linux-stable.git/drivers/usb/cdns3, branch v5.5 Linux kernel stable tree usb: cdns3: should not use the same dev_id for shared interrupt handler 2019-12-30T19:02:01+00:00 Peter Chen peter.chen@nxp.com 2019-12-27T09:10:04+00:00 af58e1fca9840192f14b6f03c59595d64bff9127 Both drd and gadget interrupt handler use the struct cdns3 pointer as dev_id, it causes devm_free_irq at cdns3_gadget_exit doesn't free gadget's interrupt handler, it freed drd's handler. So, when the host interrupt occurs, the gadget's interrupt hanlder is still called, and causes below oops. To fix it, we use gadget's private data priv_dev as interrupt dev_id for gadget. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000380 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000971d79000 [0000000000000380] pgd=0000000971d6f003, pud=0000000971d6e003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: mxc_jpeg_encdec crct10dif_ce fsl_imx8_ddr_perf CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-03486-g69f4e7d9c54a-dirty #254 Hardware name: Freescale i.MX8QM MEK (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : cdns3_device_irq_handler+0x1c/0xb8 lr : __handle_irq_event_percpu+0x78/0x2c0 sp : ffff800010003e30 x29: ffff800010003e30 x28: ffff8000129bb000 x27: ffff8000126e9000 x26: ffff0008f61b5600 x25: ffff800011fe1018 x24: ffff8000126ea120 x23: ffff800010003f04 x22: 0000000000000000 x21: 0000000000000093 x20: ffff0008f61b5600 x19: ffff0008f5061a80 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 003d090000000000 x13: 00003d0900000000 x12: 0000000000000000 x11: 00003d0900000000 x10: 0000000000000040 x9 : ffff800012708cb8 x8 : ffff800012708cb0 x7 : ffff0008f7c7a9d0 x6 : 0000000000000000 x5 : ffff0008f7c7a910 x4 : ffff8008ed359000 x3 : ffff800010003f40 x2 : 0000000000000000 x1 : ffff0008f5061a80 x0 : ffff800010161a60 Call trace: cdns3_device_irq_handler+0x1c/0xb8 __handle_irq_event_percpu+0x78/0x2c0 handle_irq_event_percpu+0x40/0x98 handle_irq_event+0x4c/0xd0 handle_fasteoi_irq+0xbc/0x168 generic_handle_irq+0x34/0x50 __handle_domain_irq+0x6c/0xc0 gic_handle_irq+0xd4/0x174 el1_irq+0xb8/0x180 arch_cpu_idle+0x3c/0x230 default_idle_call+0x38/0x40 do_idle+0x20c/0x298 cpu_startup_entry+0x28/0x48 rest_init+0xdc/0xe8 arch_call_rest_init+0x14/0x1c start_kernel+0x48c/0x4b8 Code: aa0103f3 aa1e03e0 d503201f f9409662 (f941c040) ---[ end trace 091dcf4dee011b0e ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0002,2100600c Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: <stable@vger.kernel.org> #v5.4 Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1577437804-18146-1-git-send-email-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Both drd and gadget interrupt handler use the struct cdns3 pointer as
dev_id, it causes devm_free_irq at cdns3_gadget_exit doesn't free
gadget's interrupt handler, it freed drd's handler. So, when the
host interrupt occurs, the gadget's interrupt hanlder is still
called, and causes below oops. To fix it, we use gadget's private
data priv_dev as interrupt dev_id for gadget.

