linux-stable.git/drivers/usb/chipidea, branch v5.10.78 Linux kernel stable tree usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle 2021-10-13T08:04:23+00:00 Fabio Estevam festevam@gmail.com 2021-09-21T11:37:54+00:00 b3265b88e83b16c7be762fa5fb7e0632bce0002c commit 8253a34bfae3278baca52fc1209b7c29270486ca upstream. When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board. Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection") Cc: stable@vger.kernel.org Reported-by: Heiko Thiery <heiko.thiery@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210921113754.767631-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8253a34bfae3278baca52fc1209b7c29270486ca upstream.

When passing 'phys' in the devicetree to describe the USB PHY phandle
(which is the recommended way according to
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the
following NULL pointer dereference is observed on i.MX7 and i.MX8MM:

[    1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
[    1.498170] Mem abort info:
[    1.500966]   ESR = 0x96000044
[    1.504030]   EC = 0x25: DABT (current EL), IL = 32 bits
[    1.509356]   SET = 0, FnV = 0
[    1.512416]   EA = 0, S1PTW = 0
[    1.515569]   FSC = 0x04: level 0 translation fault
[    1.520458] Data abort info:
[    1.523349]   ISV = 0, ISS = 0x00000044
[    1.527196]   CM = 0, WnR = 1
[    1.530176] [0000000000000098] user address but active_mm is swapper
[    1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[    1.542125] Modules linked in:
[    1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3
[    1.551901] Hardware name: Kontron i.MX8MM N801X S (DT)
[    1.557133] Workqueue: events_unbound deferred_probe_work_func
[    1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
[    1.568998] pc : imx7d_charger_detection+0x3f0/0x510
[    1.573973] lr : imx7d_charger_detection+0x22c/0x510

This happens because the charger functions check for the phy presence
inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea
core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc'
(ci->usb_phy) instead.

This causes the NULL pointer dereference inside imx7d_charger_detection().

Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found.

Tested on a imx7s-warp board.

Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection")
Cc: stable@vger.kernel.org
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921113754.767631-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: host: fix port index underflow and UBSAN complains 2021-09-18T11:40:30+00:00 Li Jun jun.li@nxp.com 2021-06-18T08:28:58+00:00 2d3fab9ceafad925d30d0ea78f3a2b1bc8ce550b [ Upstream commit e5d6a7c6cfae9e714a0e8ff64facd1ac68a784c6 ] If wIndex is 0 (and it often is), these calculations underflow and UBSAN complains, here resolve this by not decrementing the index when it is equal to 0, this copies the solution from commit 85e3990bea49 ("USB: EHCI: avoid undefined pointer arithmetic and placate UBSAN") Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1624004938-2399-1-git-send-email-jun.li@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e5d6a7c6cfae9e714a0e8ff64facd1ac68a784c6 ]

If wIndex is 0 (and it often is), these calculations underflow and
UBSAN complains, here resolve this by not decrementing the index when
it is equal to 0, this copies the solution from commit 85e3990bea49
("USB: EHCI: avoid undefined pointer arithmetic and placate UBSAN")

Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1624004938-2399-1-git-send-email-jun.li@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection 2021-06-23T12:42:50+00:00 Breno Lima breno.lima@nxp.com 2021-06-14T17:50:13+00:00 1a91fafa3edcda7f05ffe60aa1ef7fb4f05f406b commit c6d580d96f140596d69220f60ce0cfbea4ee5c0f upstream. i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not following CDP timing requirements defined by USB BC 1.2 specification and section 3.2.4 Detection Timing CDP. During Primary Detection the i.MX device should turn on VDP_SRC and IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON, the i.MX is allowed to check the status of the D- line. Current implementation is waiting between 1ms and 2ms, and certain BC 1.2 complaint USB HUBs cannot be detected. Increase delay to 40ms allowing enough time for primary detection. During secondary detection the i.MX is required to disable VDP_SRC and IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON). Current implementation is not disabling VDP_SRC and IDM_SNK, introduce disable sequence in imx7d_charger_secondary_detection() function. VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON). Increase delay allowing enough time for detection. Cc: <stable@vger.kernel.org> Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection") Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Jun Li <jun.li@nxp.com> Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c6d580d96f140596d69220f60ce0cfbea4ee5c0f upstream.

i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not
following CDP timing requirements defined by USB BC 1.2 specification
and section 3.2.4 Detection Timing CDP.

