linux-stable.git/drivers/ufs/host, branch linux-6.9.y Linux kernel stable tree scsi: ufs: cdns-pltfrm: Perform read back after writing HCLKDIV 2024-05-30T07:44:17+00:00 Andrew Halaney ahalaney@redhat.com 2024-03-29T20:46:48+00:00 4bfc22dbf7bd2d707be1bb1511b4722c11423508 [ Upstream commit b715c55daf598aac8fa339048e4ca8a0916b332e ] Currently, HCLKDIV is written to and then completed with an mb(). mb() ensures that the write completes, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring this bit has taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 Let's do that to ensure the bit hits the device. Because the mb()'s purpose wasn't to add extra ordering (on top of the ordering guaranteed by writel()/readl()), it can safely be removed. Fixes: d90996dae8e4 ("scsi: ufs: Add UFS platform driver for Cadence UFS") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-6-181252004586@redhat.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b715c55daf598aac8fa339048e4ca8a0916b332e ]

Currently, HCLKDIV is written to and then completed with an mb().

mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.

Fixes: d90996dae8e4 ("scsi: ufs: Add UFS platform driver for Cadence UFS")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-6-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scsi: ufs: qcom: Perform read back after writing CGC enable 2024-05-30T07:44:17+00:00 Andrew Halaney ahalaney@redhat.com 2024-03-29T20:46:47+00:00 bb5f55793df6e9ea007c5e8fcbe91d49ced371ed [ Upstream commit d9488511b3ac7eb48a91bc5eded7027525525e03 ] Currently, the CGC enable bit is written and then an mb() is used to ensure that completes before continuing. mb() ensures that the write completes, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring this bit has taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 Let's do that to ensure the bit hits the device. Because the mb()'s purpose wasn't to add extra ordering (on top of the ordering guaranteed by writel()/readl()), it can safely be removed. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Can Guo <quic_cang@quicinc.com> Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-5-181252004586@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d9488511b3ac7eb48a91bc5eded7027525525e03 ]

Currently, the CGC enable bit is written and then an mb() is used to ensure
that completes before continuing.

mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-5-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scsi: ufs: qcom: Perform read back after writing unipro mode 2024-05-30T07:44:17+00:00 Andrew Halaney ahalaney@redhat.com 2024-03-29T20:46:46+00:00 e216cf5d0fc857eb1c1c6a4f7b90c62c29cc7410 [ Upstream commit 823150ecf04f958213cf3bf162187cd1a91c885c ] Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to ensure that completes before continuing. mb() ensures that the write completes, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring this bit has taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 But, there's really no reason to even ensure completion before continuing. The only requirement here is that this write is ordered to this endpoint (which readl()/writel() guarantees already). For that reason the mb() can be dropped altogether without anything forcing completion. Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-4-181252004586@redhat.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 823150ecf04f958213cf3bf162187cd1a91c885c ]

Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to
ensure that completes before continuing.

mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.

Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-4-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scsi: ufs: qcom: Perform read back after writing REG_UFS_SYS1CLK_1US 2024-05-30T07:44:17+00:00 Andrew Halaney ahalaney@redhat.com 2024-03-29T20:46:44+00:00 d0ae42c1574ed3c69770491560921895fb43e32d [ Upstream commit a862fafa263aea0f427d51aca6ff7fd9eeaaa8bd ] Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure that write has gone through to the device. mb() ensures that the write completes, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring this bit has taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 Let's do that to ensure the bit hits the device. Because the mb()'s purpose wasn't to add extra ordering (on top of the ordering guaranteed by writel()/readl()), it can safely be removed. Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-2-181252004586@redhat.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a862fafa263aea0f427d51aca6ff7fd9eeaaa8bd ]

Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
that write has gone through to the device.

mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.

Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-2-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scsi: ufs: qcom: Perform read back after writing reset bit 2024-05-30T07:44:16+00:00 Andrew Halaney ahalaney@redhat.com 2024-03-29T20:46:43+00:00 658314c8aff605d052b05379501d92c26594d46f [ Upstream commit c4d28e06b0c94636f6e35d003fa9ebac0a94e1ae ] Currently, the reset bit for the UFS provided reset controller (used by its phy) is written to, and then a mb() happens to try and ensure that hit the device. Immediately afterwards a usleep_range() occurs. mb() ensures that the write completes, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring this bit has taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 Let's do that to ensure the bit hits the device. By doing so and guaranteeing the ordering against the immediately following usleep_range(), the mb() can safely be removed. Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-1-181252004586@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c4d28e06b0c94636f6e35d003fa9ebac0a94e1ae ]

Currently, the reset bit for the UFS provided reset controller (used by its
phy) is written to, and then a mb() happens to try and ensure that hit the
device. Immediately afterwards a usleep_range() occurs.

mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure the bit hits the device. By doing so and
guaranteeing the ordering against the immediately following usleep_range(),
the mb() can safely be removed.

Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-1-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5 2024-04-08T19:06:56+00:00 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org 2024-04-03T13:20:03+00:00 8db8f6ce556af60ca9a9fd5e826d369ded70fcc7 These entries are necessary to scale the interconnect bandwidth while operating in Gear 5. Cc: Amit Pundir <amit.pundir@linaro.org> Fixes: 03ce80a1bb86 ("scsi: ufs: qcom: Add support for scaling interconnects") Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20240403-ufs-icc-fix-v2-1-958412a5eb45@linaro.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
These entries are necessary to scale the interconnect bandwidth while
operating in Gear 5.

Cc: Amit Pundir <amit.pundir@linaro.org>
Fixes: 03ce80a1bb86 ("scsi: ufs: qcom: Add support for scaling interconnects")
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240403-ufs-icc-fix-v2-1-958412a5eb45@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge branch '6.9/scsi-queue' into 6.9/scsi-fixes 2024-03-25T18:03:35+00:00 Martin K. Petersen martin.petersen@oracle.com 2024-03-25T18:03:35+00:00 f02fe780f28db435671fcc7c0214556e253b5a46 Pull in the outstanding updates from the 6.9/scsi-queue branch. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
Pull in the outstanding updates from the 6.9/scsi-queue branch.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi 2024-03-16T23:31:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-16T23:31:12+00:00 741e9d668aa50c91e4f681511ce0e408d55dd7ce Pull SCSI updates from James Bottomley: "Only a couple of driver updates this time (lpfc and mpt3sas) plus the usual assorted minor fixes and updates. The major core update is a set of patches moving retries out of the drivers and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (84 commits) scsi: core: Constify the struct device_type usage scsi: libfc: replace deprecated strncpy() with memcpy() scsi: lpfc: Replace deprecated strncpy() with strscpy() scsi: bfa: Fix function pointer type mismatch for state machines scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn scsi: bfa: Remove additional unnecessary struct declarations scsi: csiostor: Avoid function pointer casts scsi: qla1280: Remove redundant assignment to variable 'mr' scsi: core: Make scsi_bus_type const scsi: core: Really include kunit tests with SCSI_LIB_KUNIT_TEST scsi: target: tcm_loop: Make tcm_loop_lld_bus const scsi: scsi_debug: Make pseudo_lld_bus const scsi: iscsi: Make iscsi_flashnode_bus const scsi: fcoe: Make fcoe_bus_type const scsi: lpfc: Copyright updates for 14.4.0.0 patches scsi: lpfc: Update lpfc version to 14.4.0.0 scsi: lpfc: Change lpfc_vport load_flag member into a bitmask scsi: lpfc: Change lpfc_vport fc_flag member into a bitmask scsi: lpfc: Protect vport fc_nodes list with an explicit spin lock scsi: lpfc: Change nlp state statistic counters into atomic_t ... 
Pull SCSI updates from James Bottomley:
 "Only a couple of driver updates this time (lpfc and mpt3sas) plus the
  usual assorted minor fixes and updates. The major core update is a set
  of patches moving retries out of the drivers and into the core"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (84 commits)
  scsi: core: Constify the struct device_type usage
  scsi: libfc: replace deprecated strncpy() with memcpy()
  scsi: lpfc: Replace deprecated strncpy() with strscpy()
  scsi: bfa: Fix function pointer type mismatch for state machines
  scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
  scsi: bfa: Remove additional unnecessary struct declarations
  scsi: csiostor: Avoid function pointer casts
  scsi: qla1280: Remove redundant assignment to variable 'mr'
  scsi: core: Make scsi_bus_type const
  scsi: core: Really include kunit tests with SCSI_LIB_KUNIT_TEST
  scsi: target: tcm_loop: Make tcm_loop_lld_bus const
  scsi: scsi_debug: Make pseudo_lld_bus const
  scsi: iscsi: Make iscsi_flashnode_bus const
  scsi: fcoe: Make fcoe_bus_type const
  scsi: lpfc: Copyright updates for 14.4.0.0 patches
  scsi: lpfc: Update lpfc version to 14.4.0.0
  scsi: lpfc: Change lpfc_vport load_flag member into a bitmask
  scsi: lpfc: Change lpfc_vport fc_flag member into a bitmask
  scsi: lpfc: Protect vport fc_nodes list with an explicit spin lock
  scsi: lpfc: Change nlp state statistic counters into atomic_t
  ...
scsi: ufs: qcom: Provide default cycles_in_1us value 2024-03-10T22:09:29+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2024-02-18T13:56:34+00:00 81e2c1a0f8d3f62f4c9e80b20270aa3481c40524 The MSM8996 DT doesn't provide frequency limits for the core_clk_unipro clock, which results in miscalculation of the cycles_in_1us value. Provide the backwards-compatible default to support existing MSM8996 DT files. Fixes: b4e13e1ae95e ("scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES") Cc: Nitin Rawat <quic_nitirawa@quicinc.com> Cc: stable@vger.kernel.org # 6.7.x Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240218-msm8996-fix-ufs-v3-1-40aab49899a3@linaro.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
The MSM8996 DT doesn't provide frequency limits for the core_clk_unipro
clock, which results in miscalculation of the cycles_in_1us value.  Provide
the backwards-compatible default to support existing MSM8996 DT files.

Fixes: b4e13e1ae95e ("scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES")
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: stable@vger.kernel.org # 6.7.x
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240218-msm8996-fix-ufs-v3-1-40aab49899a3@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
irqchip: Convert all platform MSI users to the new API 2024-02-15T16:55:40+00:00 Thomas Gleixner tglx@linutronix.de 2024-01-27T16:17:34+00:00 14fd06c776b5289a43c91cdc64bac3bdbc7b397e Switch all the users of the platform MSI domain over to invoke the new interfaces which branch to the original platform MSI functions when the irqdomain associated to the caller device does not yet provide MSI parent functionality. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240127161753.114685-7-apatel@ventanamicro.com 
Switch all the users of the platform MSI domain over to invoke the new
interfaces which branch to the original platform MSI functions when the
irqdomain associated to the caller device does not yet provide MSI parent
functionality.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-7-apatel@ventanamicro.com