linux-stable.git/drivers/usb/cdns3, branch linux-6.14.y Linux kernel stable tree usb: cdnsp: fix L1 resume issue for RTL_REVISION_NEW_LPM version 2025-05-18T06:26:05+00:00 Pawel Laszczak pawell@cadence.com 2025-04-25T05:55:40+00:00 9f693dcc913bb62428eabed8c13ba0fb5eefab2c commit 8614ecdb1570e4fffe87ebdc62b613ed66f1f6a6 upstream. The controllers with rtl version larger than RTL_REVISION_NEW_LPM (0x00002700) has bug which causes that controller doesn't resume from L1 state. It happens if after receiving LPM packet controller starts transitioning to L1 and in this moment the driver force resuming by write operation to PORTSC.PLS. It's corner case and happens when write operation to PORTSC occurs during device delay before transitioning to L1 after transmitting ACK time (TL1TokenRetry). Forcing transition from L1->L0 by driver for revision larger than RTL_REVISION_NEW_LPM is not needed, so driver can simply fix this issue through block call of cdnsp_force_l0_go function. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <stable@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/PH7PR07MB9538B55C3A6E71F9ED29E980DD842@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8614ecdb1570e4fffe87ebdc62b613ed66f1f6a6 upstream.

The controllers with rtl version larger than
RTL_REVISION_NEW_LPM (0x00002700) has bug which causes that controller
doesn't resume from L1 state. It happens if after receiving LPM packet
controller starts transitioning to L1 and in this moment the driver force
resuming by write operation to PORTSC.PLS.
It's corner case and happens when write operation to PORTSC occurs during
device delay before transitioning to L1 after transmitting ACK
time (TL1TokenRetry).

Forcing transition from L1->L0 by driver for revision larger than
RTL_REVISION_NEW_LPM is not needed, so driver can simply fix this issue
through block call of cdnsp_force_l0_go function.

Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB9538B55C3A6E71F9ED29E980DD842@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: cdnsp: Fix issue with resuming from L1 2025-05-18T06:26:05+00:00 Pawel Laszczak pawell@cadence.com 2025-04-18T04:55:16+00:00 b3728455e99da921c082c49307416c0889b882d3 commit 241e2ce88e5a494be7a5d44c0697592f1632fbee upstream. In very rare cases after resuming controller from L1 to L0 it reads registers before the clock UTMI have been enabled and as the result driver reads incorrect value. Most of registers are in APB domain clock but some of them (e.g. PORTSC) are in UTMI domain clock. After entering to L1 state the UTMI clock can be disabled. When controller transition from L1 to L0 the port status change event is reported and in interrupt runtime function driver reads PORTSC. During this read operation controller synchronize UTMI and APB domain but UTMI clock is still disabled and in result it reads 0xFFFFFFFF value. To fix this issue driver increases APB timeout value. The issue is platform specific and if the default value of APB timeout is not sufficient then this time should be set Individually for each platform. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <stable@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/PH7PR07MB953846C57973E4DB134CAA71DDBF2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 241e2ce88e5a494be7a5d44c0697592f1632fbee upstream.

In very rare cases after resuming controller from L1 to L0 it reads
registers before the clock UTMI have been enabled and as the result
driver reads incorrect value.
Most of registers are in APB domain clock but some of them (e.g. PORTSC)
are in UTMI domain clock.
After entering to L1 state the UTMI clock can be disabled.
When controller transition from L1 to L0 the port status change event is
reported and in interrupt runtime function driver reads PORTSC.
During this read operation controller synchronize UTMI and APB domain
but UTMI clock is still disabled and in result it reads 0xFFFFFFFF value.
To fix this issue driver increases APB timeout value.

The issue is platform specific and if the default value of APB timeout
is not sufficient then this time should be set Individually for each
platform.

Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB953846C57973E4DB134CAA71DDBF2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: cdns3: Fix deadlock when using NCM gadget 2025-05-02T06:01:53+00:00 Ralph Siemsen ralph.siemsen@linaro.org 2025-03-18T15:09:32+00:00 09e90a9689a4aac7a2f726dc2aa472b0b37937b7 commit a1059896f2bfdcebcdc7153c3be2307ea319501f upstream. The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit 58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget"). Under PREEMPT_RT the deadlock can be readily triggered by heavy network traffic, for example using "iperf --bidir" over NCM ethernet link. The deadlock occurs because the threaded interrupt handler gets preempted by a softirq, but both are protected by the same spinlock. Prevent deadlock by disabling softirq during threaded irq handler. Cc: stable <stable@kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Acked-by: Peter Chen <peter.chen@kernel.org> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20250318-rfs-cdns3-deadlock-v2-1-bfd9cfcee732@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a1059896f2bfdcebcdc7153c3be2307ea319501f upstream.

The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit
58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget").

Under PREEMPT_RT the deadlock can be readily triggered by heavy network
traffic, for example using "iperf --bidir" over NCM ethernet link.

The deadlock occurs because the threaded interrupt handler gets
preempted by a softirq, but both are protected by the same spinlock.
Prevent deadlock by disabling softirq during threaded irq handler.

Cc: stable <stable@kernel.org>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250318-rfs-cdns3-deadlock-v2-1-bfd9cfcee732@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Use str_enable_disable-like helpers 2025-01-15T17:28:13+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-01-14T20:05:39+00:00 f386bfad038d07fc356df267592f5fd812c8cf3e Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-6-c8405df47c19@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read.  Ternary
   operator has three arguments and with wrapping might lead to quite
   long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
   file.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-6-c8405df47c19@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: cdns3: remove redundant if branch 2025-01-03T10:13:52+00:00 Hongyu Xie xiehongyu1@kylinos.cn 2024-12-31T01:36:41+00:00 dedab674428f8a99468a4864c067128ba9ea83a6 cdns->role_sw->dev->driver_data gets set in routines showing below, cdns_init sw_desc.driver_data = cdns; cdns->role_sw = usb_role_switch_register(dev, &sw_desc); dev_set_drvdata(&sw->dev, desc->driver_data); In cdns_resume, cdns->role = cdns_role_get(cdns->role_sw); //line redundant struct cdns *cdns = usb_role_switch_get_drvdata(sw); dev_get_drvdata(&sw->dev) return dev->driver_data return cdns->role; "line redundant" equals to, cdns->role = cdns->role; So fix this if branch. Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20241231013641.23908-1-xiehongyu1@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
cdns->role_sw->dev->driver_data gets set in routines showing below,
cdns_init
  sw_desc.driver_data = cdns;
  cdns->role_sw = usb_role_switch_register(dev, &sw_desc);
    dev_set_drvdata(&sw->dev, desc->driver_data);

In cdns_resume,
cdns->role = cdns_role_get(cdns->role_sw); //line redundant
  struct cdns *cdns = usb_role_switch_get_drvdata(sw);
    dev_get_drvdata(&sw->dev)
      return dev->driver_data
return cdns->role;

"line redundant" equals to,
	cdns->role = cdns->role;

So fix this if branch.

Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20241231013641.23908-1-xiehongyu1@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: cdns3: Synchronise PCI IDs via common data base 2024-11-13T06:16:31+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2024-11-12T16:01:25+00:00 12bbabd3cab8a7dab0ddad8ed1e671f40c7cdeeb There are a few places in the kernel where PCI IDs for different Cadence USB controllers are being used. Besides different naming, they duplicate each other. Make this all in order by providing common definitions via PCI IDs database and use in all users. While doing that, rename definitions as Roger suggested. Suggested-by: Roger Quadros <rogerq@kernel.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20241112160125.2340972-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
There are a few places in the kernel where PCI IDs for different Cadence
USB controllers are being used. Besides different naming, they duplicate
each other. Make this all in order by providing common definitions via
PCI IDs database and use in all users. While doing that, rename
definitions as Roger suggested.

Suggested-by: Roger Quadros <rogerq@kernel.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20241112160125.2340972-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: Switch back to struct platform_driver::remove() 2024-10-04T13:13:03+00:00 Uwe Kleine-König u.kleine-koenig@baylibre.com 2024-09-24T08:43:29+00:00 9a0749d61a9a999fd15813a8f7db0a7a2451a657 After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/usb to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240924084329.53094-2-u.kleine-koenig@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/usb to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240924084329.53094-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sub: cdns3: Use predefined PCI vendor ID constant 2024-09-13T13:39:06+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2024-09-13T13:17:10+00:00 68d4209158f43a558c5553ea95ab0c8975eab18c The PCI vendor ID for Cadence is defined in pci_ids.h. Use it. While at it, move to PCI_DEVICE() macro and usual pattern for PCI class and device IDs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240913131710.3630560-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The PCI vendor ID for Cadence is defined in pci_ids.h. Use it.
While at it, move to PCI_DEVICE() macro and usual pattern for
PCI class and device IDs.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240913131710.3630560-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: fix loss of data on Cadence xHC 2024-09-11T13:38:25+00:00 Pawel Laszczak pawell@cadence.com 2024-09-05T07:03:28+00:00 e5fa8db0be3e8757e8641600c518425a4589b85c Streams should flush their TRB cache, re-read TRBs, and start executing TRBs from the beginning of the new dequeue pointer after a 'Set TR Dequeue Pointer' command. Cadence controllers may fail to start from the beginning of the dequeue TRB as it doesn't clear the Opaque 'RsvdO' field of the stream context during 'Set TR Dequeue' command. This stream context area is where xHC stores information about the last partially executed TD when a stream is stopped. xHC uses this information to resume the transfer where it left mid TD, when the stream is restarted. Patch fixes this by clearing out all RsvdO fields before initializing new Stream transfer using a 'Set TR Dequeue Pointer' command. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable@vger.kernel.org Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/PH7PR07MB95386A40146E3EC64086F409DD9D2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Streams should flush their TRB cache, re-read TRBs, and start executing
TRBs from the beginning of the new dequeue pointer after a 'Set TR Dequeue
Pointer' command.

Cadence controllers may fail to start from the beginning of the dequeue
TRB as it doesn't clear the Opaque 'RsvdO' field of the stream context
during 'Set TR Dequeue' command. This stream context area is where xHC
stores information about the last partially executed TD when a stream
is stopped. xHC uses this information to resume the transfer where it left
mid TD, when the stream is restarted.

Patch fixes this by clearing out all RsvdO fields before initializing new
Stream transfer using a 'Set TR Dequeue Pointer' command.

Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: stable@vger.kernel.org
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB95386A40146E3EC64086F409DD9D2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: cdnsp: Fix incorrect usb_request status 2024-09-11T13:35:23+00:00 Pawel Laszczak pawell@cadence.com 2024-09-06T06:48:54+00:00 1702bec4477cc7d31adb4a760d14d33fac928b7a Fix changes incorrect usb_request->status returned during disabling endpoints. Before fix the status returned during dequeuing requests while disabling endpoint was ECONNRESET. Patch change it to ESHUTDOWN. Patch fixes issue detected during testing UVC gadget. During stopping streaming the class starts dequeuing usb requests and controller driver returns the -ECONNRESET status. After completion requests the class or application "uvc-gadget" try to queue this request again. Changing this status to ESHUTDOWN cause that UVC assumes that endpoint is disabled, or device is disconnected and stops re-queuing usb requests. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable@vger.kernel.org Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/PH7PR07MB9538E8CA7A2096AAF6A3718FDD9E2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Fix changes incorrect usb_request->status returned during disabling
endpoints. Before fix the status returned during dequeuing requests
while disabling endpoint was ECONNRESET.
Patch change it to ESHUTDOWN.

Patch fixes issue detected during testing UVC gadget.
During stopping streaming the class starts dequeuing usb requests and
controller driver returns the -ECONNRESET status. After completion
requests the class or application "uvc-gadget" try to queue this
request again. Changing this status to ESHUTDOWN cause that UVC assumes
that endpoint is disabled, or device is disconnected and stops
re-queuing usb requests.

Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: stable@vger.kernel.org
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB9538E8CA7A2096AAF6A3718FDD9E2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>