-29: Unneeded semicolon

Fixes: c2de37b31f17 ("usb: chipidea: usb2: make clock optional")
Reviewed-by: Michał Mirosław 
Signed-off-by: Jason Yan 
Signed-off-by: Peter Chen