During Primary Detection the i.MX device should turn on VDP_SRC and
IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON,
the i.MX is allowed to check the status of the D- line. Current
implementation is waiting between 1ms and 2ms, and certain BC 1.2
complaint USB HUBs cannot be detected. Increase delay to 40ms allowing
enough time for primary detection.

During secondary detection the i.MX is required to disable VDP_SRC and
IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON).

Current implementation is not disabling VDP_SRC and IDM_SNK, introduce
disable sequence in imx7d_charger_secondary_detection() function.

VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON).
Increase delay allowing enough time for detection.

Cc: <stable@vger.kernel.org>
Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection")
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: udc: assign interrupt number to USB gadget structure 2021-06-16T10:01:35+00:00 Li Jun jun.li@nxp.com 2021-05-14T10:59:44+00:00 2e2145ccfbcb0dd38d8423681d22b595ca735846 [ Upstream commit 9e3927f6373da54cb17e17f4bd700907e1123d2f ] Chipidea also need sync interrupt before unbind the udc while gadget remove driver, otherwise setup irq handling may happen while unbind, see below dump generated from android function switch stress test: [ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED [ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED [ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED [ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server) [ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14) [ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090 [ 4703.676454] Mem abort info: [ 4703.676458] ESR = 0x96000004 [ 4703.676461] EC = 0x25: DABT (current EL), IL = 32 bits [ 4703.676464] SET = 0, FnV = 0 [ 4703.676466] EA = 0, S1PTW = 0 [ 4703.676468] Data abort info: [ 4703.676471] ISV = 0, ISS = 0x00000004 [ 4703.676473] CM = 0, WnR = 0 [ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000 [ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000 [ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O) [ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G W O 5.10.9-00001-g3f5fd8487c38-dirty #63 [ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT) [ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8 [ 4703.789667] lr : android_setup+0x4c/0x168 [ 4703.793676] sp : ffff80001256bd80 [ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8 [ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000 [ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140 [ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490 [ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000 [ 4703.823554] x19: 0000000000000080 x18: ffff800012561048 [ 4703.828867] x17: 0000000000000000 x16: 0000000000000039 [ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277 [ 4703.839493] x13: 0000000000003934 x12: 0000000000000000 [ 4703.844805] x11: 0000000000000000 x10: 0000000000000001 [ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090 [ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450 [ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009 [ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8 [ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090 [ 4703.876681] Call trace: [ 4703.879129] _raw_write_unlock_bh+0xc0/0x2c8 [ 4703.883397] android_setup+0x4c/0x168 [ 4703.887059] udc_irq+0x824/0xa9c [ 4703.890287] ci_irq+0x124/0x148 [ 4703.893429] __handle_irq_event_percpu+0x84/0x268 [ 4703.898131] handle_irq_event+0x64/0x14c [ 4703.902054] handle_fasteoi_irq+0x110/0x210 [ 4703.906236] __handle_domain_irq+0x8c/0xd4 [ 4703.910332] gic_handle_irq+0x6c/0x124 [ 4703.914081] el1_irq+0xdc/0x1c0 [ 4703.917221] _raw_spin_unlock_irq+0x20/0x54 [ 4703.921405] finish_task_switch+0x84/0x224 [ 4703.925502] __schedule+0x4a4/0x734 [ 4703.928990] schedule+0xa0/0xe8 [ 4703.932132] do_notify_resume+0x150/0x184 [ 4703.936140] work_pending+0xc/0x40c [ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01) [ 4703.945732] ---[ end trace ba5c1875ae49d53c ]--- [ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 4703.957223] SMP: stopping secondary CPUs [ 4703.961151] Kernel Offset: disabled [ 4703.964638] CPU features: 0x0240002,2000200c [ 4703.968905] Memory Limit: none [ 4703.971963] Rebooting in 5 seconds.. Tested-by: faqiang.zhu <faqiang.zhu@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9e3927f6373da54cb17e17f4bd700907e1123d2f ]

