linux-stable.git/drivers/usb/chipidea/core.c, branch linux-6.2.y

usb: chipidea: fix missing goto in `ci_hdrc_probe`

2023-05-11T14:11:23+00:00

[ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ]

From the comment of ci_usb_phy_init, it returns an error code if
usb_phy_init has failed, and it should do some clean up, not just
return directly.

Fix this by goto the error handling.

Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core")
Reviewed-by: Dongliang Mu 
Acked-by: Peter Chen 
Signed-off-by: Yinhao Hu 
Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: chipidea: core: fix possible concurrent when switch role

2023-03-30T10:51:36+00:00

commit 451b15ed138ec15bffbebb58a00ebdd884c3e659 upstream.

The user may call role_store() when driver is handling
ci_handle_id_switch() which is triggerred by otg event or power lost
event. Unfortunately, the controller may go into chaos in this case.
Fix this by protecting it with mutex lock.

Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: 
Acked-by: Peter Chen 
Signed-off-by: Xu Yang 
Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: chipdea: core: fix return -EINVAL if request role is the same with current role

2023-03-30T10:51:36+00:00

commit 3670de80678961eda7fa2220883fc77c16868951 upstream.

It should not return -EINVAL if the request role is the same with current
role, return non-error and without do anything instead.

Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: 
Acked-by: Peter Chen 
Signed-off-by: Xu Yang 
Link: https://lore.kernel.org/r/20230317061516.2451728-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)

2023-01-17T16:05:02+00:00

After successfully probed, ci->role_switch would only be NULL or a valid
pointer. IS_ERR(ci->role_switch) will always return 0. So no need to wrap
it with IS_ERR, otherwise the logic is wrong.

Fixes: e1b5d2bed67c ("usb: chipidea: core: handle usb role switch in a common way")
cc: 
Signed-off-by: Xu Yang 
Link: https://lore.kernel.org/r/20221215055409.3760523-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: wrap ci_handle_power_lost() with CONFIG_PM_SLEEP

2022-11-09T11:37:44+00:00

If CONFIG_PM_SLEEP is not set, the following error will be shown up
when build kernel:
    error: 'ci_handle_power_lost' defined but not used.

This will move ci_handle_power_lost() to an area wrapped by
CONFIG_PM_SLEEP.

Signed-off-by: Xu Yang 
Fixes: 74494b33211d ("usb: chipidea: core: add controller resume support when controller is powered off")
Reported-by: Conor Dooley 
Tested-by: Conor Dooley 
Link: https://lore.kernel.org/r/20221026121157.1491302-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: handle suspend/resume for each role

2022-10-23T12:34:53+00:00

There may be a need to handle suspend/resume per role. This patch
will add this support.

Signed-off-by: Xu Yang 
Acked-by: Peter Chen 
Link: https://lore.kernel.org/r/20221013151442.3262951-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: add controller resume support when controller is powered off

2022-10-23T12:34:53+00:00

For some SoCs, the controler's power will be off during the system
suspend, and it needs some recovery operation to let the system back
to workable. We add this support in this patch.

Signed-off-by: Xu Yang 
Acked-by: Peter Chen 
Link: https://lore.kernel.org/r/20221013151442.3262951-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: handle usb role switch in a common way

2022-10-23T12:34:52+00:00

Currently, ci_usb_role_switch_set() may be called before system resume
stage when suspended. Worse yet, ci_hdrc device may stay at RPM_ACTIVE
state which will cause pm_runtime_get_sync() fail to resume the device.
In this case, role-switch may unable to complete transition process due
to not exit from lpm state or due to lack some means after system resume.

Same as ci_cable_notifier(), usb_role_switch could handle its events based
on ci_hdrc_cable mechanism.

Signed-off-by: Xu Yang 
Link: https://lore.kernel.org/r/20221009155336.766960-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: implement get_frame

2022-06-21T14:40:51+00:00

The chipidea udc core is capable of reading the current frame index from
hardware. This patch adds the get_frame callback to the driver.

Acked-by: Peter Chen 
Signed-off-by: Michael Grzeschik 
Link: https://lore.kernel.org/r/20220616194459.2981519-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Set the DT node on the child device

2021-12-17T15:52:27+00:00

The ChipIdea glue drivers just copy the glue resources to the "ci_hdrc"
child device. Instead, set the child device's DT node pointer to the
parent device's node so that platform_get_irq() can find the IRQ
resources in the DT. This removes the need for statically populating the
IRQ resources from the DT which has been deprecated for some time.

Acked-by: Peter Chen 
Signed-off-by: Rob Herring 
Link: https://lore.kernel.org/r/20211215225646.1997946-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman