linux-stable.git/drivers/usb/chipidea, branch linux-4.8.y

usb: chipidea: move the lock initialization to core file

2016-12-02T08:10:31+00:00

commit a5d906bb261cde5f881a949d3b0fbaa285dcc574 upstream.

This can fix below dump when the lock is accessed at host
mode due to it is not initialized.

[   46.119638] INFO: trying to register non-static key.
[   46.124643] the code is fine but needs lockdep annotation.
[   46.130144] turning off the locking correctness validator.
[   46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210
[   46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree)
[   46.148923] Backtrace:
[   46.151448] [] (dump_backtrace) from [] (show_stack+0x18/0x1c)
[   46.159038]  r7:edf52000
[   46.161412]  r6:60000193
[   46.163967]  r5:00000000
[   46.165035]  r4:c0e25c2c

[   46.169109] [] (show_stack) from [] (dump_stack+0xb4/0xe8)
[   46.176362] [] (dump_stack) from [] (register_lock_class+0x4fc/0x56c)
[   46.184554]  r10:c0e25d24
[   46.187014]  r9:edf53e70
[   46.189569]  r8:c1642444
[   46.190637]  r7:ee9da024
[   46.193191]  r6:00000000
[   46.194258]  r5:00000000
[   46.196812]  r4:00000000
[   46.199185]  r3:00000001

[   46.203259] [] (register_lock_class) from [] (__lock_acquire+0x80/0x10f0)
[   46.211797]  r10:c0e25d24
[   46.214257]  r9:edf53e70
[   46.216813]  r8:ee9da024
[   46.217880]  r7:c1642444
[   46.220435]  r6:edcd1800
[   46.221502]  r5:60000193
[   46.224057]  r4:00000000

[   46.227953] [] (__lock_acquire) from [] (lock_acquire+0x74/0x94)
[   46.235710]  r10:00000001
[   46.238169]  r9:edf53e70
[   46.240723]  r8:edf53f80
[   46.241790]  r7:00000001
[   46.244344]  r6:00000001
[   46.245412]  r5:60000193
[   46.247966]  r4:00000000

[   46.251866] [] (lock_acquire) from [] (_raw_spin_lock_irqsave+0x40/0x54)
[   46.260319]  r7:ee1c6a00
[   46.262691]  r6:c062a570
[   46.265247]  r5:20000113
[   46.266314]  r4:ee9da014

[   46.270393] [] (_raw_spin_lock_irqsave) from [] (ci_port_test_show+0x2c/0x70)
[   46.279280]  r6:eebd2000
[   46.281652]  r5:ee9da010
[   46.284207]  r4:ee9da014

[   46.286810] [] (ci_port_test_show) from [] (seq_read+0x1ac/0x4f8)
[   46.294655]  r9:edf53e70
[   46.297028]  r8:edf53f80
[   46.299583]  r7:ee1c6a00
[   46.300650]  r6:00000001
[   46.303205]  r5:00000000
[   46.304273]  r4:eebd2000
[   46.306850] [] (seq_read) from [] (full_proxy_read+0x54/0x6c)
[   46.314348]  r10:00000000
[   46.316808]  r9:c0a6ad30
[   46.319363]  r8:edf53f80
[   46.320430]  r7:00020000
[   46.322986]  r6:b6de3000
[   46.324053]  r5:ee1c6a00
[   46.326607]  r4:c0248b58

[   46.330505] [] (full_proxy_read) from [] (__vfs_read+0x34/0x118)
[   46.338262]  r9:edf52000
[   46.340635]  r8:c0107fc4
[   46.343190]  r7:00020000
[   46.344257]  r6:edf53f80
[   46.346812]  r5:c039e810
[   46.347879]  r4:ee1c6a00
[   46.350447] [] (__vfs_read) from [] (vfs_read+0x8c/0x11c)
[   46.357597]  r9:edf52000
[   46.359969]  r8:c0107fc4
[   46.362524]  r7:edf53f80
[   46.363592]  r6:b6de3000
[   46.366147]  r5:ee1c6a00
[   46.367214]  r4:00020000
[   46.369782] [] (vfs_read) from [] (SyS_read+0x4c/0xa8)
[   46.376672]  r8:c0107fc4
[   46.379045]  r7:00020000
[   46.381600]  r6:b6de3000
[   46.382667]  r5:ee1c6a00
[   46.385222]  r4:ee1c6a00

[   46.387817] [] (SyS_read) from [] (ret_fast_syscall+0x0/0x1c)
[   46.395314]  r7:00000003
[   46.397687]  r6:b6de3000
[   46.400243]  r5:00020000
[   46.401310]  r4:00020000

Fixes: 26c696c678c4 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci")
Signed-off-by: Peter Chen 
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: host: fix NULL ptr dereference during shutdown

2016-11-10T15:38:56+00:00

commit 991d5add50a5bb6ab8f12f2129f5c7487f6baaf6 upstream.

After commit b09b5224fe86 ("usb: chipidea: implement platform shutdown
callback") and commit 43a404577a93 ("usb: chipidea: host: set host to
be null after hcd is freed") a NULL pointer dereference is caused
on i.MX23 during shutdown. So ensure that role is set to CI_ROLE_END and
we finish interrupt handling before the hcd is deallocated. This avoids
the NULL pointer dereference.

Suggested-by: Alan Stern 
Signed-off-by: Stefan Wahren 
Fixes: b09b5224fe86 ("usb: chipidea: implement platform shutdown callback")
Signed-off-by: Peter Chen 
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase

2016-09-09T09:19:57+00:00

Problems with the signal integrity of the high speed USB data lines or
noise on reference ground lines can cause the i.MX6 USB controller to
violate USB specs and exhibit unexpected behavior.

It was observed that USBi_UI interrupts were triggered first and when
isr_setup_status_phase was called, ci->status was NULL, which lead to a
NULL pointer dereference kernel panic.

This patch fixes the kernel panic, emits a warning once and returns
-EPIPE to halt the device and let the host get stalled.
It also adds a comment to point people, who are experiencing this issue,
to their USB hardware design.

Cc:  #4.1+
Signed-off-by: Clemens Gruber 
Signed-off-by: Peter Chen

usb: chipidea: udc: don't touch DP when controller is in host mode

2016-08-19T01:27:07+00:00

When the controller is configured to be dual role and it's in host mode,
if bind udc and gadgt driver, those gadget operations will do gadget
disconnect and finally pull down DP line, which will break host function.

Cc:  # 4.1+
Signed-off-by: Li Jun 
Signed-off-by: Peter Chen

usb: chipidea: Kconfig: improve Kconfig help text

2016-06-21T02:48:30+00:00

Chipidea driver has been updated a lot, and more functions are supported,
update Kconfig help text accordingly.

Signed-off-by: Peter Chen

usb: chipidea: imx: delete the redundant setting default DMA mask code

2016-04-06T09:14:38+00:00

For each platform devices which is created by device tree, the default
DMA mask is set by of_dma_configure when the device are created. So
delete the redundant code at driver.

Signed-off-by: Peter Chen

Merge tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2016-03-17T21:24:26+00:00

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.6-rc1.

  The normal mess is here, gadget and xhci fixes and updates, and lots
  of other driver updates and cleanups as well.  Full details are in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits)
  USB: core: let USB device know device node
  usb: devio: Add ioctl to disallow detaching kernel USB drivers.
  usb: gadget: f_acm: Fix configfs attr name
  usb: udc: lpc32xx: remove USB PLL and USB OTG clock management
  usb: udc: lpc32xx: remove direct access to clock controller registers
  usb: udc: lpc32xx: switch to clock prepare/unprepare model
  usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable()
  usb: gadget: renesas_usb3: Use ARCH_RENESAS
  usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma()
  usb: dwc2: Add support for Lantiq ARX and XRX SoCs
  usb: phy: generic: Handle late registration of gadget
  usb: gadget: bdc_udc: fix race condition in bdc_udc_exit()
  usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config
  usb: dwc2: Move host-specific core functions into hcd.c
  usb: dwc2: Move register save and restore functions
  usb: dwc2: Use kmem_cache_free()
  usb: dwc2: host: If using uframe scheduler, end splits better
  usb: dwc2: host: Totally redo the microframe scheduler
  usb: dwc2: host: Properly set even/odd frame
  usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call
  ...

usb: chipidea: otg: add A idle to B disconnect timer

2016-03-04T13:14:38+00:00

B-device detects that bus is idle for more than TB_AIDL_BDIS min and
begins HNP by turning off pullup on DP, this allows the bus to discharge
to the SE0 state. This timer was missed and failed with PET test:
6.8.5 B-UUT HNP of USB OTG and EH automated compliance plan v1.2,
this patch is to fix this timing issue.

Acked-by: Peter Chen 
Signed-off-by: Li Jun 
Signed-off-by: Felipe Balbi

usb: chipidea: otg: enable HNP polling support for gadget and host

2016-03-04T13:14:37+00:00

Enable HNP polling support for chipidea gadget and allocate memory
for host request flag when otg fsm init.

Acked-by: Peter Chen 
Signed-off-by: Li Jun 
Signed-off-by: Felipe Balbi

usb: chipidea: otg: set host_request_flag for gadget

2016-03-04T13:14:37+00:00

Set host_request_flag if the current peripheral wants to take host role
via changing a_bus_req or b_bus_req by user application.

Acked-by: Peter Chen 
Signed-off-by: Li Jun 
Signed-off-by: Felipe Balbi