Chipidea also need sync interrupt before unbind the udc while
gadget remove driver, otherwise setup irq handling may happen
while unbind, see below dump generated from android function
switch stress test:

[ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED
[ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED
[ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED
[ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server)
[ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14)
[ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090
[ 4703.676454] Mem abort info:
[ 4703.676458]   ESR = 0x96000004
[ 4703.676461]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 4703.676464]   SET = 0, FnV = 0
[ 4703.676466]   EA = 0, S1PTW = 0
[ 4703.676468] Data abort info:
[ 4703.676471]   ISV = 0, ISS = 0x00000004
[ 4703.676473]   CM = 0, WnR = 0
[ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000
[ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000
[ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O)
[ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G        W  O      5.10.9-00001-g3f5fd8487c38-dirty #63
[ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT)
[ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8
[ 4703.789667] lr : android_setup+0x4c/0x168
[ 4703.793676] sp : ffff80001256bd80
[ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8
[ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000
[ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140
[ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490
[ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000
[ 4703.823554] x19: 0000000000000080 x18: ffff800012561048
[ 4703.828867] x17: 0000000000000000 x16: 0000000000000039
[ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277
[ 4703.839493] x13: 0000000000003934 x12: 0000000000000000
[ 4703.844805] x11: 0000000000000000 x10: 0000000000000001
[ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090
[ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450
[ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009
[ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8
[ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090
[ 4703.876681] Call trace:
[ 4703.879129]  _raw_write_unlock_bh+0xc0/0x2c8
[ 4703.883397]  android_setup+0x4c/0x168
[ 4703.887059]  udc_irq+0x824/0xa9c
[ 4703.890287]  ci_irq+0x124/0x148
[ 4703.893429]  __handle_irq_event_percpu+0x84/0x268
[ 4703.898131]  handle_irq_event+0x64/0x14c
[ 4703.902054]  handle_fasteoi_irq+0x110/0x210
[ 4703.906236]  __handle_domain_irq+0x8c/0xd4
[ 4703.910332]  gic_handle_irq+0x6c/0x124
[ 4703.914081]  el1_irq+0xdc/0x1c0
[ 4703.917221]  _raw_spin_unlock_irq+0x20/0x54
[ 4703.921405]  finish_task_switch+0x84/0x224
[ 4703.925502]  __schedule+0x4a4/0x734
[ 4703.928990]  schedule+0xa0/0xe8
[ 4703.932132]  do_notify_resume+0x150/0x184
[ 4703.936140]  work_pending+0xc/0x40c
[ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01)
[ 4703.945732] ---[ end trace ba5c1875ae49d53c ]---
[ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 4703.957223] SMP: stopping secondary CPUs
[ 4703.961151] Kernel Offset: disabled
[ 4703.964638] CPU features: 0x0240002,2000200c
[ 4703.968905] Memory Limit: none
[ 4703.971963] Rebooting in 5 seconds..

Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
usb: chipidea: ci_hdrc_imx: add missing put_device() call in usbmisc_get_init_data() 2021-01-12T19:18:19+00:00 Yu Kuai yukuai3@huawei.com 2020-11-17T01:14:30+00:00 4485bdb99624602d3486fa7bbb6880b76e33dd0f commit 83a43ff80a566de8718dfc6565545a0080ec1fb5 upstream. if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: ef12da914ed6 ("usb: chipidea: imx: properly check for usbmisc") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201117011430.642589-1-yukuai3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 83a43ff80a566de8718dfc6565545a0080ec1fb5 upstream.

if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.

Fixes: ef12da914ed6 ("usb: chipidea: imx: properly check for usbmisc")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201117011430.642589-1-yukuai3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ul 2020-12-26T15:02:40+00:00 Fabio Estevam festevam@gmail.com 2020-12-07T02:09:09+00:00 39fb7424d4edea5080b3531cfbdb80fac5f68a56 commit c7721e15f434920145c376e8fe77e1c079fc3726 upstream. According to the i.MX6UL Errata document: https://www.nxp.com/docs/en/errata/IMX6ULCE.pdf ERR007881 also affects i.MX6UL, so pass the CI_HDRC_DISABLE_DEVICE_STREAMING flag to workaround the issue. Fixes: 52fe568e5d71 ("usb: chipidea: imx: add imx6ul usb support") Cc: <stable@vger.kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201207020909.22483-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c7721e15f434920145c376e8fe77e1c079fc3726 upstream.

According to the i.MX6UL Errata document:
https://www.nxp.com/docs/en/errata/IMX6ULCE.pdf

ERR007881 also affects i.MX6UL, so pass the
CI_HDRC_DISABLE_DEVICE_STREAMING flag to workaround the issue.

Fixes: 52fe568e5d71 ("usb: chipidea: imx: add imx6ul usb support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20201207020909.22483-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: ci_hdrc_imx: restore pinctrl 2020-09-03T08:32:07+00:00 Peter Chen peter.chen@nxp.com 2018-11-01T06:47:20+00:00 71ac680e6339e744d87647a1ca27b2e87dba2eac The pinctrl setting may lost during the system suspend (eg, imx7ulp), it needs to restore them after system resume. Meanwhile, some platforms may need to set special pinctrl for power comsumption. Signed-off-by: Peter Chen <peter.chen@nxp.com> 
The pinctrl setting may lost during the system suspend
(eg, imx7ulp), it needs to restore them after system resume.
Meanwhile, some platforms may need to set special pinctrl
for power comsumption.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
usb: chipidea: imx: add two samsung picophy parameters tuning implementation 2020-08-23T03:40:08+00:00 Peter Chen peter.chen@nxp.com 2019-09-30T05:56:26+00:00 58a3cefb3840b17f0eba357d8e82536135a1257b These two parameters are used to improve USB signal for board level, in this commit, we read it from the dtb, and write to related register during the initialization. Signed-off-by: Peter Chen <peter.chen@nxp.com> 
These two parameters are used to improve USB signal for board level,
in this commit, we read it from the dtb, and write to related register
during the initialization.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Merge tag 'usb-ci-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next 2020-07-29T11:57:09+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-07-29T11:57:09+00:00 107c89497545232acac83d71600d8030b7361ca2 Peter writes: ENDIAN issue fix and one query controller role API is introduced. * tag 'usb-ci-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: imx: get available runtime dr mode for wakeup setting usb: chipidea: add query_available_role interface Documentation: ABI: usb: chipidea: Update Li Jun's e-mail usb: chipidea: udc: fix the ENDIAN issue 
Peter writes:

ENDIAN issue fix and one query controller role API is introduced.

* tag 'usb-ci-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
  usb: chipidea: imx: get available runtime dr mode for wakeup setting
  usb: chipidea: add query_available_role interface
  Documentation: ABI: usb: chipidea: Update Li Jun's e-mail
  usb: chipidea: udc: fix the ENDIAN issue
usb: chipidea: imx: get available runtime dr mode for wakeup setting 2020-07-28T06:12:11+00:00 Peter Chen peter.chen@nxp.com 2020-07-28T06:12:11+00:00 d6f93d21001e4388a25b0b922e02e64bc6004d2f If runtime dr_mode is not dual-role, it doesn't need to enable ID wakeup interrupt. If runtime dr_mode is host, it doesn't need to enable VBUS wakeup interrupt. With these changes, the user will not get the unexpected wakeup for single role use case. For example, the host-only use case at Micro-AB port, the controller should not be waken up by only plug in Micro-AB cable or the Micro-B cable with host. Signed-off-by: Peter Chen <peter.chen@nxp.com> 
If runtime dr_mode is not dual-role, it doesn't need to enable ID
wakeup interrupt.
If runtime dr_mode is host, it doesn't need to enable VBUS
wakeup interrupt.
With these changes, the user will not get the unexpected wakeup
for single role use case. For example, the host-only use case at
Micro-AB port, the controller should not be waken up by only
plug in Micro-AB cable or the Micro-B cable with host.
Signed-off-by: Peter Chen <peter.chen@nxp.com>