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000380
Mem abort info:
  ESR = 0x96000006
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000006
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000971d79000
[0000000000000380] pgd=0000000971d6f003, pud=0000000971d6e003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
Modules linked in: mxc_jpeg_encdec crct10dif_ce fsl_imx8_ddr_perf
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-03486-g69f4e7d9c54a-dirty #254
Hardware name: Freescale i.MX8QM MEK (DT)
pstate: 00000085 (nzcv daIf -PAN -UAO)
pc : cdns3_device_irq_handler+0x1c/0xb8
lr : __handle_irq_event_percpu+0x78/0x2c0
sp : ffff800010003e30
x29: ffff800010003e30 x28: ffff8000129bb000
x27: ffff8000126e9000 x26: ffff0008f61b5600
x25: ffff800011fe1018 x24: ffff8000126ea120
x23: ffff800010003f04 x22: 0000000000000000
x21: 0000000000000093 x20: ffff0008f61b5600
x19: ffff0008f5061a80 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 003d090000000000
x13: 00003d0900000000 x12: 0000000000000000
x11: 00003d0900000000 x10: 0000000000000040
x9 : ffff800012708cb8 x8 : ffff800012708cb0
x7 : ffff0008f7c7a9d0 x6 : 0000000000000000
x5 : ffff0008f7c7a910 x4 : ffff8008ed359000
x3 : ffff800010003f40 x2 : 0000000000000000
x1 : ffff0008f5061a80 x0 : ffff800010161a60
Call trace:
 cdns3_device_irq_handler+0x1c/0xb8
 __handle_irq_event_percpu+0x78/0x2c0
 handle_irq_event_percpu+0x40/0x98
 handle_irq_event+0x4c/0xd0
 handle_fasteoi_irq+0xbc/0x168
 generic_handle_irq+0x34/0x50
 __handle_domain_irq+0x6c/0xc0
 gic_handle_irq+0xd4/0x174
 el1_irq+0xb8/0x180
 arch_cpu_idle+0x3c/0x230
 default_idle_call+0x38/0x40
 do_idle+0x20c/0x298
 cpu_startup_entry+0x28/0x48
 rest_init+0xdc/0xe8
 arch_call_rest_init+0x14/0x1c
 start_kernel+0x48c/0x4b8
Code: aa0103f3 aa1e03e0 d503201f f9409662 (f941c040)
---[ end trace 091dcf4dee011b0e ]---
Kernel panic - not syncing: Fatal exception in interrupt
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,2100600c
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: <stable@vger.kernel.org> #v5.4
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1577437804-18146-1-git-send-email-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next 2019-11-18T07:24:12+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2019-11-18T07:24:12+00:00 7170d1a4cc4d5fe1c55dfd95bddb9df074fe9637 Felipe writes: USB: changes for v5.5 We have TI's glue layer for the Cadence USB3 controller going upstream. Tegra's XUDC driver is also going upstream with this pull request. Apart from these two big features, we have a bunch of patches switching over to devm_platform_ioremap_resource() in order to simplify code a little; and a non-critical fix for DWC3 usage via kexec. * tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (44 commits) usb: dwc3: of-simple: add a shutdown usb: cdns3: Add TI specific wrapper driver dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller usb: mtu3: fix race condition about delayed_status usb: gadget: Add UDC driver for tegra XUSB device mode controller usb: dwc3: debug: Remove newline printout usb: dwc2: use a longer core rest timeout in dwc2_core_reset() usb: gadget: udc: lpc32xx: Use devm_platform_ioremap_resource() in lpc32xx_udc_probe() USB: gadget: udc: clean up an indentation issue usb: gadget: Quieten gadget config message phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq usb: gadget: Remove set but not used variable 'opts' in msg_do_config usb: gadget: Remove set but not used variable 'opts' in acm_ms_do_config usb: mtu3: add a new function to do status stage usb: gadget: configfs: fix concurrent issue between composite APIs usb: gadget: f_tcm: Provide support to get alternate setting in tcm function usb: gadget: Correct NULL pointer checking in fsl gadget usb: fsl: Remove unused variable USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein USB: dummy-hcd: increase max number of devices to 32 ... 
Felipe writes:

USB: changes for v5.5

We have TI's glue layer for the Cadence USB3 controller going
upstream. Tegra's XUDC driver is also going upstream with this pull
request.

Apart from these two big features, we have a bunch of patches switching
over to devm_platform_ioremap_resource() in order to simplify code a
little; and a non-critical fix for DWC3 usage via kexec.

* tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (44 commits)
  usb: dwc3: of-simple: add a shutdown
  usb: cdns3: Add TI specific wrapper driver
  dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller
  usb: mtu3: fix race condition about delayed_status
  usb: gadget: Add UDC driver for tegra XUSB device mode controller
  usb: dwc3: debug: Remove newline printout
  usb: dwc2: use a longer core rest timeout in dwc2_core_reset()
  usb: gadget: udc: lpc32xx: Use devm_platform_ioremap_resource() in lpc32xx_udc_probe()
  USB: gadget: udc: clean up an indentation issue
  usb: gadget: Quieten gadget config message
  phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq
  usb: gadget: Remove set but not used variable 'opts' in msg_do_config
  usb: gadget: Remove set but not used variable 'opts' in acm_ms_do_config
  usb: mtu3: add a new function to do status stage
  usb: gadget: configfs: fix concurrent issue between composite APIs
  usb: gadget: f_tcm: Provide support to get alternate setting in tcm function
  usb: gadget: Correct NULL pointer checking in fsl gadget
  usb: fsl: Remove unused variable
  USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein
  USB: dummy-hcd: increase max number of devices to 32
  ...
usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed host 2019-10-30T13:39:07+00:00 Roger Quadros rogerq@ti.com 2019-10-30T12:16:07+00:00 94e259f81a714c96f381d362228fc4743db49742 Take into account gadget driver's speed limit when programming controller speed. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191030121607.21739-1-rogerq@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Take into account gadget driver's speed limit when programming
controller speed.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20191030121607.21739-1-rogerq@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: cdns3: gadget: reset EP_CLAIMED flag while unloading 2019-10-30T11:52:13+00:00 Sanket Parmar sparmar@cadence.com 2019-10-29T12:24:41+00:00 f5c8d290634a470600e1ce61733ec54d05a897e8 EP_CLAIMED flag is used to track the claimed endpoints. While unloading the module, Reset EP_CLAIMED flag for all enabled endpoints. So that it can be reused. Signed-off-by: Sanket Parmar <sparmar@cadence.com> Acked-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20191029122441.5816-1-sparmar@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
EP_CLAIMED flag is used to track the claimed endpoints. While unloading the
module, Reset EP_CLAIMED flag for all enabled endpoints. So that it can be
reused.

Signed-off-by: Sanket Parmar <sparmar@cadence.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20191029122441.5816-1-sparmar@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: cdns3: Add TI specific wrapper driver 2019-10-29T10:55:09+00:00 Roger Quadros rogerq@ti.com 2019-10-28T09:32:49+00:00 387c359b84f71ca29c1a9fa24293c65a257f6bf5 The J721e platform comes with 2 Cadence USB3 controller instances. This driver supports the TI specific wrapper on this platform. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
The J721e platform comes with 2 Cadence USB3 controller
instances. This driver supports the TI specific wrapper
on this platform.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: cdns3: gadget: Don't manage pullups 2019-10-27T06:58:45+00:00 Roger Quadros rogerq@ti.com 2019-10-23T09:02:32+00:00 f3fb802efaef3662744a2215a51294d52a7cfc0e The USB gadget core is supposed to manage pullups of the controller. Don't manage pullups from within the controller driver. Otherwise, function drivers are not able to keep the controller disconnected from the bus till they are ready. (e.g. g_webcam) Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
The USB gadget core is supposed to manage pullups
of the controller. Don't manage pullups from within
the controller driver. Otherwise, function drivers
are not able to keep the controller disconnected from
the bus till they are ready. (e.g. g_webcam)

Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: cdns3: include host-export,h for cdns3_host_init 2019-10-27T06:58:44+00:00 Ben Dooks (Codethink) ben.dooks@codethink.co.uk 2019-10-17T12:44:27+00:00 5053691a7d62a4ad1566aa923e33f5d21a8016f0 The cdns3_host_init() function is declared in host-export.h but host.c does not include it. Add the include to have the declaration present (and remove the declaration of cdns3_host_exit which is now static). Fixes the following sparse warning: drivers/usb/cdns3/host.c:58:5: warning: symbol 'cdns3_host_init' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 
The cdns3_host_init() function is declared in host-export.h
but host.c does not include it. Add the include to have
the declaration present (and remove the declaration of
cdns3_host_exit which is now static).

Fixes the following sparse warning:

drivers/usb/cdns3/host.c:58:5: warning: symbol 'cdns3_host_init' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
usb: cdns3: Error out if USB_DR_MODE_UNKNOWN in cdns3_core_init_role() 2019-10-18T19:00:15+00:00 Roger Quadros rogerq@ti.com 2019-10-17T07:58:01+00:00 9794476942d8704cfbdef8d5f13427673ab70dcd USB_DR_MODE_UNKNOWN should be treated as error as it is done in cdns3_drd_update_mode(). Fixes: 02ffc26df96b ("usb: cdns3: fix cdns3_core_init_role()") Signed-off-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20191017075801.8734-1-rogerq@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
USB_DR_MODE_UNKNOWN should be treated as error as it is done in
cdns3_drd_update_mode().

Fixes: 02ffc26df96b ("usb: cdns3: fix cdns3_core_init_role()")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20191017075801.8734-1-rogerq@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: cdns3: Fix dequeue implementation. 2019-10-15T18:07:44+00:00 Pawel Laszczak pawell@cadence.com 2019-10-13T09:20:20+00:00 f616c3bda47e314ddb797e969f27081f3c33e3b3 Dequeuing implementation in cdns3_gadget_ep_dequeue gets first request from deferred_req_list and changed TRB associated with it to LINK TRB. This approach is incorrect because deferred_req_list contains requests that have not been placed on hardware RING. In this case driver should just giveback this request to gadget driver. The patch implements new approach that first checks where dequeuing request is located and only when it's on Transfer Ring then changes TRB associated with it to LINK TRB. During processing completed transfers such LINK TRB will be ignored. Reported-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/1570958420-22196-1-git-send-email-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Dequeuing implementation in cdns3_gadget_ep_dequeue gets first request from
deferred_req_list and changed TRB associated with it to LINK TRB.
This approach is incorrect because deferred_req_list contains requests
that have not been placed on hardware RING.  In this case driver should
just giveback this request to gadget driver.

The patch implements new approach that first checks where dequeuing
request is located and only when it's on Transfer Ring then changes TRB
associated with it to LINK TRB.
During processing completed transfers such LINK TRB will be ignored.

Reported-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1570958420-22196-1-git-send-email-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: cdns3: Fix for incorrect DMA mask. 2019-10-10T10:42:09+00:00 Pawel Laszczak pawell@cadence.com 2019-10-07T12:03:23+00:00 eb21a74adaa11846737f503dd618bd35337e2c37 This patch restores the correct DMA mask after switching back to device mode. The issue occurred because Device part of controller use 32 bits DMA and Host side use 64 bits DMA. During loading XHCI driver the DMA mask used by driver is overwritten by XHCI driver so it must be restored to 32 bits. Reported-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Peter Chen <peter.chen@nxp.com> Tested-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/1570449803-15299-1-git-send-email-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch restores the correct DMA mask after switching back to device
mode.
The issue occurred because Device part of controller use 32 bits DMA and
Host side use 64 bits DMA. During loading XHCI driver the DMA mask
used by driver is overwritten by XHCI driver so it must be restored
to 32 bits.

Reported-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/1570449803-15299-1-git-send-email-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>