linux-stable.git/drivers/usb/chipidea, branch linux-3.10.y

usb: chipidea: debug: check before accessing ci_role

2017-11-01T21:12:43+00:00

commit 0340ff83cd4475261e7474033a381bc125b45244 upstream.

ci_role BUGs when the role is >= CI_ROLE_END.

Cc: stable@vger.kernel.org  #v3.10+
Signed-off-by: Michael Thalmeier 
Signed-off-by: Peter Chen 
Signed-off-by: Willy Tarreau

usb: chipidea: move the lock initialization to core file

2017-02-06T22:33:09+00:00

commit a5d906bb261cde5f881a949d3b0fbaa285dcc574 upstream.

This can fix below dump when the lock is accessed at host
mode due to it is not initialized.

[   46.119638] INFO: trying to register non-static key.
[   46.124643] the code is fine but needs lockdep annotation.
[   46.130144] turning off the locking correctness validator.
[   46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210
[   46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree)
[   46.148923] Backtrace:
[   46.151448] [] (dump_backtrace) from [] (show_stack+0x18/0x1c)
[   46.159038]  r7:edf52000
[   46.161412]  r6:60000193
[   46.163967]  r5:00000000
[   46.165035]  r4:c0e25c2c

[   46.169109] [] (show_stack) from [] (dump_stack+0xb4/0xe8)
[   46.176362] [] (dump_stack) from [] (register_lock_class+0x4fc/0x56c)
[   46.184554]  r10:c0e25d24
[   46.187014]  r9:edf53e70
[   46.189569]  r8:c1642444
[   46.190637]  r7:ee9da024
[   46.193191]  r6:00000000
[   46.194258]  r5:00000000
[   46.196812]  r4:00000000
[   46.199185]  r3:00000001

[   46.203259] [] (register_lock_class) from [] (__lock_acquire+0x80/0x10f0)
[   46.211797]  r10:c0e25d24
[   46.214257]  r9:edf53e70
[   46.216813]  r8:ee9da024
[   46.217880]  r7:c1642444
[   46.220435]  r6:edcd1800
[   46.221502]  r5:60000193
[   46.224057]  r4:00000000

[   46.227953] [] (__lock_acquire) from [] (lock_acquire+0x74/0x94)
[   46.235710]  r10:00000001
[   46.238169]  r9:edf53e70
[   46.240723]  r8:edf53f80
[   46.241790]  r7:00000001
[   46.244344]  r6:00000001
[   46.245412]  r5:60000193
[   46.247966]  r4:00000000

[   46.251866] [] (lock_acquire) from [] (_raw_spin_lock_irqsave+0x40/0x54)
[   46.260319]  r7:ee1c6a00
[   46.262691]  r6:c062a570
[   46.265247]  r5:20000113
[   46.266314]  r4:ee9da014

[   46.270393] [] (_raw_spin_lock_irqsave) from [] (ci_port_test_show+0x2c/0x70)
[   46.279280]  r6:eebd2000
[   46.281652]  r5:ee9da010
[   46.284207]  r4:ee9da014

[   46.286810] [] (ci_port_test_show) from [] (seq_read+0x1ac/0x4f8)
[   46.294655]  r9:edf53e70
[   46.297028]  r8:edf53f80
[   46.299583]  r7:ee1c6a00
[   46.300650]  r6:00000001
[   46.303205]  r5:00000000
[   46.304273]  r4:eebd2000
[   46.306850] [] (seq_read) from [] (full_proxy_read+0x54/0x6c)
[   46.314348]  r10:00000000
[   46.316808]  r9:c0a6ad30
[   46.319363]  r8:edf53f80
[   46.320430]  r7:00020000
[   46.322986]  r6:b6de3000
[   46.324053]  r5:ee1c6a00
[   46.326607]  r4:c0248b58

[   46.330505] [] (full_proxy_read) from [] (__vfs_read+0x34/0x118)
[   46.338262]  r9:edf52000
[   46.340635]  r8:c0107fc4
[   46.343190]  r7:00020000
[   46.344257]  r6:edf53f80
[   46.346812]  r5:c039e810
[   46.347879]  r4:ee1c6a00
[   46.350447] [] (__vfs_read) from [] (vfs_read+0x8c/0x11c)
[   46.357597]  r9:edf52000
[   46.359969]  r8:c0107fc4
[   46.362524]  r7:edf53f80
[   46.363592]  r6:b6de3000
[   46.366147]  r5:ee1c6a00
[   46.367214]  r4:00020000
[   46.369782] [] (vfs_read) from [] (SyS_read+0x4c/0xa8)
[   46.376672]  r8:c0107fc4
[   46.379045]  r7:00020000
[   46.381600]  r6:b6de3000
[   46.382667]  r5:ee1c6a00
[   46.385222]  r4:ee1c6a00

[   46.387817] [] (SyS_read) from [] (ret_fast_syscall+0x0/0x1c)
[   46.395314]  r7:00000003
[   46.397687]  r6:b6de3000
[   46.400243]  r5:00020000
[   46.401310]  r4:00020000

Fixes: 26c696c678c4 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci")
Signed-off-by: Peter Chen 
Signed-off-by: Willy Tarreau

usb: chipidea: need to mask when writting endptflush and endptprime

2014-03-07T05:30:10+00:00

commit 5bf5dbeda2454296f1984adfbfc8e6f5965ac389 upstream.

ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.

Signed-off-by: Peter Chen 
Signed-off-by: Matthieu CASTET 
Tested-by: Michael Grzeschik 
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: fix id change handling

2013-06-11T23:18:05+00:00

Re-enable chipidea irq even if there's no role changing to do. This is
a problem since b183c19f ("USB: chipidea: re-order irq handling to avoid
unhandled irqs"); when it manifests, chipidea irq gets disabled for good.

Cc: stable@vger.kernel.org # v3.7
Signed-off-by: Alexander Shishkin 
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: fix no transceiver case

2013-06-11T23:18:04+00:00

Since usb phy code does return ERR_PTR() values, make sure that we don't
end up dereferencing them. This is a problem, for example, on platforms
that don't register a phy for chipidea since b7fa5c2a ("usb: phy: return
-ENXIO when PHY layer isn't enabled").

Signed-off-by: Alexander Shishkin 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2013-05-23T16:23:32+00:00

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2

  The majority of these are USB gadget fixes, but they are all small.
  Other than that, some USB host controller fixes, and USB serial driver
  fixes for problems reported with them.

  Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems
  to be almost impossible to get right for all of the different
  platforms these days."

* tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
  USB: cxacru: potential underflow in cxacru_cm_get_array()
  USB: ftdi_sio: Add support for Newport CONEX motor drivers
  USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
  usb: ohci: fix goto wrong tag in err case
  usb: isp1760-if: fix memleak when platform_get_resource fail
  usb: ehci-s5p: fix memleak when fallback to pdata
  USB: serial: clean up chars_in_buffer
  USB: ti_usb_3410_5052: fix chars_in_buffer overhead
  USB: io_ti: fix chars_in_buffer overhead
  USB: ftdi_sio: fix chars_in_buffer overhead
  USB: ftdi_sio: clean up get_modem_status
  USB: serial: add generic wait_until_sent implementation
  USB: serial: add wait_until_sent operation
  USB: set device dma_mask without reference to global data
  USB: Blacklisted Cinterion's PLxx WWAN Interface
  usb: option: Add Telewell TW-LTE 4G
  USB: EHCI: remove bogus #error
  USB: reset resume quirk needed by a hub
  USB: usb-stor: realtek_cr: Fix compile error
  usb, chipidea: fix link error when USB_EHCI_HCD is a module
  ...

drivers/usb/chipidea: don't check resource with devm_ioremap_resource

2013-05-18T09:57:31+00:00

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.

Signed-off-by: Wolfram Sang 
Acked-by: Alexander Shishkin

USB: set device dma_mask without reference to global data

2013-05-17T00:30:52+00:00

Many USB host drivers contain code such as:

if (!pdev->dev.dma_mask)
        pdev->dev.dma_mask = &tegra_ehci_dma_mask;

... where tegra_ehci_dma_mask is a global. I suspect this code originated
in commit 4a53f4e "USB: ehci-tegra: add probing through device tree" and
was simply copied everywhere else.

This works fine when the code is built-in, but can cause a crash when the
code is in a module. The first module load sets up the dma_mask pointer,
but if the module is removed and re-inserted, the value is now non-NULL,
and hence is not updated to point at the new location, and hence points
at a stale location within the previous module load address, which in
turn causes a crash if the pointer is de-referenced.

The simplest way of solving this seems to be to copy the code from
ehci-platform.c, which uses the coherent_dma_mask as the target for the
dma_mask pointer.

Suggested-by: Arnd Bergmann 
Signed-off-by: Stephen Warren 
Acked-by: Tony Prisk 
Signed-off-by: Greg Kroah-Hartman

usb, chipidea: fix link error when USB_EHCI_HCD is a module

2013-05-17T00:28:27+00:00

Fixes link error when USB_EHCI_HCD=m and USB_CHIPIDEA_HOST=y:

	drivers/built-in.o: In function `ci_hdrc_host_init':
	drivers/usb/chipidea/host.c:104: undefined reference to `ehci_init_driver'

as a result of commit 09f6ffde2ece ("USB: EHCI: fix build error by making
ChipIdea host a normal EHCI driver").

Cc: stable@vger.kernel.org [v3.7+]
Signed-off-by: David Rientjes 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2013-04-05T22:18:00+00:00

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi