linux-stable.git/drivers/tty, branch v6.6.4

hvc/xen: fix event channel handling for secondary consoles

2023-11-28T17:19:57+00:00

commit ef5dd8ec88ac11e8e353164407d55b73c988b369 upstream.

The xencons_connect_backend() function allocates a local interdomain
event channel with xenbus_alloc_evtchn(), then calls
bind_interdomain_evtchn_to_irq_lateeoi() to bind to that port# on the
*remote* domain.

That doesn't work very well:

(qemu) device_add xen-console,id=con1,chardev=pty0
[   44.323872] xenconsole console-1: 2 xenbus_dev_probe on device/console/1
[   44.323995] xenconsole: probe of console-1 failed with error -2

Fix it to use bind_evtchn_to_irq_lateeoi(), which does the right thing
by just binding that *local* event channel to an irq. The backend will
do the interdomain binding.

This didn't affect the primary console because the setup for that is
special — the toolstack allocates the guest event channel and the guest
discovers it with HVMOP_get_param.

Fixes: fe415186b43d ("xen/console: harden hvc_xen against event channel storms")
Signed-off-by: David Woodhouse 
Reviewed-by: Juergen Gross 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-2-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman

hvc/xen: fix error path in xen_hvc_init() to always register frontend driver

2023-11-28T17:19:57+00:00

commit 2704c9a5593f4a47620c12dad78838ca62b52f48 upstream.

The xen_hvc_init() function should always register the frontend driver,
even when there's no primary console — as there may be secondary consoles.
(Qemu can always add secondary consoles, but only the toolstack can add
the primary because it's special.)

Signed-off-by: David Woodhouse 
Reviewed-by: Juergen Gross 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-3-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman

hvc/xen: fix console unplug

2023-11-28T17:19:57+00:00

commit a30badfd7c13fc8763a9e10c5a12ba7f81515a55 upstream.

On unplug of a Xen console, xencons_disconnect_backend() unconditionally
calls free_irq() via unbind_from_irqhandler(), causing a warning of
freeing an already-free IRQ:

(qemu) device_del con1
[   32.050919] ------------[ cut here ]------------
[   32.050942] Trying to free already-free IRQ 33
[   32.050990] WARNING: CPU: 0 PID: 51 at kernel/irq/manage.c:1895 __free_irq+0x1d4/0x330

It should be using evtchn_put() to tear down the event channel binding,
and let the Linux IRQ side of it be handled by notifier_del_irq() through
the HVC code.

On which topic... xencons_disconnect_backend() should call hvc_remove()
*first*, rather than tearing down the event channel and grant mapping
while they are in use. And then the IRQ is guaranteed to be freed by
the time it's torn down by evtchn_put().

Since evtchn_put() also closes the actual event channel, avoid calling
xenbus_free_evtchn() except in the failure path where the IRQ was not
successfully set up.

However, calling hvc_remove() at the start of xencons_disconnect_backend()
still isn't early enough. An unplug request is indicated by the backend
setting its state to XenbusStateClosing, which triggers a notification
to xencons_backend_changed(), which... does nothing except set its own
frontend state directly to XenbusStateClosed without *actually* tearing
down the HVC device or, you know, making sure it isn't actively in use.

So the backend sees the guest frontend set its state to XenbusStateClosed
and stops servicing the interrupt... and the guest spins for ever in the
domU_write_console() function waiting for the ring to drain.

Fix that one by calling hvc_remove() from xencons_backend_changed() before
signalling to the backend that it's OK to proceed with the removal.

Tested with 'dd if=/dev/zero of=/dev/hvc1' while telling Qemu to remove
the console device.

Signed-off-by: David Woodhouse 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-4-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

tty: serial: meson: fix hard LOCKUP on crtscts mode

2023-11-28T17:19:57+00:00

commit 2a1d728f20edeee7f26dc307ed9df4e0d23947ab upstream.

There might be hard lockup if we set crtscts mode on port without RTS/CTS configured:

# stty -F /dev/ttyAML6 crtscts; echo 1 > /dev/ttyAML6; echo 2 > /dev/ttyAML6
[   95.890386] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[   95.890857] rcu:     3-...0: (201 ticks this GP) idle=e33c/1/0x4000000000000000 softirq=5844/5846 fqs=4984
[   95.900212] rcu:     (detected by 2, t=21016 jiffies, g=7753, q=296 ncpus=4)
[   95.906972] Task dump for CPU 3:
[   95.910178] task:bash            state:R  running task     stack:0     pid:205   ppid:1      flags:0x00000202
[   95.920059] Call trace:
[   95.922485]  __switch_to+0xe4/0x168
[   95.925951]  0xffffff8003477508
[   95.974379] watchdog: Watchdog detected hard LOCKUP on cpu 3
[   95.974424] Modules linked in: 88x2cs(O) rtc_meson_vrtc

Possible solution would be to not allow to setup crtscts on such port.

Tested on S905X3 based board.

Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Krasavin 
Reviewed-by: Neil Armstrong 
Reviewed-by: Dmitry Rokosov 
Signed-off-by: Greg Kroah-Hartman

tty/sysrq: replace smp_processor_id() with get_cpu()

2023-11-28T17:19:57+00:00

commit dd976a97d15b47656991e185a94ef42a0fa5cfd4 upstream.

The smp_processor_id() shouldn't be called from preemptible code.
Instead use get_cpu() and put_cpu() which disables preemption in
addition to getting the processor id. Enable preemption back after
calling schedule_work() to make sure that the work gets scheduled on all
cores other than the current core. We want to avoid a scenario where
current core's stack trace is printed multiple times and one core's
stack trace isn't printed because of scheduling of current task.

This fixes the following bug:

[  119.143590] sysrq: Show backtrace of all active CPUs
[  119.143902] BUG: using smp_processor_id() in preemptible [00000000] code: bash/873
[  119.144586] caller is debug_smp_processor_id+0x20/0x30
[  119.144827] CPU: 6 PID: 873 Comm: bash Not tainted 5.10.124-dirty #3
[  119.144861] Hardware name: QEMU QEMU Virtual Machine, BIOS 2023.05-1 07/22/2023
[  119.145053] Call trace:
[  119.145093]  dump_backtrace+0x0/0x1a0
[  119.145122]  show_stack+0x18/0x70
[  119.145141]  dump_stack+0xc4/0x11c
[  119.145159]  check_preemption_disabled+0x100/0x110
[  119.145175]  debug_smp_processor_id+0x20/0x30
[  119.145195]  sysrq_handle_showallcpus+0x20/0xc0
[  119.145211]  __handle_sysrq+0x8c/0x1a0
[  119.145227]  write_sysrq_trigger+0x94/0x12c
[  119.145247]  proc_reg_write+0xa8/0xe4
[  119.145266]  vfs_write+0xec/0x280
[  119.145282]  ksys_write+0x6c/0x100
[  119.145298]  __arm64_sys_write+0x20/0x30
[  119.145315]  el0_svc_common.constprop.0+0x78/0x1e4
[  119.145332]  do_el0_svc+0x24/0x8c
[  119.145348]  el0_svc+0x10/0x20
[  119.145364]  el0_sync_handler+0x134/0x140
[  119.145381]  el0_sync+0x180/0x1c0

Cc: jirislaby@kernel.org
Cc: stable@vger.kernel.org
Fixes: 47cab6a722d4 ("debug lockups: Improve lockup detection, fix generic arch fallback")
Signed-off-by: Muhammad Usama Anjum 
Link: https://lore.kernel.org/r/20231009162021.3607632-1-usama.anjum@collabora.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

tty: vcc: Add check for kstrdup() in vcc_probe()

2023-11-28T17:19:45+00:00

[ Upstream commit d81ffb87aaa75f842cd7aa57091810353755b3e6 ]

Add check for the return value of kstrdup() and return the error, if it
fails in order to avoid NULL pointer dereference.

Signed-off-by: Yi Yang 
Reviewed-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20230904035220.48164-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty: tty_jobctrl: fix pid memleak in disassociate_ctty()

2023-11-20T10:59:25+00:00

[ Upstream commit 11e7f27b79757b6586645d87b95d5b78375ecdfc ]

There is a pid leakage:
------------------------------
unreferenced object 0xffff88810c181940 (size 224):
  comm "sshd", pid 8191, jiffies 4294946950 (age 524.570s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de  .............N..
    ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff  ....kkkk........
  backtrace:
    [] kmem_cache_alloc+0x5c6/0x9b0
    [] alloc_pid+0x72/0x570
    [] copy_process+0x1374/0x2470
    [] kernel_clone+0xb7/0x900
    [] __se_sys_clone+0x85/0xb0
    [] __x64_sys_clone+0x2b/0x30
    [] do_syscall_64+0x32/0x80
    [] entry_SYSCALL_64_after_hwframe+0x61/0xc6

It turns out that there is a race condition between disassociate_ctty() and
tty_signal_session_leader(), which caused this leakage.

The pid memleak is triggered by the following race:
task[sshd]                     task[bash]
-----------------------        -----------------------
                               disassociate_ctty();
                               spin_lock_irq(¤t->sighand->siglock);
                               put_pid(current->signal->tty_old_pgrp);
                               current->signal->tty_old_pgrp = NULL;
                               tty = tty_kref_get(current->signal->tty);
                               spin_unlock_irq(¤t->sighand->siglock);
tty_vhangup();
tty_lock(tty);
...
tty_signal_session_leader();
spin_lock_irq(&p->sighand->siglock);
...
if (tty->ctrl.pgrp) //tty->ctrl.pgrp is not NULL
p->signal->tty_old_pgrp = get_pid(tty->ctrl.pgrp); //An extra get
spin_unlock_irq(&p->sighand->siglock);
...
tty_unlock(tty);
                               if (tty) {
                                   tty_lock(tty);
                                   ...
                                   put_pid(tty->ctrl.pgrp);
                                   tty->ctrl.pgrp = NULL; //It's too late
                                   ...
                                   tty_unlock(tty);
                               }

The issue is believed to be introduced by commit c8bcd9c5be24 ("tty:
Fix ->session locking") who moves the unlock of siglock in
disassociate_ctty() above "if (tty)", making a small window allowing
tty_signal_session_leader() to kick in. It can be easily reproduced by
adding a delay before "if (tty)" and at the entrance of
tty_signal_session_leader().

To fix this issue, we move "put_pid(current->signal->tty_old_pgrp)" after
"tty->ctrl.pgrp = NULL".

Fixes: c8bcd9c5be24 ("tty: Fix ->session locking")
Signed-off-by: Yi Yang 
Co-developed-by: GUO Zihua 
Signed-off-by: GUO Zihua 
Link: https://lore.kernel.org/r/20230831023329.165737-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: core: Fix runtime PM handling for pending tx

2023-11-08T10:56:24+00:00

commit 6f699743aebf07538e506a46c5965eb8bdd2c716 upstream.

Richard reported that a serial port may end up sometimes with tx data
pending in the buffer for long periods of time.

Turns out we bail out early on any errors from pm_runtime_get(),
including -EINPROGRESS. To fix the issue, we need to ignore -EINPROGRESS
as we only care about the runtime PM usage count at this point. We check
for an active runtime PM state later on for tx.

Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable 
Reported-by: Richard Purdie 
Cc: Bruce Ashfield 
Cc: Mikko Rapeli 
Cc: Paul Gortmaker 
Cc: Randy MacLeod 
Signed-off-by: Tony Lindgren 
Tested-by: Richard Purdie 
Link: https://lore.kernel.org/r/20231023074856.61896-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman

tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks

2023-11-08T10:56:24+00:00

commit e4876dacaca46a1b09f9b417480924ab12019a5b upstream.

Some of the later revisions of the Brainboxes PX cards are based
on the Oxford Semiconductor chipset. Due to the chip's unique setup
these cards need to be initialised.
Previously these were tested against a reference card with the same broken
baudrate on another PC, cancelling out the effect. With this patch they
work and can transfer/receive find against an FTDI-based device.

Add all of the cards which require this setup to the quirks table.
Thanks to Maciej W. Rozycki for clarification on this chip.

Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams 
Link: https://lore.kernel.org/r/DU0PR02MB7899D222A4AB2A4E8C57108FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman

tty: 8250: Add support for Intashield IX cards

2023-11-08T10:56:24+00:00

commit 62d2ec2ded278c7512d91ca7bf8eb9bac46baf90 upstream.

Add support for the IX-100, IX-200 and IX-400 serial cards.

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams 
Link: https://lore.kernel.org/r/DU0PR02MB7899614E5837E82A03272A4BC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman